Westek 22-inch Plug-in LED Under Cabinet Light Strip (Model: CTRO2-L22W) User Manual

1. Introduction

Thank you for choosing the Westek 22-inch Plug-in LED Under Cabinet Light Strip. This energy-efficient lighting solution is designed to provide bright, warm white illumination for your kitchen or home office. With 700 lumens of light output and convenient remote control operation, it enhances visibility and ambiance under cabinets.

Please read this manual thoroughly before installation and use to ensure proper operation and safety.

Image 1.1: Westek 22-inch White LED Under Cabinet Light Strip. This image displays the full length of the white LED light strip, designed for under-cabinet installation.

2. Safety Information

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when installing and operating electrical products.

• Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to water or moisture.
• Electrical Connection: Ensure the power source is 120 Volts AC. Do not attempt to modify the plug or power cord.
• Installation: Install the light strip securely to prevent it from falling. Do not install near heat sources.
• Maintenance: Disconnect power before cleaning or performing any maintenance.
• Non-Removable LEDs: The LED light source is not replaceable. Do not attempt to open the fixture.

3. Package Contents

Verify that all components are present before beginning installation:

• Westek 22-inch Plug-in LED Under Cabinet Light Strip (1 unit)
• Remote Control (1 unit)
• Mounting Hardware (screws, clips, or adhesive strips, depending on model variation)
• User Manual (this document)

4. Setup and Installation

Follow these steps to install your Westek LED Under Cabinet Light Strip:

1. Plan Placement: Determine the desired location under your cabinet. Ensure it is within reach of a 120V AC power outlet.
2. Clean Surface: Clean the mounting surface thoroughly to ensure proper adhesion if using adhesive strips, or to mark screw locations accurately.
3. Mounting:
   • If using screws and clips: Mark the screw positions, drill pilot holes if necessary, and secure the clips. Snap the light strip into the clips.
   • If using adhesive strips: Peel the backing from the adhesive strips and firmly press the light strip onto the cleaned surface for at least 30 seconds.
4. Connect Power: Plug the power cord into a standard 120V AC electrical outlet.
5. Test Functionality: Use the remote control to turn the light strip on and off to confirm proper installation.

5. Operating Instructions

The Westek LED Under Cabinet Light Strip is operated using the included remote control.

• Power On/Off: Press the ON button to turn the light strip on, and the OFF button to turn it off.
• Brightness Adjustment: The remote control may include buttons to adjust the brightness level. Refer to the remote's specific markings for these functions.
• Remote Range: Ensure the remote control is pointed towards the light strip's receiver for optimal performance.

6. Maintenance

Minimal maintenance is required for your LED light strip.

• Cleaning: Disconnect the light strip from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents.
• LED Longevity: The integrated LED lights are designed for long-term use and do not require replacement.

7. Troubleshooting

If you encounter issues with your light strip, refer to the following common problems and solutions:

• Light does not turn on:
  • Ensure the power cord is securely plugged into a working 120V AC outlet.
  • Check if the remote control battery needs replacement.
  • Verify the remote control is pointed towards the light strip's receiver.
• Remote control not responding:
  • Replace the remote control battery.
  • Ensure there are no obstructions between the remote and the light strip.

If problems persist, contact Westek customer support for assistance.

8. Specifications

9. Warranty and Support

This Westek product comes with a limited warranty. Please refer to the product packaging or the official Westek website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Westek customer service. Visit the official Westek website for contact information: Westek Store on Amazon.