Introduction
This manual provides detailed instructions for the installation and maintenance of your GoveeLife Air Purifier Replacement Filters (Model H1124). These filters are designed for use with GoveeLife Air Purifier Models H7124 and H712C. Proper installation and regular maintenance ensure optimal performance of your air purifier.
Product Overview
The GoveeLife Air Purifier Replacement Filters (Model H1124) are multi-stage filtration units designed to capture various airborne particles and odors. Each pack contains two replacement filter sets.
Image: Two GoveeLife H1124 replacement filters shown with their packaging. These filters are compatible with GoveeLife Air Purifier models H7124 and H712C.
Compatibility
These replacement filters (Model H1124) are specifically designed for and compatible with the following GoveeLife Air Purifier models:
- GoveeLife Air Purifier H7124
- GoveeLife Air Purifier H712C
Setup and Installation
Follow these steps to correctly install the replacement filters in your GoveeLife Air Purifier:
-
1. Remove the Purifier's Cover: Use the open slot to carefully remove the air purifier's cover.
Image: A hand demonstrates removing the air purifier's outer cover by utilizing the designated open slot.
-
2. Unpack the New Filter: Take the new True HEPA filter out of its plastic packaging. Important: Ensure all plastic wrapping is removed before installation.
Image: A hand is shown unwrapping a new air purifier filter from its protective plastic bag, with a warning label visible on the bag.
-
3. Insert the Filter and Replace Cover: Place the filter back into the purifier with the filter tabs facing out. Replace the back cover by lining up its feet with the matching slots on the housing and pushing the cover closed until it clicks securely.
Image: A hand guides the filter into the air purifier's compartment, followed by the reattachment of the back cover.
-
4. Start Using the Purifier: Once the filter is installed and the cover is secured, you can power on your GoveeLife air purifier.
Image: A finger presses the power button on the top control panel of the GoveeLife air purifier, indicating it's ready for operation.
After replacing the filter, it is recommended to reset the filter life indicator in the GoveeLife app or on the device's control panel, if available, to ensure accurate tracking of filter usage.
Maintenance
Regular maintenance of the pre-filter can extend the life of your main filter and maintain air purifier efficiency.
-
1. Detachable Pre-Filter Cleaning: The pre-filter is detachable and can be cleaned to remove accumulated dust and debris. You can use a vacuum cleaner with a brush attachment to clean the surface of the pre-filter.
Image: A vacuum cleaner attachment is used to clean dust from the surface of a detachable pre-filter, illustrating easy maintenance.
-
2. Washable Pre-Filter: The pre-filter is washable with water. Gently rinse the pre-filter under running water until clean. Ensure it is completely dry before reattaching it to the main filter and reinstalling it in the air purifier.
Image: Hands are shown rinsing the washable pre-filter under a kitchen faucet, demonstrating the water-washable feature.
It is recommended to replace the 3-stage filter at least every 6 months, or more frequently depending on air quality and usage. The GoveeLife app or your air purifier may provide notifications when a filter change is due.
Troubleshooting
- Air Purifier Not Turning On After Filter Replacement:
Ensure the back cover of the air purifier is securely closed. Some models have a safety switch that prevents operation if the cover is not properly latched.
- Filter Life Indicator Not Resetting:
Refer to your specific GoveeLife Air Purifier model's manual for instructions on how to manually reset the filter life indicator. This is often done via the control panel or the GoveeLife app.
- Reduced Airflow or Odor After Replacement:
Verify that all plastic packaging has been completely removed from the new filter. Check for any obstructions in the air intake or outlet vents. Ensure the filter is installed in the correct orientation.
Specifications
| Product Model | H1124 |
| Compatibility | GoveeLife Air Purifier H7124, H712C |
| Product Dimensions | 12.6 x 12.19 x 3.53 inches (32.0 x 30.96 x 8.97 cm) |
| Item Weight | 1.91 Pounds (0.87 kg) |
| Filter Type | 3-Stage Filtration (Pre-filter, True HEPA, Activated Carbon) |
| Recommended Replacement | Every 6 months (or as indicated by air purifier) |
Warranty and Support
For warranty information or technical support regarding your GoveeLife Air Purifier Replacement Filters or compatible air purifiers, please visit the official GoveeLife website or contact GoveeLife customer service. Keep your purchase receipt for warranty claims.
Official GoveeLife Store: GoveeLife Store on Amazon
