Toputure Indoor Exercise Bike SPB002 User Manual

1. Important Safety Information

Please read this entire manual before assembling and using the Toputure SPB002 Indoor Exercise Bike. Keep this manual for future reference. Failure to follow these instructions could result in injury or damage to the product.

• Consult your physician before starting any exercise program.
• This exercise bike is designed for home use only.
• Ensure all bolts and nuts are securely tightened before each use.
• Place the exercise bike on a flat, stable surface with adequate clearance around it.
• Keep children and pets away from the equipment during use.
• Wear appropriate exercise clothing and footwear. Avoid loose clothing that could get caught in moving parts.
• The maximum user weight capacity is 150 kg (330 lbs). Do not exceed this limit.
• Stop exercising immediately if you feel faint, dizzy, or experience pain.
• Regularly inspect the equipment for wear and tear. Do not use if damaged.

2. Package Contents

Carefully unpack all components and verify that you have received all items listed below. If any parts are missing or damaged, please contact customer support.

• Main Frame (70% pre-assembled)
• Front and Rear Stabilizers
• Handlebar Post and Handlebar
• Seat Post and Seat
• Pedals (Left and Right)
• LCD Monitor
• Water Bottle Holder
• Hardware Kit (bolts, washers, nuts, tools)
• User Manual

Figure 2.1: Main components of the Toputure SPB002 Indoor Exercise Bike.

3. Assembly Instructions

The Toputure SPB002 Exercise Bike comes 70% pre-assembled. The included tool kit and online video tutorials will guide you through the remaining steps, which typically take about 30 minutes.

1. Attach Stabilizers: Secure the front and rear stabilizers to the main frame using the provided bolts and washers. Ensure they are firmly attached for stability.
2. Install Seat Post and Seat: Insert the seat post into the main frame and adjust to your desired height. Attach the seat to the seat post and tighten securely.
3. Install Handlebar Post and Handlebar: Insert the handlebar post into the main frame. Attach the handlebar to the post and secure it.
4. Attach Pedals: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Ensure they are fully tightened to prevent loosening during use.
5. Mount LCD Monitor: Connect the sensor wires from the main frame to the back of the LCD monitor. Mount the monitor onto the handlebar post.
6. Install Water Bottle Holder: Attach the water bottle holder to the designated area on the frame using the provided screws.

For visual guidance, please refer to the online assembly video tutorials provided by Toputure.

4. Product Overview and Features

The Toputure SPB002 Indoor Exercise Bike is designed for effective and comfortable home workouts. Key features include:

• Smart Bluetooth Connectivity: Compatible with Z-sport, Zwift, and Kinomap applications for interactive virtual training.
• Magnetic Resistance System: Features a 15kg flywheel and wire-controlled magnetic resistance for smooth, quiet, and precise adjustments.
• Ultra-Quiet Operation: Belt-drive system ensures a silent workout experience (approx. 25dB).
• Robust Construction: Heavy-duty steel frame with a stable triangular structure supports users up to 150 kg.
• Adjustable Ergonomics: 2-way adjustable handlebars and 4-way adjustable padded seat accommodate users from 150 cm to 190 cm.
• Emergency Brake: A push-down emergency brake button provides immediate stopping power for safety.
• Multifunction LCD Monitor: Tracks time, speed, distance, calories, and odometer readings.
• Portability: Integrated transportation wheels for easy relocation.

Figure 4.1: Key components of the Toputure SPB002 Exercise Bike.

Figure 4.2: Robust construction for stability and durability.

5. Setup and Adjustments

5.1 Adjusting Seat Position

The seat can be adjusted both vertically and horizontally to ensure a comfortable and efficient riding posture.

• Vertical Adjustment: Loosen the knob on the vertical seat post. Slide the seat post up or down until your leg has a slight bend at the knee when the pedal is at its lowest point. Tighten the knob securely.
• Horizontal Adjustment: Loosen the knob beneath the seat. Slide the seat forward or backward to align your knee with the pedal axle when the pedals are horizontal. Tighten the knob securely.

5.2 Adjusting Handlebar Position

The handlebar can be adjusted vertically to suit your height and riding preference.

• Loosen the knob on the handlebar post. Raise or lower the handlebar to a comfortable height. Ensure your back is straight and your arms have a slight bend. Tighten the knob securely.

Figure 5.1: Adjustable seat and handlebar positions.

5.3 Adjusting Resistance

The Toputure SPB002 features 100 micro-adjustable magnetic resistance levels, controlled by a knob.

• Increase Resistance: Turn the resistance knob clockwise.
• Decrease Resistance: Turn the resistance knob counter-clockwise.
• Emergency Stop: Press down firmly on the resistance knob to engage the emergency brake and stop the flywheel immediately.

Figure 5.2: Resistance adjustment knob and levels.

6. Operating Instructions

6.1 Using the LCD Monitor

The LCD monitor displays your workout data in real-time. It typically powers on automatically when you start pedaling or press a button.

• SCAN: Automatically cycles through all display functions every few seconds.
• TIME: Displays the duration of your current workout.
• SPD (Speed): Shows your current cycling speed.
• DST (Distance): Displays the distance covered during your current workout.
• CAL (Calories): Estimates the calories burned during your workout.
• ODOMETER: Displays the total accumulated distance.

Figure 6.1: LCD Monitor and its functions.

6.2 Connecting to Fitness Applications (Bluetooth)

The Toputure SPB002 is compatible with popular fitness apps like Z-sport, Zwift, and Kinomap via Bluetooth, enhancing your training experience.

1. Ensure Bluetooth is enabled on your smartphone or tablet.
2. Download and install your preferred fitness application (Z-sport, Zwift, or Kinomap) from your device's app store.
3. Open the application and follow its instructions to search for and connect to your Toputure SPB002 Exercise Bike. The bike should appear as a discoverable Bluetooth device.
4. Once connected, the application will display your workout data and allow you to participate in virtual rides and challenges.

Figure 6.2: Bluetooth connectivity with fitness applications.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your exercise bike.

• Cleaning: Wipe down the bike with a damp cloth after each use to remove sweat and dust. Avoid abrasive cleaners.
• Inspection: Periodically check all bolts, nuts, and moving parts for tightness and wear. Tighten any loose fasteners.
• Belt Drive System: The belt drive system is designed for low maintenance and does not require lubrication or frequent replacement like traditional chain drives.
• Storage: Store the bike in a dry, cool place away from direct sunlight and extreme temperatures.

Figure 7.1: The silent belt drive system requires minimal maintenance.

8. Troubleshooting

If you encounter issues with your Toputure SPB002 Exercise Bike, refer to the following common solutions:

If these solutions do not resolve the issue, please contact Toputure customer support for assistance.

9. Specifications

10. Warranty and Support

The Toputure SPB002 Indoor Exercise Bike comes with a comprehensive warranty and dedicated customer support.

• 24-Month Warranty: Your exercise bike is covered by a 24-month warranty from the date of purchase, covering manufacturing defects.
• Free Spare Parts: During the warranty period, free spare parts will be provided for any covered issues.
• Lifetime Technical Support: Toputure offers lifetime technical support for your product.
• Contact Support: For any questions, issues, or warranty claims, please contact Toputure customer service. Refer to your purchase documentation for contact details.