Important Safety Information
Be cautious when assembling the high headboard to prevent injury. Be aware of sharp edges on the metal frame. Do not exceed the weight capacity of 300 pounds. Always ensure all bolts and connections are securely tightened before use. Keep small parts away from children during assembly.
Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Headboard
- Footboard
- Side Rails (2)
- Metal Slats (12)
- Center Support Legs
- Hardware Pack (bolts, washers, nuts, Allen wrench)
- Installation Manual
Assembly Instructions
This bed frame is designed for quick assembly. All necessary hardware and tools are provided. Please follow these steps carefully for proper setup.
- Step 1: Unpack and Identify Parts
Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part by comparing it to the parts list in the included installation manual.
Image: All components of the bed frame are laid out, including the headboard, footboard, side rails, and hardware.
- Step 2: Attach Side Rails to Headboard and Footboard
Connect the side rails to the headboard and footboard using the provided bolts and the Allen wrench. Ensure the L-shaped plates are correctly aligned for a stable structure. Do not fully tighten bolts until all connections are made.
Image: A hand tightening a bolt on a bed frame joint using an Allen wrench, illustrating the connection process.
Image: Diagram illustrating the alignment of metal pipes into notches for secure assembly.
- Step 3: Install Center Support Legs
Attach the center support legs to the designated points on the middle rail. These legs provide additional stability and support for the mattress.
Image: A close-up view of the bed frame's center support leg, highlighting its attachment to the main frame.
- Step 4: Place Metal Slats
Lay the metal slats across the side rails. Ensure they are evenly spaced and securely seated in their designated slots. The built-in slats are designed to prevent the mattress from sliding.
Image: A diagram illustrating how the mattress is secured by the built-in slats, preventing movement.
- Step 5: Final Tightening
Once all components are in place and aligned, go back and fully tighten all bolts. Ensure all connections are firm and secure for optimal stability and safety.
Image: A close-up showing the robust metal construction and securely fastened joints of the bed frame.
Product Features
- Classic and Romantic Design: Features curved lines and thick tube frames, blending with modern, traditional, farmhouse, and rustic home decors.
- Strong and Durable Construction: Fully constructed of metal frame for large load-bearing capacity. Includes 12 metal slats for strong mattress support. Powder-coated surface offers rust and scratch resistance.
- High Headboard Design: Provides better head protection and a comfortable sitting place for reading or watching TV.
- Enhanced Safety: Built with round corners, a smooth finish, and protective footpads. The high footboard helps keep bedding from falling onto the floor.
- Quick Assembly: Comes with all necessary hardware, tools, and an illustrated manual for easy setup.
Usage Guidelines
The Yaheetech Classic Metal Platform Bed Frame is designed for comfortable and stable sleep. Here are some guidelines for its use:
- No Box Spring Needed: This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring.
- Under-Bed Storage: The frame offers 12.6 inches of ground clearance, providing ample space for under-bed storage containers to help keep your room tidy.
- Mattress Compatibility: Designed for a Twin size mattress measuring 75" L x 39" W.
- Weight Capacity: The bed frame has a maximum weight capacity of 450 lbs. Do not exceed this limit to ensure safety and longevity of the product.
Image: A detailed diagram illustrating the dimensions of the Twin size bed frame, including the 12.6-inch under-bed clearance.
Care and Maintenance
To ensure the longevity and appearance of your Yaheetech bed frame, follow these simple care instructions:
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as they may damage the powder-coated finish.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Avoid Excessive Force: Do not jump on the bed or apply excessive force to the frame, as this can cause structural damage.
- Protective Footpads: The frame is equipped with protective footpads to prevent scratching floors. Ensure these remain intact.
Troubleshooting
If you encounter any issues with your bed frame, please refer to the common problems and solutions below:
- Squeaking Noises: If the bed frame squeaks, it is usually due to loose connections. Re-tighten all bolts, especially those connecting the side rails to the headboard and footboard, and the center support legs.
- Mattress Sliding: The bed frame features built-in slats designed to prevent mattress sliding. Ensure your mattress is correctly positioned within the frame. If sliding persists, verify that the mattress size matches the frame's specifications.
- Instability/Wobbling: This indicates that some connections may not be fully secure. Review all assembly steps and ensure every bolt is tightened. Check that the center support legs are firmly on the ground.
- Missing Parts: If you discover any missing parts during assembly, please contact Yaheetech customer support immediately for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Size | Twin |
| Product Dimensions | 77"L x 41.5"W x 42"H |
| Special Feature | No Box Spring Needed, Under Bed Storage, Sturdy, Squeak Resistant |
| Color | White |
| Finish Type | Powder Coated |
| Included Components | Installation Manual, Headboard, Slat, Footboard |
| Compatible With Mattress Size | 75" L × 39" W |
| Brand | Yaheetech |
| Furniture Finish | Smooth Finish |
| Assembly Required | Yes |
| Ground To Item Distance | 12.6 Inches |
| Item Weight | 32.4 pounds |
| Country of Origin | China |
| Item model number | 1 |
| Date First Available | September 16, 2021 |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Yaheetech website. Keep your purchase receipt for any warranty claims.
