Beldray BEL01843VDE Airapid Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for purchasing the Beldray BEL01843VDE Airapid Cordless Vacuum Cleaner. This appliance is designed for efficient cleaning of your home, offering versatility with its cordless design and ability to convert into a handheld unit. It features a 22.2V lithium-ion battery providing up to 35 minutes of cleaning time, two speed settings, a 0.5-liter dust container, and a washable HEPA filter. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

2. Safety Instructions

Please read and understand all safety instructions before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the appliance is switched off and unplugged from the mains before cleaning or performing any maintenance.
• This appliance is intended for domestic use only. Do not use it for commercial or industrial purposes.
• Do not immerse the main unit, charger, or battery in water or any other liquid.
• Keep the appliance away from heat sources, direct sunlight, and sharp edges.
• Do not pick up liquids, hot ashes, lit cigarettes, sharp objects, or flammable/combustible materials with the vacuum cleaner.
• Ensure the dust container and filter are correctly installed before use.
• Only use the charger supplied with the appliance. Using an incorrect charger may damage the battery and void your warranty.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when the appliance is used near children.
• Regularly check the power cord and plug for damage. If damaged, do not use the appliance.

3. Product Components

Familiarize yourself with the parts of your Beldray Airapid Cordless Vacuum Cleaner.

• Main Unit: Contains the motor, dust container, and handle with controls.
• Extension Tube: Connects the main unit to the floor brush for stick vacuum mode.
• Motorised LED Floor Brush: For cleaning various floor types, equipped with LED headlights.
• 2-in-1 Crevice & Brush Tool: For detailed cleaning in tight spaces and on upholstery.
• Wall Mount: For convenient storage and charging.
• Charger: Power adapter for recharging the battery.
• Spare HEPA Filter: An additional washable filter for extended use.

Image 3.1: Overview of the Beldray Airapid Cordless Vacuum Cleaner, highlighting its main components and key features such as the multicylonic system, LED headlights, handheld unit conversion, 2-in-1 crevice tool, wall-mounted storage, and 500 ml easy-to-empty dust container.

4. Setup

4.1. Assembly

1. Insert the extension tube into the main unit until it clicks securely into place.
2. Attach the motorised LED floor brush to the other end of the extension tube, ensuring it clicks firmly.
3. For handheld use, detach the extension tube and directly attach the 2-in-1 crevice & brush tool to the main unit.

4.2. Initial Charging

Before first use, fully charge the vacuum cleaner for approximately 25-35 minutes.

1. Connect the charger to the charging port on the main unit.
2. Plug the charger into a suitable wall socket. The charging indicator lights will illuminate.
3. Once fully charged, the indicator lights will change or turn off (refer to your specific model's LED behavior). Unplug the charger.

Image 4.1: A hand plugging the charging cable into the main unit of the Beldray Airapid Cordless Vacuum Cleaner, indicating the charging process.

4.3. Wall Mount Installation

The included wall mount allows for convenient storage and charging.

1. Choose a suitable location near a power outlet, ensuring it is at an appropriate height for easy access.
2. Mark the drilling points on the wall using the wall mount as a template.
3. Drill holes and insert wall plugs (if necessary for your wall type).
4. Secure the wall mount to the wall using the provided screws.
5. Hang the vacuum cleaner on the wall mount for storage and charging.

5. Operating Instructions

5.1. Power On/Off and Speed Settings

• Press the power button on the handle to turn the vacuum cleaner on.
• Press the speed selection button to switch between the two available suction power settings (low and high).
• Press the power button again to turn the vacuum cleaner off.

5.2. Using as a Stick Vacuum

For cleaning floors, carpets, and under furniture.

• Ensure the extension tube and motorised floor brush are securely attached.
• Turn on the vacuum cleaner and select the desired speed.
• Guide the floor brush over the surface to be cleaned. The LED headlights will illuminate the cleaning path.

Image 5.1: A person using the Beldray Airapid Cordless Vacuum Cleaner in stick mode on a hard floor, demonstrating its maneuverability.

Image 5.2: The vacuum cleaner being used on a carpeted floor, showcasing its effectiveness on different surfaces.

Image 5.3: The vacuum cleaner head reaching under a sofa, illustrating its low-profile design for cleaning hard-to-reach areas.

5.3. Using as a Handheld Vacuum

Ideal for cleaning upholstery, car interiors, stairs, and tight corners.

• Detach the extension tube from the main unit.
• Attach the 2-in-1 crevice & brush tool directly to the main unit.
• Turn on the vacuum cleaner and use the appropriate end of the tool for the task (crevice for narrow gaps, brush for dusting).

Image 5.4: A person using the Beldray Airapid as a handheld vacuum with the crevice tool to clean crumbs from a sofa, demonstrating its versatility for detailed cleaning.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.

6.1. Emptying the Dust Container

Empty the 0.5-liter dust container regularly, especially when it reaches the MAX fill line.

1. Ensure the vacuum cleaner is switched off.
2. Press the dust container release button to detach it from the main unit.
3. Hold the dust container over a waste bin and open the bottom flap to empty the contents.
4. Close the flap and reattach the dust container to the main unit until it clicks.

Image 6.1: Hands holding the main unit of the vacuum cleaner over a trash can, demonstrating how to open the dust container and empty collected debris.

6.2. Cleaning the HEPA Filter

The HEPA filter is washable and should be cleaned regularly to maintain suction power. A spare filter is included.

1. With the dust container removed, carefully pull out the HEPA filter.
2. Tap the filter gently to remove loose dust.
3. Rinse the filter under cold running water until the water runs clear. Do not use detergents.
4. Allow the filter to air dry completely for at least 24 hours before reinserting it. Do not use a hairdryer or other heating devices.
5. Ensure the filter is completely dry before placing it back into the dust container and reattaching it to the main unit.

6.3. Cleaning the Motorised Floor Brush

1. Ensure the vacuum cleaner is switched off and disconnected from the extension tube.
2. Locate the release mechanism for the brush roll on the side of the floor brush.
3. Remove the brush roll and clear any tangled hair, threads, or debris.
4. Reinsert the brush roll and secure it in place.

6.4. General Cleaning

Wipe the exterior of the vacuum cleaner with a soft, damp cloth. Do not use abrasive cleaners or solvents.

7. Troubleshooting

If you encounter issues with your vacuum cleaner, refer to the following table for common problems and solutions.

8. Specifications

9. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the packaging for details on coverage and duration. For technical support, spare parts, or service inquiries, please contact Beldray customer service via their official website or the contact details provided in your product documentation. Always have your model number (BEL01843VDE) and purchase date available when contacting support.