Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.
Redragon K670 RGB Mechanical Gaming Keyboard
User Manual
1. Setup
1.1 Package Contents
Verify that all items are present in the package:
Redragon K670 RGB Mechanical Gaming Keyboard
USB Cable
User Manual
1.2 Connection
To connect your Redragon K670 keyboard:
Locate the USB cable included with your keyboard.
Plug one end of the USB cable into the port on the keyboard.
Connect the other end of the USB cable to an available USB port on your computer.
The keyboard will automatically install necessary drivers. Allow a few moments for the installation to complete.
Image: The Redragon K670 keyboard connected to a computer via its USB cable.
2. Operating Instructions
2.1 RGB Backlight Modes
The Redragon K670 features multiple RGB backlight modes. You can cycle through these modes and adjust settings directly from the keyboard.
Changing Modes: Press Fn + Ins to cycle through 18 preset backlighting modes.
Adjusting Brightness: Press Fn + Up Arrow to increase brightness and Fn + Down Arrow to decrease brightness.
Adjusting Speed: Press Fn + Left Arrow to slow down the lighting effect speed and Fn + Right Arrow to speed it up.
Image: The Redragon K670 keyboard displaying various RGB lighting effects.
2.2 Dedicated Multimedia Controls
The keyboard includes dedicated multimedia keys for convenient control of audio and media playback.
Use the dedicated keys (F1-F12 with Fn key) to control functions such as play, pause, skip tracks, and volume adjustment.
Image: The Redragon K670 keyboard highlighting the multimedia function keys.
2.3 Software Customization
For advanced customization, including creating custom lighting modes and macros, download the professional software from the official Redragon website.
The software allows for detailed control over RGB effects, macro programming, and key remapping.
Image: Screenshot of the Redragon K670 keyboard's customization software interface.
3. Maintenance
3.1 Cleaning
Regular cleaning helps maintain the keyboard's performance and appearance.
Disconnect the keyboard from your computer before cleaning.
Use a soft, lint-free cloth dampened with a small amount of water or a mild cleaning solution to wipe down the keycaps and frame.
For deeper cleaning, keycaps can be carefully removed using a keycap puller.
Avoid spraying liquids directly onto the keyboard.
3.2 Hot-Swappable Switches
The Redragon K670 features hot-swappable sockets, allowing you to change mechanical switches without soldering.
Use the included switch puller tool to carefully remove existing switches.
Align the pins of the new 3-pin or 5-pin compatible switch with the holes on the PCB.
Gently press the new switch into place until it clicks securely. Ensure pins are not bent during insertion.
Image: A close-up view of the hot-swappable sockets on the Redragon K670 keyboard with switches removed.
Image: A detailed view of a linear red mechanical switch, typical for the K670 model.
4. Troubleshooting
4.1 Keyboard Not Responding
Ensure the USB cable is securely connected to both the keyboard and the computer.
Try plugging the keyboard into a different USB port on your computer.
Test the keyboard on another computer to determine if the issue is with the keyboard or the computer.
Restart your computer.
4.2 Backlight Issues
If backlighting is off, press Fn + Ins to cycle through modes or Fn + Up Arrow to increase brightness.
Ensure the keyboard software (if installed) is not overriding the onboard lighting controls.
Perform a factory reset if available (refer to advanced software settings or Redragon support).
4.3 Keys Not Registering
Check if the affected keys have properly seated switches. If not, gently re-seat or replace the switch using the hot-swap feature.
Clean around the affected keycaps to remove any debris that might be obstructing the switch.
5. Specifications
Feature
Detail
Model Number
K670
Keyboard Description
Gaming
Connectivity Technology
USB
Compatible Devices
PC, Laptop
Special Feature
Hot-Swappable
Switch Type
Quiet Linear Red Switches
Color
Black
Material
Plastic
Item Weight
1.91 pounds
Package Dimensions
17.76 x 6.38 x 1.81 inches
6. Warranty and Support
6.1 Warranty Information
Redragon products typically come with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official Redragon website for detailed warranty terms and conditions.
6.2 Customer Support
For technical assistance, product inquiries, or support, please contact Redragon customer service through their official website or the contact information provided in your product documentation.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.