1. Introduction
This manual provides essential information for the safe and efficient operation of your Hover-1 Blast Electric Self Balancing Scooter. Please read all instructions carefully before use to ensure proper function and to prevent injury or damage.
Image 1.1: The Hover-1 Blast Electric Self Balancing Scooter, shown in Aqua.
2. What's in the Box
Verify that all items are present in the packaging:
- Hover-1 Blast Electric Self Balancing Scooter
- Instruction Manual
- Wall Charger
3. Safety Information
WARNING: Riding an electric self-balancing scooter can be dangerous. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads. Read and understand all safety warnings and instructions before riding.
3.1 General Safety Guidelines
- The Hover-1 Blast is UL2272 certified, indicating it has been tested to applicable standards for electrical safety.
- Recommended age for riders is 5 years and up.
- Maximum rider weight is 160 pounds (72.5 kg). Do not exceed this limit.
- Always ride on safe surfaces. Avoid uneven terrain, steep inclines, and wet conditions.
- The scooter will alert you if you ride too fast or on unsafe surfaces. Heed these warnings and adjust your speed or riding environment accordingly.
- Do not operate the scooter under the influence of alcohol or drugs.
- Always be aware of your surroundings and other pedestrians or vehicles.
Image 3.1: Emphasizing safety with a child wearing protective gear and highlighting UL certification.
4. Product Overview
The Hover-1 Blast is designed for ease of use and stability, making it suitable for beginners. It features a dynamic stabilization system to assist with balance.
4.1 Key Features
- Motors: Dual 160W motors, providing a total of 320W power.
- Tires: 6.5-inch solid wheels for a smooth ride.
- Speed: Maximum speed of 7 mph (11.2 km/h).
- Range: Up to 3 miles (4.8 km) on a single charge.
- Incline: Capable of scaling inclines up to 5 degrees.
- Foot Pads: Non-slip foot pads for secure footing.
- Lighting: Bright dual LED headlights and colorful LED wheel lights.
Image 4.1: Key performance specifications of the Hover-1 Blast.
Image 4.2: Visual representation of the Hover-1 Blast's features.
Image 4.3: Detail of the LED headlights and multi-color wheel lights.
5. Setup
5.1 Charging the Battery
- Locate the charging port on the side of the Hover-1 Blast, next to the power button.
- Connect the wall charger to the charging port.
- Plug the wall charger into a standard electrical outlet.
- The charger's indicator light will be red while charging and turn green when charging is complete.
- A full charge takes approximately 5 hours.
- Disconnect the charger once the battery is fully charged.
6. Operating Instructions
6.1 Powering On/Off
- To power on, press and hold the power button until the indicator lights illuminate.
- To power off, press and hold the power button until the indicator lights turn off.
6.2 Mounting and Dismounting
- Place the Hover-1 Blast on a flat, level surface.
- Step onto one foot pad with one foot, ensuring the scooter remains level.
- Quickly and confidently step onto the other foot pad with your second foot. Maintain a relaxed posture and use your core for balance.
- To dismount, step off one foot at a time, ensuring the scooter remains stable.
6.3 Riding and Steering
- Lean slightly forward to move forward.
- Lean slightly backward to slow down or move backward.
- To turn, apply gentle pressure with your left foot to turn right, and with your right foot to turn left.
- Practice in an open, safe area until you are comfortable with the controls.
7. Maintenance
7.1 Cleaning
- Wipe the scooter with a damp cloth after each use. Avoid using harsh chemicals or abrasive cleaners.
- Do not submerge the scooter in water or expose it to excessive moisture.
7.2 Storage
- Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% every 3 months to prolong battery life.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Power button not pressed correctly | Charge the battery; Press and hold the power button firmly. |
| Scooter is beeping or vibrating excessively | Riding too fast; Uneven surface; Overload | Reduce speed; Move to a smoother surface; Check rider weight. |
| Short battery life | Battery not fully charged; Old battery; Extreme temperatures | Ensure full 5-hour charge; Contact support for battery replacement; Store in moderate temperatures. |
| Lights not working | Electrical issue | Contact customer support. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Blast |
| Item Model Number | DSA-BLST-AQA |
| Brand | Hover-1 |
| Max Speed | 7 mph |
| Max Range | 3 miles |
| Motor Power | Dual 160W (320W total) |
| Tire Size | 6.5 inches |
| Battery Type | 36V/2Ah Lithium-Ion |
| Charge Time | Approximately 5 hours |
| Max Weight Capacity | 160 lbs |
| Item Weight | 13.23 lbs |
| Dimensions (Package) | 24.9 x 9.6 x 9.25 inches |
| Safety Certification | UL2272 |
| Recommended Age | 5 years and up |
10. Warranty & Support
For warranty information, product support, or to purchase replacement parts, please visit the official Hover-1 website or contact their customer service department.
Online Support: www.hover-1.com/support
Manufacturer: DGL Group
