Introduction
Thank you for choosing the hykolity 200W UFO LED High Bay Light Fixture. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new lighting product. Please read these instructions thoroughly before installation and retain them for future reference.
This high-performance LED fixture is designed for various commercial and industrial applications, including warehouses, workshops, factories, garages, and supermarkets, offering superior brightness and energy efficiency.
Safety Information
WARNING: To prevent electric shock, fire, or injury, always turn off the power at the circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Do not look directly into the light source when the fixture is powered on, as it can cause eye damage due to extreme brightness.
- Ensure the mounting surface can support the weight of the fixture.
- Use only accessories and parts recommended by the manufacturer.
- Do not modify the fixture in any way.
- Keep flammable materials away from the fixture when in operation.
- This fixture is rated IP65 for wet locations, but ensure all connections are properly sealed during installation.
Package Contents
Verify that all components are present and undamaged before installation. If any parts are missing or damaged, contact customer service.
- hykolity 200W UFO LED High Bay Light Fixture (2 units)
- US Hook for hanging (2 units)
- 5ft Power Cord with 3-prong US Plug (2 units)
- Safety Rope (2 units)
- Instruction Manual
Specifications
| Specification | Value |
|---|---|
| Model Number | KLHB200WCD-50K |
| Wattage | 200W |
| Lumen Output | 26,000 lm |
| Color Temperature | 5000K Daylight |
| Voltage | 120-277V |
| Beam Angle | 120 degrees |
| IP Rating | IP65 (Waterproof) |
| Material | Aluminum |
| Product Dimensions | 11"L x 11"W x 2.7"H |
| Lifetime | 50,000+ hours |
| Mounting Type | Hanging |
Installation (Setup)
The hykolity UFO LED High Bay Light is designed for easy, plug-and-play installation. Follow these steps for a secure setup:
- Prepare the Mounting Location: Ensure the ceiling or beam where the light will be hung is structurally sound and can safely support the fixture's weight.
- Attach the US Hook: Securely fasten the provided US hook to the top of the light fixture.
- Hang the Fixture: Use the US hook to hang the light fixture from a suitable mounting point.
- Install Safety Rope: For added security, attach the safety rope from the fixture to a separate, secure anchor point. This prevents the fixture from falling if the primary hook fails.
- Connect Power: Plug the 5ft power cord with the 3-prong US plug into a compatible 120-277V power outlet. No hard-wiring is needed for standard plug-and-play operation.
The light is now ready for use. For optimal light distribution, consider the recommended installation heights:
- 16 ft height for approximately 55 ft diameter coverage.
- 24 ft height for approximately 81 ft diameter coverage.
- 32 ft height for approximately 98 ft diameter coverage.
Image: Easy Installation steps with hook, power cord, and safety rope.
Image: Recommended installation heights and coverage areas.
Video: Demonstrates the installation process and features of the Hykolity LED UFO High Bay Light, including its brightness, secure setup, heat dissipation, and high-performance LED chips.
Operation
Operating the hykolity UFO LED High Bay Light is straightforward. Once properly installed and plugged into a power source, the light can be turned on and off using a standard wall control switch connected to the outlet.
- Ensure the power cord is securely plugged into a functioning outlet.
- Use the wall switch to control the light fixture.
Image: The hykolity UFO LED High Bay Light providing super bright illumination in a garage setting.
Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your hykolity LED High Bay Light.
- Cleaning: Periodically clean the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
- Inspection: Regularly inspect the power cord, plug, and hanging mechanism for any signs of wear, damage, or loose connections. Address any issues promptly.
- Heat Dissipation: The fixture features a die-cast aluminum housing with a hollow design for excellent heat dissipation. Ensure that the cooling fins are not obstructed to maintain optimal performance and lifespan.
Image: Illustration of the heat dissipation mechanism of the light fixture.
Image: The light fixture demonstrating its IP65 waterproof capability.
Troubleshooting
If you encounter issues with your hykolity LED High Bay Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the outlet; Loose connection; Faulty fixture | Check circuit breaker; Ensure plug is fully inserted; Verify wall switch is on; Contact customer service if problem persists. |
| Light flickers | Unstable power supply; Loose wiring; Incompatible dimmer (if applicable) | Ensure stable power; Check connections; This fixture is designed to be flicker-free, if flickering occurs, contact customer service. |
| Reduced brightness | Dust accumulation on lens; Extreme operating temperatures | Clean the lens; Ensure adequate ventilation around the fixture. |
If troubleshooting steps do not resolve the issue, please contact hykolity customer service for assistance.
Warranty and Support
hykolity is committed to providing high-quality products and customer satisfaction. If you have any questions or concerns regarding your 200W UFO LED High Bay Light Fixture, please contact us through your order details. Our dedicated support team aims to reply within 24 hours to ensure a positive purchasing experience.
Please refer to your purchase documentation for specific warranty terms and conditions.
