BOYA Ultracompact 2.4GHz Wireless Microphone System
User Manual
Product Structure: BY-V1-TX/BY-V2-TX: Wireless Transmitter
1. Built-in Microphone
2. Status Indicator
| Status | Indicator |
|---|---|
| Unpaired | Blinking blue and red alternately |
| Paired Successfully | Static blue |
| Mute | Blinking blue |
| Noise Reduction ON | Static green |
| Low Battery | Blinking red |
| Charging | Static red |
| Fully Charged | Red light off |
Note:
- If charging the unit when it is ON, the indicator will display the current working status instead of charging status.
- Please charge the transmitter in time when in a low battery status, or it will auto shut off within 10 mins.
- The function of noise reduction cannot be turned on or off in mute mode.
3. NR Button
Press to turn on or off the function of noise reduction.
4. Power Button
- Press and hold for 2 seconds to power on or off.
- Press to mute or unmute the microphone.
5. Belt Clip
It can rotate 360 degrees. ?
6. USB-C Charging Port
For charging the transmitter.
7. Foam Windscreen
Product Structure: BY-V1-RX/BY-V2-RX: Compact Receiver with Lightning Connector
1. Status Indicator
| Status | Indicator |
|---|---|
| Unpaired | Blinking blue |
| Paired Successfully | Static blue |
2. MFi Certified Lightning Connector
It can be connected to an iOS Lightning device.
3. USB-C Charging Port
When the BY-V1-RX or BY-V2-RX is plugged into an external device, the external device can be powered via this charging port.
Note: iPhones and iPads can be powered and charged through this port while in use, which also supports up to 3A charging current.
Product Structure: BY-V10-RX/BY-V20-RX: Compact Receiver with USB-C Connector
1. Status Indicator
| Status | Indicator |
|---|---|
| Unpaired | Blinking blue |
| Paired Successfully | Static blue |
2. USB-C Connector
It can be connected to an Android Smartphone, Tablet, Computer and other USB-C devices.
3. USB-C Charging Port
When the BY-V10-RX or BY-V20-RX is plugged into an external device, the external device can be powered via this charging port.
Note: Most USB-C devices can be powered and charged through this port while in use.
How to Use
For the kit of BY-V1/BY-V10
- Press and hold the power button for 2 seconds to turn on the BY-V1-TX transmitter.
- Plug the BY-V1-RX into an iOS Lightning device or the BY-V10-RX into a USB-C device.
- Transmitter and receiver will be successfully paired within 10 seconds.
- You are ready to record.
For the kit of BY-V2/BY-V20
- Press and hold the power button for 2 seconds to turn on two BY-V2-TX transmitters.
- Plug the BY-V2-RX into an iOS Lightning device or the BY-V20-RX into a USB-C device.
- Transmitters and receiver will be successfully paired within 10 seconds.
- You are ready to record.
Note: Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.
Specifications
| Parameter | Specification |
|---|---|
| Transmission Type | 2.4GHz |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz-16kHz |
| Signal-to-noise Ratio | 80dB |
| Sensitivity | -42dB |
| Operating Range | 50m (without obstacles) |
| RF Output Power | 6dBm |
| Charging Port | USB-C |
| Transmitter's Battery Capacity | 95mAh |
| Transmitter's Charging Time | Approx. 2 hours |
| Transmitter's Battery Life | Approx. 9 hours |
| Receiver's Power Requirement | Supplied by External Devices |
| Weight | BY-V1-TX/BY-V2-TX: 9.5g |
| BY-V1-RX/ BY-V2-RX: 6g | |
| BY-V10-RX/ BY-V20-RX: 6g | |
| Dimensions | BY-V1-TX/BY-V2-TX: 52.22×25.23×19.75mm |
| BY-V1-RX/BY-V2-RX: 43.92×23.5×9.3mm | |
| BY-V10-RX/ BY-V20-RX: 43.92×24.7×9.3mm |
Packing List
BY-V1
- BY-V1-TX Transmitter ×1
- BY-V1-RX Receiver ×1
- USB-C Charging Cable ×1
- Foam Windscreen ×1
BY-V10
- BY-V1-TX Transmitter ×1
- BY-V10-RX Receiver ×1
- USB-C Charging Cable ×1
- Foam Windscreen ×1
BY-V2
- BY-V2-TX Transmitter ×2
- BY-V2-RX Receiver ×1
- USB-C Charging Cable ×2
- Foam Windscreen ×2
BY-V20
- BY-V2-TX Transmitter ×2
- BY-V20-RX Receiver ×1
- USB-C Charging Cable ×2
- Foam Windscreen ×2
