TECKNET Wireless Doorbell Instruction Manual

Introduction

Thank you for choosing the TECKNET Wireless Doorbell. This self-powered doorbell system offers convenience and reliability with its plug-through receiver, long wireless range, and customizable chime options. Designed for ease of use and durability, it ensures you never miss a visitor.

Image: The TECKNET Wireless Doorbell system, featuring the plug-through receiver on the left and the self-powered push button on the right.

Product Overview

Components

• Doorbell Push Button (Transmitter): The outdoor unit that sends the signal when pressed. It is self-powered, requiring no batteries.
• Doorbell Receiver (Chime Unit): The indoor unit that plugs into a standard electrical outlet and produces the chime sound. It features a pass-through socket.

Key Features

• Plug-through Design: The receiver plugs into a wall outlet without blocking it, allowing you to use the outlet for other devices.
• Self-powered Transmitter: The push button generates its own power with each press, eliminating the need for batteries.
• Wide Range of Ringtones: Choose from 60 distinct ringtones to personalize your doorbell experience.
• Adjustable Volume: Five volume levels ranging from 0dB (mute) to 110dB, suitable for various environments and needs. A flashing LED indicator provides a visual alert for the hearing impaired.
• IP66 Waterproof Transmitter: The outdoor push button is highly durable and resistant to dust and water, ensuring reliable operation in diverse weather conditions.
• Extended Wireless Range: Operates effectively up to 1300 feet (400 meters) in open areas, providing reliable signal transmission even through walls.
• Memory Function: The doorbell remembers your last selected chime and volume level after a power outage.

Setup

Step 1: Install the Doorbell Push Button (Transmitter)

The push button can be installed using either double-sided adhesive tape or screws.

1. Choose a Location: Select a flat, clean surface near your door, ensuring it is easily accessible to visitors.
2. Adhesive Installation (Recommended for most surfaces):
   • Clean the installation area thoroughly to remove dust and debris.
   • Peel off one side of the provided double-sided adhesive tape and firmly attach it to the back of the doorbell push button.
   • Peel off the other side of the tape and press the push button firmly onto the desired location for at least 30 seconds.
3. Screw Installation (For rough or uneven surfaces):
   • Separate the back plate from the push button.
   • Mark the positions for the screw holes on the wall using the back plate as a template.
   • Drill pilot holes at the marked positions.
   • Insert the provided wall anchors (if necessary) into the pilot holes.
   • Secure the back plate to the wall using the provided screws.
   • Attach the push button to the secured back plate.

Image: Visual guide illustrating two installation methods for the doorbell push button: double-sided adhesive and screw mount.

Step 2: Plug in the Doorbell Receiver (Chime Unit)

1. Plug the doorbell receiver into any standard electrical outlet inside your home.
2. Ensure the outlet is within the 1300ft wireless range of the push button.
3. The receiver features a pass-through socket, allowing you to plug other electrical devices into it.

Image: The doorbell receiver plugged into an outlet, demonstrating its pass-through design that allows another appliance to be plugged into it.

Step 3: Pairing (Pre-paired from factory)

Your TECKNET Wireless Doorbell is pre-paired at the factory. Simply install the button and plug in the receiver, and it should work immediately.

If re-pairing is needed (e.g., adding more buttons/receivers or after a reset):

1. Press and hold the volume button on the receiver for 5 seconds until it emits a "ding" sound and the LED indicator flashes. This indicates it's in pairing mode.
2. Immediately press the doorbell push button. The receiver will chime, confirming successful pairing.
3. To pair multiple buttons with one receiver, repeat step 2 for each additional button.
4. To pair multiple receivers with one button, put all receivers into pairing mode (step 1), then press the button once.

Operating Instructions

Changing Ringtones

The receiver offers 60 different ringtones. To cycle through them:

• Press the "Music Selection" button on the side of the receiver to preview the next ringtone.
• Once you find your desired ringtone, press the doorbell push button to set it. The receiver will remember this selection.

Adjusting Volume

The receiver has 5 adjustable volume levels (0-110dB). To adjust the volume:

• Press the "Volume Control" button on the side of the receiver repeatedly to cycle through the volume levels.
• The receiver will play a sample sound at each level.
• The lowest setting (0dB) is mute, indicated by only the flashing LED.

Image: Illustration of the 5 volume levels (0-110dB) and the variety of 60 ringtones available, showing different scenarios where the doorbell can be used.

Memory Function

The doorbell receiver is equipped with a memory function. It will automatically save your last selected ringtone and volume level even after a power outage or if unplugged.

Image: Depiction of the doorbell receiver in a bedroom setting, highlighting its memory function for chime and volume settings.

Maintenance

• Cleaning: Wipe the doorbell push button and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Outdoor Unit Care: While the push button is IP66 waterproof, avoid submerging it in water. Ensure the installation surface is stable to prevent accidental dislodgement.
• No Battery Replacement: The self-powered design means you will never need to replace batteries in the push button.

Troubleshooting

Specifications

Warranty and Support

TECKNET offers a 36-month warranty for registered products. For any questions, technical support, or warranty claims, please contact TECKNET customer service through their official website or the platform where you purchased the product.

For more information, visit the official TECKNET store: TECKNET Store