Shark S7001 Steam & Scrub Mop Instruction Manual

Introduction

The Shark S7001 Steam & Scrub Mop is designed to clean and sanitize sealed hard floors effectively. This manual provides essential information for the safe and optimal use of your appliance.

Figure 1: Shark S7001 Steam & Scrub Mop

Key Features:

• Scrubbing and Sanitizing: Gently scrubs and sanitizes floors simultaneously.
• 3 Steam Modes: Light for quick cleanups, Normal for everyday use, and Deep for stubborn messes.
• LED Headlights: Illuminates hidden debris for thorough cleaning.
• Powerful Performance: Rotating pads and steam provide up to 2x better stuck-on stain removal compared to traditional steam mops.
• Chemical-Free Sanitization: Removes 99.9% of bacteria using only steam.
• Automatic Scrubbing: Mop head with rotating pads ensures effortless cleaning.
• Versatile: Designed for all sealed hard floors including hardwood, marble, tile, and stone.
• Convenient Design: Features swivel steering, upright lock, and a 22-ft power cord.

Important Safety Information

Please read all instructions carefully before using your Shark S7001 Steam & Scrub Mop. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the appliance is unplugged before assembly, disassembly, or maintenance.
• Use only as described in this manual.
• Do not use on unsealed wood floors or floors that are sensitive to heat or moisture.
• Keep the appliance and its cord away from children.
• Never direct steam at people, animals, or electrical outlets.
• Use only distilled or demineralized water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals to the water tank.
• Always allow the appliance to cool down before storing.

What's Included

Your Shark S7001 Steam & Scrub Mop package includes the following components:

• Steam & Scrub Mop Unit
• 4 Dirt Grip Soft Scrub Washable Pads
• Filling Flask

Figure 2: Steam & Scrub Mop, 4 Dirt Grip Soft Scrub washable pads, and filling flask.

Assembly

The Shark S7001 Steam & Scrub Mop requires minimal assembly. Follow these steps to set up your mop:

1. Insert the handle into the main body of the mop until it clicks securely into place.
2. Attach the Dirt Grip Soft Scrub pads to the bottom of the mop head. Ensure they are centered and firmly attached.
3. Wrap the power cord around the cord hooks for organized storage until ready for use.

Figure 3: Overview of Shark S7001 components and features.

Operating Instructions

1. Filling the Water Tank:

• Ensure the mop is unplugged.
• Open the water tank cap.
• Use the provided filling flask to pour distilled or demineralized water into the tank. Do not overfill.
• Close the water tank cap securely.

2. Powering On and Selecting Steam Mode:

• Plug the power cord into a grounded electrical outlet.
• Press the power button to turn on the mop.
• Select your desired steam mode (Light, Normal, or Deep) using the mode selection button. The mop will begin to heat up and produce steam.

Figure 4: The control panel showing Light, Normal, and Deep cleaning modes.

3. Cleaning Your Floors:

• Allow the mop to preheat for approximately 30 seconds until steam is consistently produced.
• Gently guide the mop across your sealed hard floors. The rotating pads will do the scrubbing work.
• For tough stains, select the Deep mode and hold the mop over the area for a few seconds to allow the steam to penetrate.
• The LED headlights will illuminate debris, ensuring no spot is missed.

Figure 5: Rotating microfiber pads radiate steam for powerful and effortless cleaning.

Figure 6: The mop provides up to 2x better stuck-on stain removal compared to traditional steam mops.

Figure 7: Steam eliminates 99.9% of bacteria for a sanitized floor.

Figure 8: Powerful LED headlights reveal hidden debris on your floors.

Official Product Video:

Video 1: An official overview of the Shark Steam & Scrub Mop, demonstrating its features and cleaning capabilities.

Maintenance

1. Cleaning the Dirt Grip Pads:

• After each use, allow the mop to cool down.
• Remove the Dirt Grip pads from the mop head.
• The pads are machine washable. Wash them separately with liquid detergent. Do not use bleach or fabric softeners.
• Tumble dry on a low setting or air dry.

Figure 9: Dirt Grip Soft Scrub washable pads designed for maximum absorption and scrubbing power.

2. Storing the Mop:

• Empty any remaining water from the tank.
• Wrap the power cord neatly around the cord hooks.
• Store the mop in an upright position in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

The Shark S7001 Steam & Scrub Mop comes with a 1 Year Limited Warranty.

For warranty claims, product support, or to purchase replacement parts, please visit the official Shark website or contact their customer service department.

You can find more information and support resources at the Shark Store.