Introduction
Product Overview
This manual provides essential information for the safe and efficient use of your Nordlux Notti Table Lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.
The Nordlux Notti Table Lamp is designed for indoor use, featuring a modern style with a grey matte finish and a white fabric cable. It uses an E14 bulb (not included) with a maximum wattage of 25W.
Safety Instructions
- General Safety: Always disconnect the lamp from the power supply before cleaning or performing any maintenance.
- Indoor Use Only: This lamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for indoor use only. Do not use in damp or wet environments.
- Electrical Connection: Ensure the power supply voltage matches the lamp's requirements (230V).
- Bulb Type: Use only E14 bulbs with a maximum wattage of 25W. Do not exceed the recommended wattage.
- Cable: The cable cannot be changed. If the cable is damaged, the lamp should not be used and must be replaced by a qualified electrician or the manufacturer.
- Placement: Place the lamp on a stable, flat surface to prevent tipping.
- Children: Keep the lamp out of reach of children and pets.
Package Contents
The Nordlux Notti Table Lamp package typically includes:
- 1 x Nordlux Notti Table Lamp (grey matte finish)
- 1 x Power cable with European plug and in-line switch (150 cm length)
Note: An E14 light bulb is not included and must be purchased separately.
Setup and Installation
- Unpacking: Carefully remove all components from the packaging. Inspect the lamp for any signs of damage.
- Bulb Installation: Unscrew the glass shade from the lamp base. Insert an E14 light bulb (max 25W) into the lamp holder. Screw the glass shade back onto the base securely.
Image: The Nordlux Notti Table Lamp, showcasing its design with a white spherical glass shade and a grey matte metal base. This image represents the lamp's appearance after assembly.
- Placement: Position the lamp on a stable, flat surface in your desired indoor location. Ensure there is adequate space around the lamp for ventilation and to prevent accidental knocking.
- Power Connection: Plug the lamp's power cable into a standard 230V electrical outlet.
Operating Instructions
The Nordlux Notti Table Lamp is operated using the in-line switch located on the power cable.
- Turning On: Locate the switch on the power cable. Press the switch to the 'ON' position to illuminate the lamp.
Image: The Nordlux Notti Table Lamp with its E14 bulb illuminated, casting a warm glow. This demonstrates the lamp in its operational state.
- Turning Off: Press the switch to the 'OFF' position to turn off the lamp.
Note: This lamp is not dimmable.
Maintenance
To ensure the longevity and proper functioning of your Nordlux Notti Table Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the lamp base and glass shade with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids directly on the lamp, as this may damage the finish or electrical components.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it. Unscrew the glass shade, carefully remove the old E14 bulb, and screw in a new E14 bulb (max 25W). Reattach the glass shade securely.
- Inspection: Periodically inspect the power cable and plug for any signs of damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer for assistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp flickers. |
|
|
| Lamp gets too hot. |
|
|
If the problem persists after trying these solutions, please contact Nordlux customer support.
Specifications
| Model Number | 2011035010 |
| Brand | Nordlux |
| Product Type | Table Lamp |
| Color | Grey (matte finish) |
| Material | Metal / Glass |
| Dimensions (L x W x H) | 15 cm x 15 cm x 34.5 cm (approx. 5.9 x 5.9 x 13.6 inches) |
| Shade Diameter | 15 cm (approx. 5.9 inches) |
| Weight | 2.5 kg (approx. 5.5 lbs) |
| Voltage | 230V |
| Bulb Base | E14 |
| Max Wattage | 25W |
| Bulb Included | No |
| Protection Class | Class 2 (Double insulated) |
| IP Rating | IP20 (Indoor use only) |
| Cable Length | 150 cm (approx. 59 inches) |
| Switch Type | In-line switch on cable |
| Dimmable | No |
| Recommended Use | Indoor lighting, living room, bedroom |
Image: A technical diagram illustrating the key dimensions of the Nordlux Notti Table Lamp, including its height, shade diameter, and cable length.
Warranty and Support
Nordlux products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Nordlux website.
For technical support, spare parts, or any questions not covered in this manual, please contact Nordlux customer service directly.
