Product Overview
The RAINPOINT Sprinkler Timer 2 Outlet is a programmable water timer designed for efficient garden and yard irrigation. It features independent control for two zones, allowing for customized watering schedules. With an easy-to-read 2.5" LCD display and user-friendly controls, managing your watering needs has never been simpler. Key features include flexible programming options, manual and automatic modes, and a rain delay function to prevent overwatering.
Figure 1: RAINPOINT Sprinkler Timer 2 Outlet, showing the main unit with its dual outlets and large LCD screen.
Setup and Installation
Follow these steps to set up your RAINPOINT Sprinkler Timer:
- Battery Installation: Open the battery compartment (refer to Figure 5 for location) and insert 2 AA batteries. Ensure correct polarity. The timer features a low battery alert to prevent water leakage.
- Connect to Faucet: Attach the timer securely to your outdoor faucet. The durable inlet with a built-in filter helps prevent debris from entering the system and reduces water leakage.
- Connect Hoses: Attach your garden hoses to the two independent outlets (Zone 1 and Zone 2) at the bottom of the timer. The wider outlets are designed for smoother water flow.
- Initial Setup: Turn the dial to "SET CLOCK" to set the current time. Use the "+" and "-" buttons to adjust and "OK" to confirm.
Figure 2: Overview of upgraded features including extra waterproof LCD window, longer inlet, wider outlets, and IP65 waterproof rating.
Figure 3: Close-up of the durable inlet with a filter, designed to prevent leakage and ensure clean water flow.
Figure 4: Image showing the battery compartment, highlighting the use of 2 AA batteries and the upgraded IP65 waterproof ring for enhanced protection.
Video 1: An informational video explaining the benefits and features of the 2-zone water timer, including its dual functionality for different watering needs.
Operating Instructions
The RAINPOINT Sprinkler Timer offers flexible programming for optimal watering:
- Setting Start Time: Turn the dial to "START TIME". Use "+" and "-" to set the desired watering start time for each zone (Zone 1 and Zone 2 can be set independently). Press "OK" to confirm.
- Setting How Long: Turn the dial to "HOW LONG". Set the watering duration from 1 minute to 3 hours 59 minutes. This can be customized for each zone.
- Setting How Often: Turn the dial to "HOW OFTEN". Choose the watering frequency, from 1 hour to 12 hours, or from 1 day to 7 days. Up to 38 watering frequencies are available.
- Manual Watering: The timer supports 3 separate manual/auto modes: ZONE 1, ZONE 2, or Both ZONE. To activate manual watering, press the "MANUAL" button. Manual watering time can be set from 1 minute to 8 hours.
- Rain Delay: To temporarily pause watering due to rain, use the "DELAY" button. You can set a delay for 24, 48, or 72 hours to prevent overwatering.
Figure 5: The large programming dial and bright white buttons make setting schedules intuitive and easy to read.
Figure 6: The timer's dual-zone capability allows for independent or simultaneous watering of two distinct areas.
Figure 7: The rain delay feature helps conserve water by pausing scheduled watering for 24, 48, or 72 hours.
Video 2: A demonstration of the 2.7-inch LCD display and its clear interface for setting watering schedules.
Maintenance
- Battery Replacement: When the battery level drops below 5%, a low-battery alert will appear on the display, and the valve will automatically shut off to prevent continuous water flow. Replace batteries promptly to ensure uninterrupted operation.
- Inlet Filter Cleaning: Periodically check and clean the filter located in the timer's inlet connection to prevent debris buildup and maintain optimal water flow.
- Winterization: Before freezing temperatures, disconnect the timer from the faucet and hoses. Drain any remaining water and store the timer indoors in a dry, protected area to prevent damage from freezing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer not watering / Valve not opening | Low battery; Incorrect programming; Water pressure too low. | Replace batteries; Check and adjust watering schedule; Ensure adequate water pressure from faucet. |
| Water leakage at connections | Loose connection; Worn gasket; Damaged threads. | Tighten connections; Replace gaskets; Use plumber's tape on threads if necessary. |
| Display not working | Dead batteries; Extreme temperatures. | Replace batteries; Move timer to a moderate temperature environment. |
If issues persist, please refer to the support section for further assistance.
Specifications
- Model Number: TCITV205NHV2-C
- Color: Grey-green
- Material: Plastic
- Product Dimensions: 2.9"D x 5.4"W x 5.4"H
- Item Weight: 8.48 ounces
- Number of Settings: 38 programs
- Screen Size: 2.5 Inches LCD
- Power Source: 2 AA Batteries (not included)
- Watering Duration: 1 min to 3 hrs 59 mins (Auto), 1 min to 8 hrs (Manual)
- Watering Frequency: 1 hour to 12 hours, or 1 day to 7 days
- Waterproof Rating: IP65
Warranty and Support
RAINPOINT is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, many customers have reported positive experiences with RAINPOINT's support team, including prompt responses and product replacements for issues.
For further assistance, you may refer to the official User Guide (PDF) available online or contact RAINPOINT customer service directly. Contact information can typically be found on the product packaging or the official RAINPOINT website.
User Guide (PDF): Download User Guide
