Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Platform King Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Ensure all components are present and undamaged before proceeding.
Safety Information
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners.
- Do not exceed the maximum weight capacity of 838 lbs.
- Keep small parts away from children during assembly.
- Two people are recommended for assembly to ensure safety and ease of installation.
Package Contents
Verify that all parts listed in your product's packing list are present. Typically, the package includes:
- Headboard and Footboard components
- Side rails and center support rails
- Metal slats
- Supporting legs (14 total)
- Hardware components (bolts, nuts, washers, L-shaped plates)
- Assembly tools (e.g., Allen wrench)
Setup (Assembly Instructions)
Follow these steps to assemble your Yaheetech King Metal Platform Bed Frame. All necessary hardware and tools are provided.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided parts list.
- Assemble Headboard and Footboard: Connect the horizontal bars to the vertical posts of the headboard and footboard using the designated bolts and L-shaped plates. Ensure all connections are firm.
- Attach Side Rails: Connect the side rails to the assembled headboard and footboard using the appropriate hardware. Do not fully tighten bolts until the entire frame is assembled.
- Install Center Support Rails and Legs: Attach the center support rails to the frame. Secure the 14 supporting legs to the frame, ensuring they are evenly distributed for optimal support.
- Install Metal Slats: Insert the metal slats into the designated notches on the side rails. Ensure each iron pipe is aimed at its notch and pressed firmly into place to secure it. This built-in design prevents mattress sliding.
Image: Assembly step showing how to aim the iron pipe at the notch and press hard to fix the metal slats into the frame.
Image: Illustration of L-shaped plates used for fastening components, ensuring a stable structure during assembly.
Image: Composite image highlighting key features including sleek industrial style, premium metal tubes, ample under-bed storage, and protective rubber caps on legs.
Operating Instructions
Mattress Placement
This platform bed frame is designed to be used without a box spring. Simply place your King size mattress directly onto the metal slats. The built-in slat design helps prevent the mattress from sliding.
Image: Illustration demonstrating how the built-in slats effectively prevent the mattress from sliding on the bed frame.
Weight Capacity
The bed frame has a maximum load-bearing capacity of 838 lbs. Ensure this limit is not exceeded to maintain structural integrity and safety.
Under-Bed Storage
The frame provides approximately 13 inches of ground clearance, offering ample space for under-bed storage. Utilize this area for storage boxes, baskets, or other items to keep your bedroom organized.
Image: Visual representation of the 13-inch ground clearance, showcasing the potential for utilizing the space beneath the bed for storage.
Maintenance
- Cleaning: Wipe the metal frame with a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners that may damage the powder-coated finish.
- Fastener Checks: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten any loose fasteners to maintain the bed frame's stability and prevent squeaking.
- Leg Caps: Verify that all rubber caps on the support legs are intact and properly seated to continue protecting your flooring.
Troubleshooting
Squeaking Noises
If your bed frame develops squeaking noises, it is typically due to loose connections. Carefully inspect all bolts and screws, especially those connecting the side rails and support legs, and tighten them securely. Ensure all metal slats are fully seated in their notches.
Instability or Wobbling
If the bed frame feels unstable, re-check all assembly steps. Ensure all L-shaped plates are correctly installed and all fasteners are fully tightened. Verify that the bed frame is placed on a level surface and that all support legs are making firm contact with the floor.
Specifications
Image: Detailed diagram showing the dimensions of the King size bed frame, including length, width, height, and under-bed clearance.
| Feature | Detail |
|---|---|
| Model Number | YT-613632WK |
| Standard Size | King |
| Material | Iron (Powder Coated) |
| Weight Capacity | 838 lbs |
| Applicable Mattress Size | 80" L × 76" W |
| Overall Dimensions (L x W x H) | 83" L x 79" W x 35" H |
| Ground Clearance | 13" |
| Color | White |
| Assembly Required | Yes |
| Special Features | No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Warranty Information
For specific warranty details regarding your Yaheetech Metal Platform King Bed Frame, please refer to the warranty card included with your purchase or visit the official Yaheetech website. Warranty terms and conditions may vary.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Yaheetech customer service. Contact information can typically be found on the product packaging or the official Yaheetech website.
