Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your ZINUS Finley Queen Upholstered Platform Bed Frame with Hydraulic Lifting Storage. Please read all instructions carefully before assembly and use to ensure safe and proper operation.
Important Safety Information:
- Do not exceed the maximum weight capacity of 700 lbs.
- Exercise caution when operating the hydraulic lifting mechanism to prevent injury.
- Always follow the assembly instructions precisely to ensure the stability and safety of the bed frame.
- Keep children and pets away from the bed frame during assembly and when operating the lifting mechanism.
Setup and Assembly
The ZINUS Finley bed frame is designed for straightforward assembly. All necessary parts, tools, and instructions are conveniently located within a zippered compartment in the headboard. We recommend two people for assembly, which typically takes under an hour.
Before You Begin:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Verify that all parts listed in the instruction manual are present.
- Ensure you have adequate space for assembly.
Assembly Steps:
Refer to the included pictorial instructions for detailed step-by-step guidance. Key steps generally include:
- Attaching the side rails to the headboard and footboard.
- Installing the center support beam and legs.
- Securing the metal mattress platform to the frame.
- Connecting the hydraulic lifting mechanisms.
Operating the Hydraulic Lifting Storage
The Finley bed frame features a hydraulic mechanism designed to assist in lifting the mattress platform, providing easy access to the under-bed storage area without needing to move the mattress.
To Access Storage:
- Ensure there are no objects on the mattress that could fall off when lifted.
- Locate the lifting handle at the foot of the bed.
- Firmly grasp the handle and gently lift the mattress platform upwards. The hydraulic pistons will assist in raising the platform smoothly.
- Once fully raised, the platform will remain in an open position, allowing access to the storage space.
To Close Storage:
- Ensure all items are safely within the storage compartment and clear of the frame's edges.
- Grasp the lifting handle and gently pull the mattress platform downwards. You may need to apply slight downward pressure to initiate the closing motion against the hydraulic resistance.
- Guide the platform back to its closed position until it rests securely on the frame.
Maintenance
Regular maintenance will help prolong the life and appearance of your ZINUS Finley bed frame.
Upholstery Care:
- Vacuum the upholstered fabric regularly using a soft brush attachment to remove dust and debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub.
- For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Avoid direct sunlight to prevent fading.
Frame Care:
- Periodically check all bolts and screws to ensure they are tight. Re-tighten if necessary.
- Wipe metal components with a soft, damp cloth to remove dust. Avoid abrasive cleaners.
- Ensure the area under the bed is kept clear to prevent obstruction of the lifting mechanism.
Troubleshooting
If you encounter issues with your ZINUS Finley bed frame, refer to the following common problems and solutions:
Issue: Mattress platform is difficult to lift or does not stay up.
- Check Weight: Ensure the mattress weight is within the recommended range for the hydraulic system. Overly heavy mattresses may strain the mechanism.
- Hydraulic Piston Connection: Verify that the hydraulic pistons are securely attached at both ends. Refer to the assembly instructions to confirm correct installation.
- Obstructions: Check for any objects obstructing the movement of the platform or the hydraulic arms.
- Piston Functionality: If the pistons appear stuck or are not providing assistance, they may be faulty. Contact customer support for assistance.
Issue: Bed frame feels unstable or creaks.
- Tighten Fasteners: Re-check and tighten all bolts and screws throughout the frame, especially those connecting the side rails, headboard, and footboard.
- Level Surface: Ensure the bed frame is placed on a flat, level surface. Uneven flooring can cause instability.
- Correct Assembly: Review the assembly instructions to confirm all parts were installed correctly.
If these steps do not resolve the issue, please contact ZINUS customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FPPSTG-13Q |
| Size | Queen |
| Product Dimensions (L x W x H) | 85.8" x 62.6" x 33.7" |
| Special Feature | Hydraulic Lifting Storage |
| Color | Dark Grey |
| Material | Upholstered Fabric (Headboard), Metal (Frame) |
| Weight Capacity | 700 lbs |
| Ground to Item Distance | 10 Inches |
| Mattress Platform Type | Metal Slats (No Box Spring Needed) |
| Slat Spacing | 5.3 to 5.7 inches |
| Assembly Required | Yes |
Warranty Information
The ZINUS Finley Queen Upholstered Platform Bed Frame is backed by a 5-year limited warranty. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.
For detailed terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official ZINUS website.
Customer Support
If you have any questions, require assistance with assembly, or need to report a defective part, please contact ZINUS customer support. Have your model number (FPPSTG-13Q) and proof of purchase ready when contacting support.
You can typically find contact information on the ZINUS website or through the retailer where you purchased the product.
