VICSEED Tesla Phone Mount Instruction Manual

1. Introduction

The VICSEED Magnetic Car Mount is designed to seamlessly integrate with your Tesla Model 3, Model Y, Juniper, or Cybertruck. This foldable and hidden phone holder provides a secure and adjustable solution for mounting your smartphone, ensuring clear visibility and easy access while driving. It features ultra-powerful N52 magnets for strong adhesion and is compatible with all phone types, including MagSafe-enabled devices and others using the provided metal rings.

2. What's in the Box

• MagSafe Phone Mount x 1
• Accessories Package x 1
• Touchscreen Mount x 1
• Metal Ring x 2
• User Guide x 1

3. Setup and Installation

Note: For optimal adhesion, please watch the installation video first and follow the steps. Use the installation frame for placement, then press firmly for 3 minutes. Allow the adhesive to cure for 6 hours before attaching your phone.

3.1. Mount Installation on Tesla Screen

1. Clean the back of your Tesla touchscreen thoroughly where the mount will be placed.
2. Attach the touchscreen mount using the provided 3M adhesive. Use the installation frame to ensure precise placement. Press firmly for 3 minutes.
3. Allow the adhesive to cure for 6 hours before proceeding to attach your phone.

3.2. Phone Preparation (for non-MagSafe devices)

If your phone or phone case does not have built-in MagSafe compatibility, use the provided metal rings to enable magnetic attachment.

1. Use the alignment guide (Match-up Card) to find the optimal center position on the back of your phone or phone case.
2. Peel off the adhesive backing from one of the metal rings.
3. Carefully apply the metal ring to the marked position on your phone or case. The hollow design of the metal ring ensures it will not interfere with wireless charging.

3.3. Installation Video

4. Operating Instructions

4.1. Attaching Your Phone

Once the mount is securely installed and any necessary metal rings are applied to your phone/case, simply bring your phone close to the magnetic surface of the mount. The powerful N52 magnets will automatically align and securely hold your phone in place.

4.2. Adjusting Viewing Angle

The mount features a flexible 360-degree ball joint, allowing you to easily adjust your phone to any desired viewing angle, whether in portrait or landscape orientation. This ensures optimal visibility for navigation or other applications without obstructing your view of the road or the Tesla's main screen.

4.3. Folding and Hiding the Mount

The mount's foldable design allows it to be discreetly hidden behind the Tesla screen when not in use. Simply fold the arm back to conceal the mount, maintaining the minimalist aesthetic of your Tesla interior.

5. Maintenance

To maintain the appearance and functionality of your VICSEED phone mount, wipe it occasionally with a soft, dry cloth. The 3M adhesive is designed to be long-lasting and should not leave residue if removed properly.

6. Troubleshooting

6.1. Phone Not Sticking Securely

• Ensure the 3M adhesive on the mount has fully cured for at least 6 hours before attaching your phone.
• For non-MagSafe phones, verify that the metal ring is correctly centered and securely attached to your phone or case.
• Check that your phone case is not excessively thick, as this may reduce magnetic strength.

6.2. Mount Falling Off

• Re-check the installation steps, ensuring the surface was clean and dry before applying the 3M adhesive.
• Ensure sufficient curing time (6 hours) was allowed before placing any weight on the mount.
• If the issue persists, contact customer support for assistance.

7. Specifications

8. Warranty and Support

The VICSEED Tesla Phone Mount comes with a 2-year service support. If you encounter any product problems or require assistance, please contact VICSEED customer service directly for satisfactory solutions.