1. Product Overview
The onerbl AC/DC Adapter is a reliable and high-quality power supply designed to provide consistent and safe power to your compatible WORKPRO cordless tools. This adapter ensures your devices receive the correct voltage and current for optimal performance and battery charging.
Figure 1.1: The onerbl AC/DC Adapter, showing the main unit and the connected power cable with its DC output plug.
Figure 1.2: Front and side views of the adapter, highlighting its compact design and ventilation slots.
Figure 1.3: Detailed dimensions of the adapter (1.6 inch height, 2.6 inch length, 1.2 inch width) and the cable length (76 inches).
Figure 1.4: The adapter in a typical usage scenario, plugged into a power strip on a desk, demonstrating its compact footprint.
2. Key Features
- Wide Compatibility: Specifically designed for WORKPRO W121015A, W122044A, W122045A Cordless Drill Driver Kits and Electric Screwdrivers.
- Global Input Voltage: Supports AC 100-240V 50/60Hz automatic input, suitable for worldwide use.
- Stable Output: Provides a consistent 12V 1.5Ah (DC12V 1500mAh) output for efficient charging and operation.
- Advanced Safety Protections: Equipped with a smart chip for multiple layers of protection.
Figure 2.1: The adapter features a smart chip providing short-circuit, over-voltage, and over-current protection for enhanced safety.
- Durable Construction: Made with high-quality materials, including copper wire and a PVC jacket, for long-lasting performance.
Figure 2.2: Illustration of the adapter's quality control and durable design, highlighting the robust copper wire and PVC jacket of the cable.
- Extended Cord Design: Provides ample reach for convenient placement.
Figure 2.3: Examples demonstrating the utility of the extended cord design, allowing flexible placement of the adapter.
- Versatile Applications: Suitable for various 12V devices beyond the specified WORKPRO tools.
Figure 2.4: A visual representation of the wide range of applications for this power supply, including set-top boxes, routers, batteries, LED strips, and more.
3. Setup Instructions
Follow these steps to set up your onerbl AC/DC Adapter:
- Unpack the Adapter: Carefully remove the AC/DC adapter from its packaging. Inspect it for any visible damage.
- Verify Compatibility: Ensure your WORKPRO tool (W121015A, W122044A, W122045A) or other 12V device requires a 12V DC input with a compatible barrel connector.
- Connect to Device: Insert the DC output plug of the adapter firmly into the power input port of your WORKPRO tool or device.
- Plug into Power Outlet: Insert the AC input prongs of the adapter into a standard AC 100-240V wall outlet.
- Verify Power: Once connected, your device should indicate that it is receiving power or charging (e.g., a charging indicator light).
4. Operating Instructions
The onerbl AC/DC Adapter operates automatically once connected. It converts the incoming AC power to the stable DC power required by your device.
- Charging: When connected to a compatible WORKPRO tool, the adapter will supply power for charging its battery. Refer to your tool's manual for specific charging indicators and times.
- Direct Power: For devices that can operate directly from an external power source, the adapter will provide continuous power as long as it is plugged into an active outlet.
- Safety Features: The built-in protection mechanisms (over-voltage, over-heat, short-circuit, over-current) will automatically activate to protect both the adapter and your connected device in case of an electrical anomaly.
5. Maintenance
To ensure the longevity and optimal performance of your onerbl AC/DC Adapter, follow these maintenance guidelines:
- Keep Clean: Regularly wipe the adapter with a dry, soft cloth to remove dust and dirt. Do not use liquid cleaners.
- Avoid Extreme Conditions: Do not expose the adapter to excessive heat, cold, humidity, or direct sunlight.
- Handle Cables Carefully: Avoid bending or crimping the power cord excessively, especially near the connectors, to prevent internal wire damage.
- Store Properly: When not in use, unplug the adapter from both the wall outlet and the device. Store it in a cool, dry place.
- Inspect Periodically: Periodically check the adapter and its cables for any signs of wear, fraying, or damage. Discontinue use if damage is observed.
6. Troubleshooting
If you encounter issues with your onerbl AC/DC Adapter, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not receiving power/charging. | Adapter not plugged in correctly. Wall outlet is not active. Device power input port is faulty. Adapter or cable is damaged. | Ensure adapter is fully plugged into wall and device. Test wall outlet with another device. Try adapter with another compatible device. Inspect adapter and cable for damage; replace if necessary. |
| Adapter feels unusually hot. | Overload or poor ventilation. Internal fault. | Ensure adapter is not covered and has adequate airflow. Disconnect immediately and do not use if excessive heat persists. Contact support. |
| Device charges slowly or intermittently. | Loose connection. Incompatible device (wrong voltage/current). Cable damage. | Check all connections are secure. Verify device specifications match adapter output. Inspect cable for damage. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | onerbl |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage | DC 12V |
| Output Current | 1.5A (1500mAh) |
| Cable Length | Approx. 76 inches (6.3 feet) |
| Dimensions (L x W x H) | 2.6 x 1.2 x 1.6 inches (approximate) |
| Safety Features | Over Voltage Protection, Over Heat Protection, Short-Circuit Protection, Over-Current Protection |
8. Warranty Information
This onerbl AC/DC Adapter comes with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. The warranty typically covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For specific warranty duration and terms, please refer to the product packaging or contact onerbl customer support.
9. Customer Support
If you have any questions, concerns, or require technical assistance with your onerbl AC/DC Adapter, please contact our customer support team. When contacting support, please have your product model and purchase information ready.
Contact Information:
Please refer to the seller's contact information on your purchase platform or the product packaging for the most up-to-date support details.
