Yaheetech Coat Rack Hall Tree with Shoe Bench Instruction Manual

1. Introduction

Thank you for choosing the Yaheetech Coat Rack Hall Tree with Shoe Bench. This versatile 3-in-1 entryway organizer is designed to provide convenient storage and seating in your home. It features multiple hooks for hanging garments, two spacious shelves for shoe storage, and a sturdy bench for comfortable shoe changing. Please read this manual carefully before assembly and use to ensure proper installation and longevity of your product.

2. Safety Information

• Stability Warning: Secure the unit to the wall with the included anti-tip kit to prevent tipping. This is crucial for safety, especially in households with children or pets.
• Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as needed.
• Do not exceed the maximum weight capacity of 275 lbs for the bench and 2 lbs per hook.
• Keep small parts and packaging materials away from children during assembly.

3. Included Components

Please verify that all parts are present before beginning assembly:

• 1 x Hall Tree Frame
• 1 x Assembly Instructions Manual
• 1 x Accessory Kit (containing screws, bolts, and tools)
• 2 x Anti-tip Kit

Figure 3.1: Overview of all included components and hardware.

4. Setup and Assembly Instructions

Follow these steps to assemble your Yaheetech Coat Rack Hall Tree. It is recommended to have two people for assembly.

Assembly Video Guide

Step-by-Step Assembly

1. Assemble the Bench Frame: Attach the metal support bars to the underside of the wooden bench using the provided screws. Ensure they are aligned with the pre-drilled holes.
2. Attach Side Frames: Connect the vertical side frames to the bench assembly. Secure them firmly with screws.
3. Install Shoe Shelves: Slide the two slatted shoe shelves into the designated slots on the lower section of the side frames. Ensure they are level and secure.
4. Connect Upper Frame: Attach the upper horizontal bar to the top of the vertical side frames. Tighten all connections.
5. Install Wooden Hook Boards: Secure the two wooden boards with pre-attached hooks to the upper section of the frame using the appropriate screws.
6. Attach Adjustable Feet: Screw the adjustable protective feet into the bottom of the bench frame. Adjust them to level the unit on uneven surfaces.
7. Install Anti-Tip Kit: Following the instructions in the accessory kit, securely attach the anti-tip straps to the top of the hall tree and to a wall stud. This step is critical for stability.

Figure 4.2: Proper installation of the anti-tip kit for enhanced stability.

5. Operating Instructions

The Yaheetech Hall Tree is designed for intuitive use and organization.

Using the Movable Hooks

The 9 metal hooks are designed to be movable. You can slide them along the wooden boards to adjust spacing according to your needs, or fix them in place if desired. Use them to hang coats, hats, scarves, bags, keys, and other accessories.

Figure 5.1: The flexible design of the movable hooks allows for customized organization.

Utilizing the Shoe Bench and Shelves

The sturdy wooden bench provides a convenient spot to sit while putting on or taking off shoes. The two slatted shelves below offer ample space to store various types of footwear, keeping your entryway tidy and organized.

Figure 5.2: The shoe bench and shelves provide practical storage and seating.

6. Maintenance and Care

To maintain the appearance and longevity of your hall tree:

• Wipe with a dry cloth for general dusting.
• For more thorough cleaning, wipe with a damp cloth and immediately dry with a clean, soft cloth.
• Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
• Periodically check all screws and connections to ensure they remain tight.

7. Troubleshooting

• Unit feels wobbly: Ensure all screws are fully tightened. Verify that the adjustable feet are properly leveled on the floor. Confirm the anti-tip kit is securely installed to the wall.
• Hooks are not sliding smoothly: Check for any debris in the hook grooves. Ensure the hooks are correctly oriented on the wooden boards.
• Missing parts: Refer to the 'Included Components' section. If any parts are missing, please contact Yaheetech customer support for assistance.

8. Specifications

Figure 8.1: Product dimensions and maximum weight capacities.

9. Warranty and Support

Yaheetech is committed to providing high-quality products and customer satisfaction. For any questions, concerns, or warranty inquiries regarding your Coat Rack Hall Tree, please visit the official Yaheetech website or contact their customer support directly. Please have your model number (YT-00108085ht) and purchase information ready when contacting support.

Yaheetech Official Store: Visit Store