Important Safety Information
WARNING: During assembly, handle included tools with care. Be cautious of sharp metal edges. Do not exceed the maximum load capacity of 300 kg (660 lbs).
- Keep all parts and packaging materials away from children.
- Ensure all bolts and screws are securely tightened before use.
- Periodically check and re-tighten all connections.
- Do not stand or jump on the bed frame.
- Use only on a flat, level surface.
Package Contents
Before beginning assembly, verify that all components are present. If any parts are missing or damaged, please contact Zinus customer support.
- Headboard components
- Side rails
- Center support beam
- Metal slats
- Support legs
- Assembly tools (ratchet wrench, Allen key)
- Hardware pack (bolts, washers, nuts)
- Installation Manual
Setup and Assembly Instructions
Assembly is designed to be straightforward and can be completed in minutes with the included tools. Follow the numbered steps carefully.
Figure 1: Overview of the easy assembly process, highlighting quick setup, included tools, and numbered parts.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches. Identify all parts against the package contents list.
- Assemble Headboard: Attach the headboard components together using the provided bolts and the ratchet wrench. Ensure all connections are snug but do not overtighten initially.
- Attach Side Rails: Connect the side rails to the assembled headboard using the appropriate hardware.
- Install Center Support: Secure the center support beam to the side rails. This beam often has adjustable feet for leveling.
- Place Slats: Position the metal slats across the frame. The slats are designed to interlock or secure into place for enhanced stability.
- Secure Slats and Frame: Ensure all metal slats are securely fastened to the frame. The robust steel base and frame provide reliable support.
- Final Tightening: Once all parts are assembled, go back and fully tighten all bolts and screws. Do not overtighten.
- Place Mattress: Carefully place your mattress (sold separately) onto the assembled bed frame.
Figure 2: Detail of the bed frame's construction, showing how slats interlock for stability, the foldable design, and an anti-slip pad on the leg.
Figure 3: Illustration of the secured metal slats and the robust steel construction of the bed frame.
Figure 4: The Zinus Elias bed frame fully assembled and ready for use.
Operating Instructions
The Zinus Elias bed frame is designed for stable and comfortable sleep. To ensure optimal performance and longevity:
- Ensure your mattress is properly centered on the frame.
- Do not exceed the maximum weight capacity of 300 kg (660 lbs), including the mattress and occupants.
- Utilize the 30 cm (approximately 11.8 inches) of under-bed clearance for storage, keeping your bedroom organized.
Figure 5: Illustration of the ample under-bed storage space provided by the bed frame.
Figure 6: Example of utilizing the under-bed storage space.
Maintenance
- Cleaning: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Connection Checks: Periodically (every 3-6 months) inspect all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Inspection: Check for any signs of wear or damage to the frame or slats. If damage is found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Squeaking noises | Loose bolts or connections. | Re-tighten all bolts and screws. Ensure slats are properly seated. |
| Bed frame feels unstable | Uneven floor; loose connections; incorrect assembly. | Ensure the bed is on a level surface. Check and tighten all connections. Review assembly steps. |
| Mattress sliding | No anti-slip measures; incorrect mattress size. | Ensure the mattress fits correctly. Consider using an anti-slip mat between the mattress and slats if needed. |
Specifications
- Brand: Zinus
- Model Number: EU-FBMMHCZC-12F
- Color: Black
- Material: Metal (Steel)
- Product Dimensions (L x W x H): 195 x 140 x 90.7 cm (76.8 x 55.1 x 35.7 inches)
- Compatible Mattress Size: 140 x 190 cm (Queen size equivalent in some regions)
- Under-bed Clearance: Approximately 30 cm (11.8 inches)
- Item Weight: 13.5 kg (29.8 lbs)
- Maximum Load Capacity: 300 kg (660 lbs)
- Special Features: All tools included, no box spring needed, durable structure, easy assembly, squeak-resistant.
Figure 7: Detailed dimensions of the Zinus Elias bed frame.
Warranty Information
The Zinus Elias Metal Bed Frame comes with a 5-year limited warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the documentation included with your product or visit the official Zinus website.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Zinus customer support:
- Website: www.zinus.com
- Email: Refer to Zinus website for regional contact information.
- Phone: Refer to Zinus website for regional contact information.
Please have your model number (EU-FBMMHCZC-12F) and purchase date ready when contacting support.
