Timex Digital Quartz Men's Watch TW2V97900 User Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your Timex Digital Quartz Men's Watch, model TW2V97900, also known as the UFC Brawler. This watch features a digital display, chronograph, alarm, calendar, and timer functions, designed for daily use and active lifestyles.

Figure 1: Front view of the Timex Digital Quartz Men's Watch TW2V97900. The watch features a black resin case, a digital display, and a black silicone strap. The iconic UFC octagon cut is visible around the display.

Setup

Before using your watch, it is important to set the correct time and date. Your watch typically has multiple buttons for navigation and setting. For this model, we will refer to them as MODE, SET, START/STOP, and LIGHT.

Setting Time and Date

1. Press the MODE button repeatedly until the time display starts flashing, indicating it is in setting mode.
2. Use the SET button to cycle through the settings (e.g., hours, minutes, 12/24-hour format, year, month, day).
3. While a specific setting is flashing, use the START/STOP button to adjust the value (increase or decrease).
4. Once all settings are correct, press the MODE button again to exit the setting mode and return to the normal time display.

Operating Instructions

Your Timex TW2V97900 watch offers several functions accessible via the MODE button.

Using the Chronograph (Stopwatch)

1. From the normal time display, press the MODE button until "CHRONO" or "STOPW" appears on the screen. The display will show "00:00:00".
2. Press the START/STOP button to begin timing.
3. Press the START/STOP button again to pause the timing.
4. To resume, press START/STOP again.
5. To reset the chronograph to zero, press the SET button while the chronograph is paused.

Setting and Using the Alarm

1. From the normal time display, press the MODE button until "ALARM" or "AL" appears.
2. Press the SET button to enter alarm setting mode. The hour digits will flash.
3. Use the START/STOP button to adjust the hour.
4. Press SET again to move to the minute digits, then use START/STOP to adjust the minutes.
5. Press SET once more to confirm the alarm time.
6. To activate or deactivate the alarm, press the START/STOP button while in the "ALARM" display mode (not setting mode). An alarm icon will appear/disappear.
7. When the alarm sounds, press any button to silence it.

Using the Timer

1. From the normal time display, press the MODE button until "TIMER" or "TMR" appears.
2. Press the SET button to enter timer setting mode. The hour digits will flash.
3. Use the START/STOP button to adjust the hours, then press SET to move to minutes, and again for seconds.
4. Once the desired countdown time is set, press SET to confirm.
5. Press the START/STOP button to begin the countdown.
6. Press START/STOP again to pause/resume the timer.
7. To reset the timer to its initial set time, press the SET button while the timer is paused.

Activating the INDIGLO® Light

To illuminate the watch face in low-light conditions, press the LIGHT button. The INDIGLO® backlight will activate for a few seconds.

Maintenance

Water Resistance

Your Timex TW2V97900 watch is water resistant to 3 BAR (30 meters). This rating means the watch is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Avoid pressing buttons while the watch is wet to prevent water ingress.

Cleaning Your Watch

To clean your watch, wipe it gently with a soft, damp cloth. Do not use harsh chemicals or abrasive materials, as these can damage the case or strap. For the silicone strap, mild soap and water can be used, ensuring to rinse thoroughly and dry completely.

Battery Replacement

The watch is powered by one battery (included). When the display becomes dim or functions become erratic, it may be time to replace the battery. Timex recommends having battery replacement performed by a qualified watch technician or an authorized Timex service center to ensure proper sealing and water resistance.

Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Consider replacing the battery.
• Time is incorrect: Re-set the time and date following the "Setting Time and Date" instructions. Ensure the 12/24-hour format is correctly selected.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). If the issue persists, a battery replacement might be needed, or a soft reset (if possible, by holding all buttons for a few seconds, though this is not a standard feature on all watches).
• Water inside the watch: If condensation or water droplets appear inside the watch, stop using it immediately and take it to an authorized service center. This indicates a breach in water resistance.

Specifications

Warranty and Support

Your Timex TW2V97900 watch comes with a 2-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.

For warranty claims, service, or technical support, please refer to the official Timex website or contact their customer service department. Keep your proof of purchase for warranty validation.

Timex Official Website: www.timex.com