BOYA Wireless Lavalier Microphone User Manual

Model: BY-V10

1. Introduction

Thank you for choosing the BOYA BY-V10 Wireless Lavalier Microphone. This innovative microphone system is designed to provide high-quality audio for your video recording, live streaming, podcasting, and online conferencing needs. Its compact design, easy setup, and advanced features make it an excellent tool for content creators and professionals alike.

2. What's in the Box

BY-V10-TX Transmitter ×1
BY-V10-RX Receiver ×1
USB-C Charging Cable ×1
Foam Windscreen ×1

BOYA BY-V10 Wireless Lavalier Microphone components: one transmitter and one receiver. — Figure 1: BOYA BY-V10 Wireless Lavalier Microphone system, showing the transmitter with a foam windscreen and the USB-C receiver.

3. Setup Guide

3.1 Initial Charging

Before first use, ensure both the transmitter and receiver are fully charged. Connect the provided USB-C charging cable to the charging ports on both units and a power source. A full charge takes approximately two hours, providing up to 9 hours of operation time.

Image showing the BOYA BY-V10 transmitter and receiver with battery life indicators, highlighting 2H charging time, 95mAh battery capacity, and 9H usage time. — Figure 2: The BOYA BY-V10 offers a long battery life, with a 95mAh capacity providing up to 9 hours of usage after a 2-hour charge.

3.2 Automatic Connection

Plug the BY-V10-RX receiver directly into the USB-C port of your smartphone, tablet, or laptop.
Turn on the BY-V10-TX transmitter. The units will automatically pair within seconds.
Important Note: For Android devices, ensure the USB OTG (On-The-Go) setting is enabled in your device's settings for proper microphone recognition.

Image illustrating the wide compatibility of the BOYA BY-V10, showing it connected to various Type-C Android smartphones, laptops, and iOS devices including iPhone 15. — Figure 3: The BY-V10 is widely compatible with Type-C smartphone devices and iOS system devices, including the iPhone 15 series.

4. Operating Instructions

4.1 Microphone Placement

The BY-V10 transmitter can be handheld or clipped onto your shirt using its rotatable back clip. For optimal sound capture, position the microphone approximately 6-8 inches from your mouth.

4.2 Noise Cancellation

The microphone features advanced noise reduction technology. To activate or deactivate noise cancellation, press the dedicated NR (Noise Reduction) button on the transmitter. This feature helps to minimize background noise for clearer audio, especially in noisy environments.

Diagram showing the effect of one-click noise cancellation on the BOYA BY-V10, with a visual representation of sound waves before and after noise reduction, and the location of the NR button. — Figure 4: Enhance voice clarity with the one-click noise cancellation feature, activated by the NR button on the transmitter.

4.3 Omnidirectional Sound Pickup

Equipped with an omnidirectional pickup microphone, the BY-V10 captures 360-degree sound with precision. This ensures that no audio detail is missed, regardless of the surrounding environment or the direction of the sound source.

4.4 Wireless Transmission

The system operates on a 2.4G signal, providing stable and low-latency audio transmission. It supports a wireless range of up to 164 feet (50 meters) in open environments without obstacles or interference, allowing for flexible recording distances.

Image depicting the 164FT/50M long-range transmission capability of the BOYA BY-V10, showing a person recording from a distance on a beach with the microphone connected to a smartphone. — Figure 5: Experience reliable audio transmission up to 164 feet (50 meters) in open, unobstructed environments.

4.5 Simultaneous Charging

The receiver allows you to charge your device simultaneously while recording, ensuring uninterrupted long recording sessions for live streaming or course recording.

5. Maintenance

Keep the microphone and receiver clean and free from dust. Use a soft, dry cloth for cleaning.
Store the units in a cool, dry place away from direct sunlight and extreme temperatures.
Ensure the foam windscreen is securely attached to the transmitter to prevent loss and provide optimal wind noise reduction. Replacement windscreens can be acquired if needed.
Avoid dropping or subjecting the units to strong impacts.

6. Troubleshooting

Problem	Possible Cause	Solution
Microphone not connecting/pairing.	USB OTG not enabled (Android). Units not powered on. Low battery.	Enable USB OTG in your device settings. Ensure both transmitter and receiver are turned on. Charge both units fully.
Poor sound quality/excessive background noise.	Noise cancellation off. Microphone too far from source. Environmental interference.	Press the NR button to activate noise cancellation. Ensure microphone is within optimal range (6-8 inches). Move to a less noisy environment if possible.
Short battery life.	Incomplete charging. Frequent use of power-intensive features.	Ensure units are charged for the full 2 hours. Minimize continuous use of noise cancellation if not critical.

7. Specifications

Feature	Specification
Model Number	BY-V10
Microphone Form Factor	Lavalier
Polar Pattern	Omnidirectional
Connectivity Technology	Wireless 2.4GHz
Connector Type	USB Type-C
Compatible Devices	Smartphone, Laptop, Tablet
Audio Sensitivity	42 dB
Signal-to-Noise Ratio	78 dB
Frequency Range	20Hz-16kHz
Item Weight	5.3 ounces (150 Grams)
Product Dimensions	4.72 x 3.15 x 1.18 inches
Power Source	Battery Powered (3 Lithium Ion batteries required)

8. Warranty and Support

For detailed warranty information and further support, please refer to the official Instructions for Use (IFU) PDF document provided by BOYA.

Download Official User Guide (PDF)

	BOYA BOYAMIC 2.4GHz Wireless Microphone System User Manual Comprehensive user manual for the BOYA BOYAMIC 2.4GHz dual-channel wireless microphone system. Covers features, setup, operation, troubleshooting, and specifications for vlogging, live streaming, and mobile journalism.
	BOYA BY-DM2 Digital Lavalier Microphone for Android Devices - User Guide Learn how to use the BOYA BY-DM2 digital lavalier microphone with your Android devices. This guide covers setup, operation, specifications, and compatibility for high-quality audio recording.
	BOYA BY-M1 Universal Lavalier Microphone User Manual Comprehensive guide to the BOYA BY-M1 universal lavalier microphone, covering features, setup, usage with cameras and smartphones, troubleshooting, and specifications.
	BOYA BY-V Wireless Microphone System Q&A Comprehensive Q&A guide for the BOYA BY-V wireless microphone system, covering setup, connectivity, audio issues, and usage tips for various mobile devices.
	BOYA Magic AI-Powered Transformable Wireless Microphone User Manual Comprehensive user manual for the BOYA Magic AI-Powered Transformable Wireless Microphone system, detailing its features, product structure, operation, specifications, and troubleshooting for content creators.
	BOYA mini 2: Upgraded Super Mini Wireless Microphone User Manual Comprehensive user manual for the BOYA mini 2, an upgraded super-mini wireless microphone system featuring AI noise reduction, long battery life, and versatile compatibility for smartphones, tablets, and cameras. Learn about setup, features, specifications, and troubleshooting.

BOYA BY-V10