Yaheetech Full Upholstered Platform Bed Instruction Manual

1. Introduction

Thank you for choosing the Yaheetech Full Upholstered Platform Bed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: Yaheetech Full Upholstered Platform Bed (Beige)

2. Safety Information

• Do not exceed a weight limit of 800 lbs.
• Be cautious of sharp edges and metal components during assembly and use.
• Keep young children and pets away from the bed frame to prevent entrapment.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners.
• Assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.

3. Package Contents

Before assembly, verify that all components are present and undamaged. The package should include:

• Headboard (Upholstered)
• Side Rails (Upholstered)
• Wooden Slats (12 pieces, connected by fabric strap)
• Support Legs (with protective foot pads)
• Hardware Pack (bolts, screws, Allen wrench)
• Installation Manual (this document)

4. Specifications

Figure 2: Product Dimensions and Weight Capacity

5. Assembly Instructions

Assembly typically requires two adults. Lay out all components on a soft, clean surface to prevent scratches. Follow the numbered steps below:

Step 1: Attach Headboard Legs

Secure the support legs to the headboard using the provided hardware. Ensure they are firmly attached.

Figure 3: Detail of Headboard and Support Legs

Step 2: Assemble Side Rails

Connect the upholstered side rails to the headboard and footboard (if separate) using the designated brackets and bolts. Ensure all connections are tight for stability.

Step 3: Install Wooden Slats

Unroll the connected wooden slats across the bed frame. The slats are securely connected by a fabric strap to ensure proper spacing and prevent movement. Fasten the slats to the side rails as indicated in the detailed diagrams provided in the physical manual.

Figure 4: Multi-Support Slatted Frame

Step 4: Final Tightening

Once all components are in place, re-check all bolts and screws to ensure they are fully tightened. This will ensure the bed frame is stable and noise-free.

6. Operating Instructions

This platform bed is designed to be used without a box spring. Simply place your mattress (latex, foam, or spring) directly onto the wooden slats.

• Ensure the mattress is centered and fully supported by the slats.
• The bed features 6 inches of under-bed space, allowing for easy cleaning with a vacuum robot or for storage.

Figure 5: Under-Bed Space for Cleaning

7. Maintenance

• Fabric Care: The linen upholstered fabric should be dry cleaned only. For minor spills, gently blot with a clean, damp cloth. Avoid harsh chemicals.
• Frame Care: Periodically check all fasteners and re-tighten if necessary to maintain stability and prevent noise.
• Cleaning: The 6-inch under-bed clearance allows for easy cleaning underneath the bed.

Figure 6: Soft Linen Fabric Detail

8. Troubleshooting

• Squeaking Noises: If the bed frame produces squeaking noises, re-tighten all assembly bolts and screws. Ensure the mattress is properly seated on the slats.
• Instability/Wobbling: Check that all connections are secure and that the support legs are firmly in place. Ensure the bed is on a level surface.
• Missing Parts: If any parts are missing upon arrival, please contact customer support immediately.

9. Warranty & Support

Yaheetech products are designed for quality and durability. For any questions, concerns, or support needs, please refer to the contact information provided at the point of purchase or visit the official Yaheetech store online. Your satisfaction is our priority.

This product is eligible for 30-day easy returns. Customer support is available for assistance.