TECKNET Wireless Doorbell
Model: HWD01162
User Manual
Product Features
- Stylish, sleek exterior design.
- Powerful transmitter provides an amazing 250 metres range for remote control.
- You can easily select and change chimes to suit your taste or occasion.
- Four-level adjustable volume control for each receiver.
Product Specifications
| Specification | Details |
|---|---|
| Receiver Power Supplied | AC 85V ~265V |
| Receiver Working Current | <5mA |
| Transmitter Battery Type | DC 3V |
| Working Frequency | 433.92MHz |
| Transmission Power | 10 dBm |
Package Contents
The package includes:
- 1 x Receiver
- 1 x Transmitter
- 1 x Double-Sided Adhesive Tape
- 1 x User Manual
Diagram Description: Illustration shows items included in the package: one receiver, one transmitter, one double-sided adhesive tape, and one user manual.
Product Layout
Diagram Description: The product layout diagram shows the receiver and transmitter. The receiver has three buttons: Music+, Volume (central circle), and Music-. The transmitter has one button. Numbered indicators point to LED Indicator (1), Music+ Button (2), Volume Button (central circle) (3), and Music- Button (4).
Receiver Instructions
Simply plug the receiver into a standard electrical socket. A warning tone "Ding-Dong" ? will sound, indicating that the receiver is powered on.
Volume Adjustment
You can adjust the volume through 4 different levels by cycling through the volume button.
To Change the Chime
This can be done before or after pairing the device.
- Plug in the receiver; a chime prompt will sound.
- Press the Music + or Music - buttons to cycle through the different chimes available on the receiver.
- Once you have found a chime you like, let it play.
- If your transmitter is already paired, pressing the transmitter button will now play your selected chime.
- If the transmitter is not paired, or if the selected chime does not play, please follow the instructions for deleting the pair, select your chime again, and then re-pair the device as instructed below.
To Pair the Device
Follow these steps to pair the transmitter with the receiver:
- Plug in the receiver.
- Press and hold both the Music + button (top button) and the Volume button (central circle) simultaneously. The LED indicator on the receiver will light up.
- Release both buttons simultaneously.
- While the LED indicator is lit, press the transmitter button once. The LED on the receiver will flash once to confirm.
- Finally, press the Volume button (central circle) again to complete the pairing process.
Delete Pairing Method
To remove existing pairings:
- Unplug the receiver.
- Press and hold the Volume button (central circle) and plug the receiver back in. Do not release the button for 5-10 seconds, during which time the LED indicator will start flashing.
- Release the button after the LED indicator turns off.
- The previous pairing mode is now removed. You will hear a ring tone to confirm the deletion.
Receiver & Transmitter Installation
To install the receiver and transmitter:
- Apply the provided double-sided adhesive tape to the back of the receiver or transmitter case.
- Remove the outer protective layer of the tape.
- Attach the receiver/transmitter to your desired location and press firmly for 32 seconds to ensure a secure bond.
Maintenance
Proper maintenance ensures longevity and optimal performance:
- Ideally, use high-quality alkaline batteries ? which last longer and reduce the risk of electrolyte leakage.
- To protect the precision internal electronic components, it is advisable that users without proper qualifications do not attempt to open the unit for maintenance. ?️
- Avoid exposing the unit to continuous direct sunlight ☀️ or humid environments ?, as this can adversely affect its performance and lifespan.
- Correct use and care of the product will help to effectively extend its service life. ✔️
IMPORTANT SAFETY INSTRUCTIONS
CAREFULLY FOLLOW THESE INSTRUCTIONS.
- 1. SAVE THESE INSTRUCTIONS - This sheet contains important safety and operating instructions.
- 2. Before using the product, read all instructions and caution markings on the product, accessories, and device using our product.
- 3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- 4. Children should be supervised to ensure that they do not play with the appliance.
- 5. Keep the product away from fire or explosion may occur.
- 6. For proper insertion, please observe polarity indicators (+/-).
- 7. Remove the batteries if the product is not going to be used for a long period of time.
- 8. Do not place product in or near inflammable, explosive, or hazardous objects.
- 9. The doorbell is waterproof to some extent, but it still needs protection to be durable. Do not place in or near water, rain, excess moisture, or extreme heat.
- 10. Do not operate product with a damaged cord or plug.
- 11. Do not operate product if it has been damaged in any way.
- 12. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- 13. Do not throw or shake the product.
- 14. To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.
Warranty Information
Limited 12-Month Warranty
What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: "Unichain") warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
Period of coverage: Unichain warrants the TECKNET product for 12 Months.
Correction of problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty: All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain's request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to Claim the Warranty
Please contact retailers or visit the TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit the TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete. No liability can be accepted for any errors or omissions, and TECKNET reserves the right to make any changes without further notice to any products mentioned herein.
Simplified EU Declaration of Conformity
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type HWD01162 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/
