Dreamflame 60-inch Electric Fireplace User Manual

Important Safety Instructions

Please read and understand all instructions before attempting to assemble, operate, or install this electric fireplace. Failure to do so could result in fire, electric shock, or serious personal injury.

• Read all instructions before using this appliance.
• This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• All electrical heaters have hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This fireplace is for indoor use only.
• Ensure proper ventilation and do not cover the front air outlet.
• Keep children and pets away from the appliance during operation.

Product Overview

The Dreamflame Electric Fireplace offers both recessed and wall-mounted installation options, providing adjustable flame and light colors, and two heating settings.

Key Features

• Realistic Flame Effects: Features realistic logs and crystal clear cube ember beds, with 3 flame colors and 3 top light colors for customizable ambiance.
• Dual Heating Options: Provides 750W and 1500W heating settings, capable of heating rooms up to 400 sq. ft.
• Adjustable Thermostat: Temperature range from 71°F to 99°F.
• Timer Function: Allows setting operation time from 0 to 9 hours.
• Control Methods: Operable via a hidden touchscreen panel and a remote control.
• Safety Features: Built-in overheating protection.
• Installation Versatility: Designed for both recessed and wall-mounted setups.

Components

• Electric Fireplace Unit
• Remote Control
• Mounting Bracket
• Decorative Media (Logs and Crystals)
• User Manual

Specifications

Setup and Installation

The Dreamflame Electric Fireplace can be installed in two primary ways: wall-mounted or recessed. Always ensure the power is disconnected before beginning installation.

Wall-Mounted Installation

1. Choose Location: Select a suitable wall location, ensuring it is away from combustible materials and has access to a power outlet.
2. Attach Mounting Bracket: Secure the provided mounting bracket to the wall using appropriate hardware (ST4*8 screws) for your wall type. Ensure it is level and at the desired height.
3. Hang Fireplace Unit: Carefully lift the fireplace unit and hook it onto the wall bracket.
4. Secure Unit: Once hung, secure the bottom of the fireplace to the wall using additional screws if necessary, as indicated in the diagram.
5. Install Decorative Media: Place the chosen decorative media (logs or crystals) into the ember bed.

Recessed Installation

1. Prepare Opening: Create a wall opening with dimensions slightly larger than the insert part of the fireplace (refer to specifications for exact insert dimensions: 58.8" W x 16.9" H x 5.5" D). Ensure there is enough space for the plug-in cable and air vent.
2. Attach Mounting Bracket: Secure the wall mount bracket to the inside of the prepared opening using ST4*8 screws.
3. Insert Fireplace Unit: Carefully slide the fireplace unit into the prepared opening.
4. Secure Unit: Fasten the fireplace to the wall studs or framing using the provided screws.
5. Install Decorative Media: Place the chosen decorative media (logs or crystals) into the ember bed.
6. Install Trim (Optional): If applicable, install any decorative trim around the fireplace for a finished look.

Note: Always refer to the detailed diagrams in the printed manual for precise measurements and screw placements.

Operating Instructions

Your Dreamflame Electric Fireplace can be operated using either the touch screen control panel on the unit or the included remote control.

Touch Screen Control Panel

The control panel is located on the unit and features several buttons for various functions:

• Power Button: Turns the fireplace ON/OFF.
• Flame Color Button: Cycles through available flame colors.
• Top Light Color Button: Cycles through available top light colors.
• Heater Button: Toggles between 750W, 1500W, and OFF.
• Thermostat Button: Adjusts the desired temperature.
• Timer Button: Sets the automatic shut-off timer (0-9 hours).

Remote Control

The remote control provides convenient access to all functions from a distance. Ensure the remote has 2 AAA batteries installed.

• Power (On/Off): Turns the unit on or off.
• Flame: Cycles through 3 flame color options.
• Atmosphere Light: Cycles through 3 top light color options.
• Heater (750W/1500W): Selects low (750W) or high (1500W) heat, or turns heat off.
• Thermostat (62°F-82°F): Adjusts the target room temperature.
• Timer (0-9 Hour): Sets the automatic shut-off timer.

Flame and Light Customization

The fireplace offers various combinations of flame and top light colors to create different moods.

• Use the "Flame Color" button to change the primary flame color.
• Use the "Top Light Color" button to change the accent lighting above the flame.
• The ember bed media (logs and crystals) can also be combined for varied visual effects.

Heating Functions

• Select 750W for lower heat output or 1500W for higher heat output.
• The thermostat maintains the set temperature.
• The flame effect can be operated independently of the heat function, allowing for ambiance without heating.

Official Product Videos

Maintenance

Regular maintenance ensures the longevity and optimal performance of your electric fireplace. Always disconnect power before performing any maintenance.

• Cleaning:
  • Glass Panel: Wipe the glass panel with a soft, damp cloth. Do not use abrasive cleaners or spray cleaners directly onto the glass.
  • Exterior Surfaces: Clean exterior surfaces with a soft, damp cloth. Dry thoroughly.
  • Air Vents: Periodically vacuum or wipe the air intake and exhaust vents to prevent dust buildup, which can affect heating efficiency.
• Light Bulbs: The flame effect uses LED technology, which typically does not require replacement. If issues occur, consult troubleshooting or contact support.
• Storage: If storing the fireplace for an extended period, ensure it is clean, dry, and stored in a safe, protected location.

Troubleshooting

If you encounter issues with your Dreamflame Electric Fireplace, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Dreamflame customer support.

Warranty and Support

Dreamflame provides a 1-year quality warranty and Lifetime Support for this electric fireplace.

For any questions, technical assistance, or warranty claims, please contact Dreamflame customer service.

You can visit the official Dreamflame store on Amazon for more information and contact options: Dreamflame Store.