TeckNet HWD01806 Wireless Doorbell

Product Overview

This document provides information for the TeckNet HWD01806 Wireless Doorbell, including its components, specifications, setup, and usage.

Components:

• Transmitter (Kinetic Bell Push)
• Receiver

Specifications

• Receiver Power Supply: AC 100-240V
• Receiver Working Power: <0.5W
• Transmission Power: -12.23dBm

How to Pair

Note: This device is already paired.

If you experience disconnection or short-range issues, follow these steps:

1. Press and hold the receiver's pairing button "♪" for 3 seconds until the receiver emits a "Ding-Ding" sound.
2. Press the kinetic bell push.
3. The receiver will emit a "Ding" sound, indicating successful pairing between the kinetic bell push and the receiver.
4. The receiver will emit another "Ding-Ding" sound to exit pairing mode.

How to Use

• ? Music Button: Press once to play the next chime; press twice to go back to the previous chime.
• ? Volume Button: Press to adjust through 5 volume levels: Mute, Low, Medium, High, Max.

Install the Transmitter

Two installation methods are available:

A. Double-sided Tape Installation

Use the included double-sided adhesive tape to securely stick the transmitter to the desired wall surface.

B. Screw Installation

1. Use a small standard screwdriver to detach the back plate from the transmitter.
2. Mount the back plate onto the wall using a Phillips screwdriver and the provided screws.
3. Snap the transmitter onto the mounted back plate.

Package Contents

• 1x Doorbell
• 1x Double-Sided Adhesive Tape
• 2x Screws
• 2x Screw-joint Coupling
• 1x User Manual

Maintenance

1. To protect the precision internal electronic components, it is advisable that unqualified users do not attempt to open the unit for maintenance.
2. Correct use of the product helps to effectively extend its service life.

Precaution

Caution: Do not connect and use the doorbell socket with high-power electrical appliances, such as bread machines, microwave ovens, ice machines, vacuum cleaners, etc.

Important Safety Instructions

CAREFULLY FOLLOW THESE INSTRUCTIONS.

1. RETAIN THESE INSTRUCTIONS - This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from fire to avoid an explosion.
6. For proper insertion, please observe polarity indicators (+/-).
7. Remove the batteries if the product is not going to be used for a long period.
8. Do not place the product in or near an inflammable, explosive, or hazardous object.
9. Do not operate the product with a damaged cord or plug.
10. Do not operate the product if it has been damaged in any way.
11. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
12. Do not throw or shake the product.

Limited 12-Month Warranty

What this warranty covers: Shenzhen Unichain Technology Co., Ltd. (Manufacturer: “Unichain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage: Unichain warrants the TeckNet product for 12 Months.

Correction of problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty: All above warranties are null and void if the TeckNet product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty: Please contact retailers or visit the TeckNet website or email support@eu.tecknetonline.com for more information. To extend the warranty period, please visit the TeckNet website and register your TeckNet products within 90 days of purchase.

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete. No liability can be accepted for any errors or omissions, and TeckNet reserves the right to make any changes without further notice to any products mentioned herein.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type HWD01806 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://teckneteu.com/

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.