1. Introduction
The PUR 7-Cup Water Filter Pitcher is designed to provide cleaner, great-tasting water by reducing various contaminants found in tap water. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PUR water pitcher.
Image 1.1: The PUR 7-Cup Water Pitcher, showcasing its clear body and blue filter housing.
The pitcher features a Genuine PUR water filter with advanced 2-in-1 filtration technology, certified by NSF to reduce substances such as chlorine, mercury, and microplastics. Its compact design allows it to fit conveniently in most refrigerators, and its components are dishwasher safe for easy cleaning.
2. Product Overview
The PUR 7-Cup Water Pitcher system consists of the following main components:
- Pitcher Reservoir: The main body that holds filtered water.
- Filter Housing: The upper section where the filter is inserted and unfiltered water is poured.
- Genuine PUR Filter: The replaceable filter cartridge responsible for purification.
- Lid: Features an easy-fill opening and a stay-tight design.
- Filter Change Light: An indicator on the lid that signals when it's time to replace the filter.
Image 2.1: A detailed view of the PUR filter, highlighting its 2-in-1 filtration capabilities.
The 2-in-1 Faster Filtration technology is designed to reduce chlorine for improved taste and is NSF certified to reduce mercury. Each filter provides up to 40 gallons of cleaner water, typically lasting about 2 months with regular use.
3. Setup
Follow these steps to set up your PUR 7-Cup Water Pitcher for first use:
- Wash Components: Before first use, wash the pitcher reservoir, filter housing, and lid with mild dish soap and warm water. Rinse thoroughly. All components, except the filter, are dishwasher safe.
- Prepare Filter: Remove the new PUR filter from its packaging. Submerge the filter in cold water for 15 seconds to remove any loose carbon dust.
- Insert Filter: Firmly insert the prepared filter into the filter housing. Ensure it is seated correctly to prevent unfiltered water from bypassing the filter. There is a specific orientation for the blue insert; ensure it aligns properly for the lid to sit flush.
- Assemble Pitcher: Place the filter housing with the installed filter into the pitcher reservoir. Secure the lid onto the filter housing.
- Initial Filtration: Fill the filter housing with cold tap water. Discard the first two pitchers of filtered water, as this helps to flush out any remaining carbon dust and activate the filter.
Image 3.1: The pitcher in use, demonstrating its easy-fill lid and pouring capabilities.
4. Operating Instructions
Using your PUR 7-Cup Water Pitcher is straightforward:
- Filling: Lift the easy-fill lid and pour cold tap water directly into the filter housing. The water will slowly pass through the filter into the main pitcher reservoir.
- Pouring: Once the water has filtered, you can pour it from the pitcher. The stay-tight lid is designed to remain secure during pouring.
- Storage: Store the pitcher in your refrigerator for chilled, filtered water. Its slim design allows it to fit conveniently in most fridge doors.
Image 4.1: The pitcher's versatility, showing it stored in a fridge and used for various pouring needs.
The filter change light on the lid will indicate when it's time to replace the filter, ensuring consistent water quality.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your PUR water pitcher:
- Cleaning the Pitcher: The pitcher reservoir, filter housing, and lid are dishwasher safe. For best results, place them on the top rack of your dishwasher. Hand washing with mild soap and water is also an option. Do not wash the filter in the dishwasher.
- Filter Replacement: Replace the PUR filter approximately every 2 months or after filtering 40 gallons of water, whichever comes first. The filter change light on the lid will alert you when replacement is due. Follow the filter preparation and insertion steps outlined in the Setup section when replacing a filter.
Image 5.1: The pitcher's components, excluding the filter, are safe for dishwasher cleaning.
6. Troubleshooting
If you encounter issues with your PUR 7-Cup Water Pitcher, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water filters very slowly or stops filtering. | Filter is clogged or airlocked. | Remove the filter. Turn it upside down and shake vigorously to redistribute the filtering media. Rinse the drain ports under cold water for 30 seconds, then warm water for 30 seconds. Reinsert the filter and try again. If the issue persists, the filter may need replacement. |
| Lid does not fit securely. | Filter housing or lid is misaligned. | Ensure the filter is correctly seated in the filter housing. Check that the filter housing is properly placed in the pitcher. Align the lid with the filter housing and press down firmly until it clicks into place. |
| Water tastes or smells unusual after filtering. | New filter not properly flushed or filter needs replacement. | Ensure you have discarded the first two pitchers of filtered water after installing a new filter. If the filter has been in use for over 2 months or 40 gallons, replace it with a new Genuine PUR Filter. |
Image 6.1: Enjoying clean, filtered water from the PUR pitcher.
7. Specifications
- Brand: PUR
- Model Name: PUR 7 Cup Pitcher Filtration System
- Model Number: PPT700WAMA
- Capacity: 7 Cups
- Product Dimensions: 9.6"L x 9.6"W x 10.1"H
- Item Weight: 1.63 pounds
- Filter Life Cycle: Approximately 2 Months or 40 Gallons
- Installation Type: Countertop
- Power Source: Manual
- Special Feature: Lightweight, Portable
- UPC: 328785005073
8. Warranty and Support
For information regarding product warranty, replacement parts, or additional support, please visit the official PUR website or contact their customer service. Always ensure you are using Genuine PUR Filters for optimal performance and to maintain product warranty.
You can find more information and products on the PUR Brand Store.
