Nordlux Ellen 211230 Table Lamp
Model: 211230
Assembly Instructions
Follow these steps to assemble your Nordlux Ellen table lamp:
Step 1: Base and Stem Assembly
The diagram shows a base unit and a long pole (stem). The pole is being inserted or screwed into the base.
Step 2: Lamp Head and Cord Connection
The diagram shows the pole with the lamp head attached, and the power cord is visible. It highlights the bulb socket.
Step 3: Bulb Installation
A close-up shows a light bulb being screwed into the socket. Ensure the bulb is screwed in securely.
Step 4: Final Assembly
The complete lamp is shown, standing upright. The lamp is now assembled. Place it in your desired location.
Important Information
Glass Care
Mouth-blown glass should always be cleaned when cold. Use a soft, dry cloth for dusting. For grease stains or similar, use a soft cloth wrung in lukewarm water (below 50°C) with a mild detergent. Never use detergents containing abrasive or solvent materials. Only switch on the lamp after all water has evaporated.
Note: Mouth-blown glass is formed manually, which may result in natural variations like air bubbles or slight differences in thickness. These are considered part of the glass's unique character and organic look.
Electrical Safety
Class II / Double Insulation: The lamp is double-insulated and does not require connection to the installation's earth wire (yellow/green). This provides enhanced safety.
IP Rating
IP20: This lamp is suitable for indoor use in dry areas. It should only be installed in areas where direct contact with water cannot occur.
Z-Connection
The lamp features a Z-connection, meaning the connecting wire cannot be replaced. If the wire is damaged, the lamp must be discarded.
Wattage Limit
Do not exceed the maximum specified wattage for the bulb. The lamp is designed for bulbs up to 40W.
Mounting Instructions
Please keep these mounting instructions for future reference.
Disposal of Electrical and Electronic Equipment (WEEE)
This symbol ♻️ (crossed-out wheelie bin) indicates that this product must not be disposed of with regular household waste. Electrical and electronic equipment contain substances that can be harmful to human health and the environment if not recycled correctly. It is your responsibility to hand over this product to a designated collection point for recycling. By doing so, you help prevent these products from straining nature and the environment unnecessarily and protect human health. For more information, contact your local municipality, waste disposal service, or the retailer where you purchased the product.
