AIKE AK1337 Automatic Liquid Soap Dispenser User Manual

Introduction

Thank you for choosing the AIKE AK1337 Automatic Liquid Soap Dispenser. This device is designed to provide a hygienic and convenient way to dispense liquid soap, dishwashing detergent, or other compatible liquids. It features magnetic charging, 5-stage adjustable dispensing volume, IPX7 waterproofing, and a child lock function for enhanced safety and ease of use.

Image: The AIKE AK1337 Automatic Liquid Soap Dispenser, showcasing its sleek black design and transparent base.

Package Contents

Please verify that all items are present in the package:

• AIKE AK1337 Automatic Liquid Soap Dispenser (x1)
• Magnetic Charging Cable (x1)
• User Manual (x1)

Note: A USB power adapter is not included and must be supplied by the user. Please use a 5V output adapter for charging.

Important Safety Information

• Do not immerse the entire dispenser in water, despite its IPX7 rating. The IPX7 rating applies to the main body, but the charging port should be kept dry during charging.
• Avoid placing the dispenser in direct sunlight or near highly reflective surfaces like mirrors or polished metal, as this may interfere with the infrared sensor's operation.
• The sensor may not respond to very dark sponges or objects. Use lighter-colored sponges for optimal sensor detection.
• This dispenser is designed for liquid soaps and detergents only. It is not compatible with foam-type detergents.
• Do not use oily, acidic, or corrosive liquids in the dispenser.
• Ensure the charging cable is connected only to the designated magnetic port to prevent short circuits.

Setup

1. Filling the Dispenser

1. Twist the top section of the dispenser counter-clockwise to remove it from the liquid reservoir.
2. Pour your desired liquid soap or detergent into the wide opening of the reservoir. The maximum capacity is 420ml. Do not overfill.
3. Align the top section with the reservoir and twist clockwise to secure it.

Image: The wide opening of the dispenser for easy and mess-free refilling.

2. Initial Power On

1. Press and hold the power button on top of the dispenser for a few seconds.
2. The indicator light will flash once, indicating the dispenser is powered on and unlocked. It will enter setting mode.

Operating Instructions

1. Dispensing Liquid

Place your hand or a sponge under the dispenser nozzle. The infrared sensor will detect your presence and automatically dispense a pre-set amount of liquid. The sensing distance is approximately 3-7 cm.

2. Adjusting Dispense Volume (5 Stages)

The dispenser offers 5 adjustable liquid volume settings. The initial setting is typically stage 2.

• Lightly touch the power button to cycle through the dispense volume stages.
• Each touch will increase the dispense volume by one stage.
• The indicator light will flash to show the current stage:
• Stage 1: 1 flash
• Stage 2: 2 flashes
• Stage 3: 3 flashes
• Stage 4: 4 flashes
• Stage 5: 5 flashes
• Once it reaches stage 5, the next touch will cycle back to stage 1.

Image: Visual representation of the 5-stage liquid volume adjustment.

3. Child Lock Function

The child lock mode prevents unintended operation, especially by children, and avoids accidental dispensing.

• If no operation is performed for 1 minute, the indicator light will turn off, and the dispenser will enter child lock mode. In this mode, settings cannot be changed, but soap can still be dispensed.
• To unlock: Press and hold the power button. The indicator light will illuminate, indicating the child lock is disengaged. You can now adjust settings or turn off the power.

Image: Illustration of the child lock feature on the dispenser.

4. Power Off

While the dispenser is unlocked, press and hold the power button again. The indicator light will flash orange once and then turn off, indicating the dispenser is powered off.

Charging

The AIKE AK1337 features a built-in 2000mAh rechargeable lithium-ion battery, providing approximately 3 months of use on a full charge.

1. Low Battery Indication

When the battery level is low, the indicator light will flash orange. Please charge the dispenser promptly.

2. Charging Process

1. Connect the magnetic charging cable to the charging port on the dispenser. Ensure a secure connection.
2. Connect the USB end of the cable to a 5V USB power adapter (not included).
3. During charging, the indicator light will remain orange.
4. When fully charged (approximately 7-8 hours), the indicator light will turn white.

Image: Diagram illustrating the magnetic charging cable connection.

Maintenance

1. Cleaning

The dispenser's 304 stainless steel and ABS construction, along with its IPX7 waterproof rating, makes it easy to clean.

• Wipe the exterior with a damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Do not rinse the dispenser directly under running water or submerge it completely, especially the top section where the electronics are located.
• The transparent window at the bottom allows for easy monitoring of the liquid level.

Image: The dispenser demonstrating its IPX7 waterproof capability, suitable for wet environments.

2. General Care

• Ensure the non-slip pad on the bottom is clean and intact for stability.
• Regularly check the liquid level through the transparent window to avoid running out unexpectedly.

Troubleshooting

Specifications

Warranty and Support

AIKE provides a 1-year warranty service for this product. For detailed warranty conditions, please refer to the product page or contact the seller directly.

If you have any questions or encounter issues with your AIKE AK1337 Automatic Liquid Soap Dispenser, please do not hesitate to contact our customer support. We are committed to providing assistance.