Product Overview
The Polaris Quattro P40 is a pressure-side pool cleaner designed for all in-ground pool surfaces. It effectively cleans floors, walls, and the waterline. This cleaner is powered by a booster pump and features an extra-large debris intake and a dual-stage filtration canister for efficient debris collection.
- Versatile Cleaning: Suitable for all in-ground pool surfaces, from floor to waterline.
- Powerful Suction: Equipped with three powerful venturi jet vacuums and an extra-large debris intake to collect large debris like acorns, leaves, and pebbles.
- Dual Filtration: Features a large-capacity dual-filtration canister that captures both large debris and fine particles.
- Transparent Lid: A transparent window allows for easy monitoring of debris levels in the canister.
- Active Scrubbing: Scrubbing brushes actively clean the pool surfaces as the unit navigates.
Setup Instructions
Follow these steps to properly set up your Polaris Quattro P40 pool cleaner:
- Connect to Pressure Line: Connect the pool cleaner to a dedicated pressure line in your pool system.
- Booster Pump Check: Ensure your booster pump is correctly installed and fully functional. The Polaris Quattro P40 requires a booster pump for operation.
- Attach Hose: Place the cleaner in the pool and securely attach the 31 ft feed hose to the unit and the pressure line.
- Initial Operation: Turn on the booster pump and observe the cleaner to confirm it is operating as expected.
Image: Polaris Quattro P40 connected to its hose, ready for deployment in the pool.
Operating Instructions
Once set up, the Polaris Quattro P40 operates automatically to clean your pool. Monitor its performance to ensure optimal cleaning.
- Automatic Navigation: The cleaner will navigate the pool independently, sweeping, scrubbing, and vacuuming debris from the floor to the waterline.
- Water Circulation: While cleaning, the Quattro P40 circulates clean, filtered water throughout the entire pool.
- Debris Collection: Debris is collected in the large-capacity dual-filtration canister. The transparent lid allows you to see when the canister is full.
Image: The Polaris Quattro P40 showcasing its 4WD superior wall climbing ability.
Maintenance
Regular maintenance ensures the longevity and efficiency of your Polaris Quattro P40.
- Canister Cleaning: Regularly clean the dual-stage filtration canister. The transparent lid indicates when it's full. Simply remove the canister and rinse it thoroughly to discard collected debris.
- Brush Inspection: Periodically inspect the scrubbing brushes for wear and tear. Replace them if they appear damaged or ineffective.
- Hose Check: Ensure the 31 ft feed hose is free from kinks or damage that could impede water flow or cleaner movement.
Image: The easy-clean debris canister of the Polaris Quattro P40, highlighting its dual filtration and triple venturi jets.
Troubleshooting
If your Polaris Quattro P40 is not performing as expected, consider the following:
- No Movement/Poor Suction:
- Check that the booster pump is running and providing adequate pressure.
- Inspect the feed hose for any blockages, kinks, or leaks.
- Ensure the filtration canister is not full and is properly seated.
- Verify that the debris intake is clear of large obstructions.
- Incomplete Coverage:
- Check for proper hose length; too much or too little hose can affect coverage.
- Ensure the pool water chemistry is balanced, as this can sometimes affect cleaner performance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Polaris |
| Model Name | Quattro P40 |
| Item Model Number | F40 |
| Power Source | AC (via booster pump) |
| Item Weight | 26 Pounds |
| Hose Length | 31 Feet |
| Material | Plastic |
| Color | White |
| Product Dimensions | 20.3"L x 19.8"W x 13.1"H |
| Installation Type | Requires existing pressure line |
| Control Method | Touch |
| Assembly Required | No |
Warranty and Support
The Polaris Quattro P40 comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your product or contact Polaris customer service.
For technical support, you may call 1-800-822-7933 (as indicated on some product images/controls).
Product Videos
Video: Official Polaris P40 Pool Cleaner overview, demonstrating its features and operation.
Additional Product Views
Side view of the Polaris Quattro P40.
Top view showing the transparent lid and dual filtration canister.
Underside view with extra-large debris intake and scrubbing brushes.
Recommended Polaris PB4-60 Booster Pump for peak performance.
Transparent lid for easy viewing of collected debris.
Scrubbing brushes for effective cleaning of pool surfaces.
