TECKNET Wireless Doorbell

Package Contents

The package includes:

• 1x Receiver
• 1x Push Button
• 1x User Manual
• 1x Double Sided Adhesive Tape
• 3x AA Batteries (for receiver)
• 1x CR2032 Battery (for push button)

Specifications

Receiver

• Working Voltage: DC 4.5V
• Power Consumption: 0.5W

Push Button

• Working Voltage: DC 3V (CR2032 x1)
• Working Current: 25mA
• Transmission Power: 10 dBm

Product Overview

Receiver

1. Previous Chime/Mode Button
2. Next Chime/Pairing Button
3. Volume Button
4. LED Light
5. Battery Compartment

Push Button

1. LED Light
2. Screw Hole

Installation

Install Push Button

Method 1: Install with the Double-sided Tape

1. Remove the battery isolation strip on the push button before use.
2. Stick the push button to the wall using the included double-sided tape.

Method 2: Install with the Screws

1. Remove the battery isolation strip.
2. Use a small standard screwdriver to detach the battery cover.
3. Anchor a large screw on the wall.
4. Hang the doorbell receiver on the screw.
5. Screw mount the battery cover on the wall using a Phillips screwdriver.
6. Snap the push button onto the battery cover.
7. Fix the push button with the small screw.

Tools needed for installation: Standard Screwdriver, Phillips Screwdriver.

How to Use

Pair Push Button to Receiver

The Push Button and Receiver are already paired out of the box. If re-pairing is needed:

1. Press and hold the "Next Chime" button for over 3 seconds. You will hear a "ding dong" prompt, indicating the receiver is in pairing status.
2. Press the Push Button. The receiver will play the selected chime, confirming the pairing is complete.

Pairing Tips

• One pairing operation connects one Push Button.
• One receiver can be paired with up to 20 Push Buttons.

Clear Pairing Record

Press and hold the Volume Button for over 5 seconds. You will hear a "ding dong, ding dong" prompt, indicating that all pairing records have been cleared.

Receiver Operation

1. Power Prompt: Install three AA batteries into the receiver. A "ding dong" tone confirms normal function.
2. Switch Working Mode: Press and hold the "Previous Chime" button for 3 seconds to switch between two modes: ringing only, or ringing & flashing light.
3. Select a Chime: Press the "Previous Chime" or "Next Chime" button once to cycle through available chimes. Stop when you hear your desired chime.
4. Select a Volume Level: Press the Volume button to choose from 5 volume levels (mute, low, medium, high, and max).

Indicators

Low Battery Indicator

When the receiver's battery power is low, the LED light stays on. Please replace the batteries.

Important Safety Instructions

• Retain these instructions.
• Read all instructions and caution markings before use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• Supervise children to ensure they do not play with the appliance.
• Keep the product away from fire to avoid explosion.
• Observe polarity indicators (+/-) for proper battery insertion.
• Remove batteries if the product will not be used for a long period.
• Do not place the product in or near flammable, explosive, or hazardous objects.
• The doorbell is waterproof to some extent but requires protection. Do not place it in or near water, rain, excessive moisture, or extreme heat.
• Do not operate the product if it has been damaged.
• Do not disassemble the product, as this may result in safety hazards.
• Do not throw or shake the product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician.

Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

Simplified EU Declaration of Conformity

Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-WD995 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://teckneteu.com/

Limited 12-Month Warranty

What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser that the TECKNET product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage: 12 Months.

What will be done to correct problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges).

What is not covered: Warranties are void if the TECKNET product is not provided for inspection upon request, or if it has been improperly installed, altered, or tampered with. The warranty does not protect against acts of God, theft, normal-use wear and tear, abuse, or damage due to low voltage disturbances, non-authorized programs, or system equipment modification.

How to claim the warranty: Contact retailers, visit the TECKNET website, or email support@tecknetonline.com. Register TECKNET products within 90 days of purchase to extend the warranty period.

Disclaimer

Every effort has been made to ensure the accuracy and completeness of the information in this guide. However, no liability can be accepted for any errors or omissions. TECKNET reserves the right to make changes without further notice.

Correct Disposal of This Product

This marking on the product or its literature indicates it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract.

IC Caution

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.