User Guide for Shark models including: Scrubbing, Sanitizing, Steam Mop, S7001

S7001 QSG MP Mv4

S7001 QSG MP Mv4

Please be sure to read the enclosed Shark Owner’s Guide prior to using your unit.

PDF S7001 QSG MP Mv4

Please be sure to read the enclosed Shark Owner's Guide prior to using your unit.

S7001 QSG MP Mv4 - sharkclean.com

Please be sure to read the enclosed Shark Owner’s Guide prior to using your unit. DIRT GRIP PADS ATTACHING THE PADS 1.Place the Dirt Grip pads flat on the floor with the plastic

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text
  • References

File Info : application/pdf, 2 Pages, 1.12MB

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.

STEAM & SCRUB
Scrubbing & Sanitizing Steam Mop

QUICK START GUIDE
ASSEMBLY

WHAT'S INSIDE

A Steam Mop Handle B Steam Mop Body C Dirt Grip® Pads D Filling Flask

A

B

E C

D
1

1. Insert the steam mop handle into the steam mop body until it clicks securely into place.
S7001_QSG_MP_Mv4

FILLING THE WATER TANK
1. To open the water tank, pull the lid down.
2. Use the filling flask to pour water into the tank. Make sure not to exceed the Max Fill Line on the flask. When finished, close the tank lid firmly.

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.

DIRT GRIP® PADS
ATTACHING THE PADS
1. Place the Dirt Grip pads flat on the floor with the plastic rings facing up.
2. Hold the nozzle over the pads. Align the indent on the nozzle's rotating discs with the plastic rings on the pads.

USING THE STEAM MOP
1. Twist the quick-release cord holder to unwrap the power cord completely. Plug into an electrical outlet.
2. To select the steam mode, press the mode button once for LIGHT, twice for NORMAL, or 3 times for DEEP. Once the mode is selected, tilt the handle down to activate the spinning pads.
3. Mop with a forward and backward motion.
4. When finished mopping, press the mode button. The blue settings lights will blink, indicating that the unit is in Standby mode. Once in Standby mode, lift the handle to bring the steam mop back to the upright position and unplug the unit.

1

2

3

4

3. Gently lower the nozzle onto the pads, pressing until the pads are secured.

REMOVING THE PADS
When the pads have cooled completely, remove them by gently pulling them off the discs.

For questions or to register your product, contact us at: 800-798-7398 or visit us online at sharkclean.com @sharkcleaning



References

• Vacuum Cleaners, Steam Mops, Hair Care & Air Purifiers - Shark®