1. Introduction
This manual provides comprehensive instructions for the Nedis 2.4 GHz RF Replacement Remote Control, model TVMTRC5800BK. This remote is specifically designed for use with compatible Nedis TV mounts, offering reliable wireless operation. Please read this manual carefully before using the product to ensure proper function and longevity.
2. Product Overview
Image 2.1: Nedis 2.4 GHz RF Replacement Remote Control. This image displays the black remote control, highlighting its ergonomic design and button layout. Visible buttons include a power button, a 'SET' button, a circular directional pad with an 'OK' button in the center, and two pairs of rectangular buttons labeled '1' and '2', and 'mem1' and 'mem2' respectively.
The Nedis TVMTRC5800BK remote control is a durable, black-finished device made from ABS material. It features a clear button layout for straightforward control of your compatible TV mount. Its compact size and light weight ensure comfortable handling.
3. Setup
3.1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover.
- Insert two (2) AAA 1.5V batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Note: Batteries are not included with the remote control.
3.2. Pairing with TV Mount
This remote control utilizes 2.4 GHz RF technology with a fixed code input, ensuring a stable and constant connection to your compatible Nedis TV mount. Typically, no manual pairing is required as the remote is pre-configured to work with the specified Nedis TV mount models. If the remote does not respond, ensure batteries are correctly installed and the TV mount is powered on.
4. Operating Instructions
The remote control features a user-friendly button layout for controlling your Nedis TV mount. Below is a description of the main functions:
- Power Button: Located at the top left, typically used to turn the TV mount's motor on or off, or to put it into standby mode.
- SET Button: Located at the top right, this button is usually used for entering or confirming settings, such as memory positions.
- Directional Pad (Up, Down, Left, Right): These buttons control the movement of the TV mount. For example, Up/Down might adjust height, while Left/Right might adjust swivel or horizontal position.
- OK Button: Located in the center of the directional pad, this button confirms selections or actions.
- Buttons '1' and '2': These buttons are typically used to select predefined positions or modes for the TV mount.
- 'mem1' and 'mem2' Buttons: These memory buttons allow you to save and recall specific TV mount positions. Consult your TV mount's manual for detailed instructions on setting and recalling memory positions.
5. Compatibility
This Nedis 2.4 GHz RF Replacement Remote Control (TVMTRC5800BK) is specifically designed to be compatible with the following Nedis TV mount models:
- TVCM5830BK
- TVSM5830BK
- TVSM5831BK
- TVSM5840BK
- TVWM5850BK
- TVWM5860BK
- TVWM5880BK
Ensure your TV mount model is listed above for guaranteed compatibility.
6. Maintenance
6.1. Cleaning
To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
6.2. Battery Replacement
Replace the batteries when the remote control's response becomes inconsistent or stops working. Always replace both batteries at the same time with new AAA 1.5V batteries. Do not mix old and new batteries or different types of batteries.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not responding. | Dead or incorrectly inserted batteries. | Check battery polarity and replace with fresh AAA 1.5V batteries. |
| Remote control has short range or intermittent response. | Low battery power; Obstruction between remote and TV mount receiver; Interference from other 2.4 GHz devices. | Replace batteries. Ensure a clear line of sight. Move away from potential sources of interference. |
| TV mount not responding to specific buttons. | Button malfunction; TV mount not in correct mode. | Ensure the TV mount is powered on and in an operational state. Refer to your TV mount's manual for specific button functions and modes. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | NEDIS |
| Model Number | TVMTRC5800BK |
| Color | Black |
| Connectivity Technology | Radio Frequency (RF) 2.4 GHz |
| Compatible Devices | Nedis TV Mounts (specific models listed in Section 5) |
| Special Features | Ergonomic design, Fixed code input |
| Number of Buttons | 22 |
| Controller Type | Button Control |
| Maximum Range | 10 Meters |
| Power Source | 2x AAA 1.5V Batteries (not included) |
| Dimensions (W x H x D) | 42 mm x 145 mm x 18 mm |
| Weight | 120 g |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your original Nedis TV mount or visit the official Nedis website. Keep your purchase receipt as proof of purchase for any warranty claims.
