Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your allen + roth Lynnpark 1-Light Black Modern/Contemporary Vanity Light Bar. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not install this fixture in wet locations. It is designed for indoor use in dry or damp locations (e.g., bathrooms).
- Handle the fixture with care. Avoid dropping or striking it.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
Package Contents
Verify that all components are present before installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Vanity Light Fixture (1)
- Mounting Hardware Kit (1) - Typically includes mounting bracket, screws, wire nuts.
- Instruction Manual (1)
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
Setup and Installation
- Turn Off Power: Before starting installation, ensure the power to the circuit is turned off at the main circuit breaker or fuse box.
- Prepare Mounting Surface: Remove any existing fixture and its mounting hardware. Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Bracket: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level.
- Make Electrical Connections: Carefully connect the fixture's wires to the corresponding wires from the junction box using wire nuts. Connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire (bare copper or green) to the house ground wire. Secure connections with electrical tape.
- Mount the Fixture: Align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: Side view of the allen + roth Lynnpark 1-Light Black Modern/Contemporary Vanity Light Bar, showing its sleek design and frosted acrylic shade.
Operating Instructions
This vanity light bar features an integrated LED light source and is designed for simple operation.
- Turning On/Off: Operate the light using a standard wall switch connected to the fixture's circuit.
- Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED-rated dimmer switch installed. Follow the dimmer switch manufacturer's instructions for proper operation.
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic shade.
- LED Light Source: The Lynnpark vanity light uses an integrated LED light source designed for long-term performance. The LEDs are not replaceable. If the LED light source fails, the entire fixture may need to be replaced.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty switch. | Check circuit breaker. Ensure all wire connections are secure. Test the wall switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch; loose wiring. | Ensure a compatible LED-rated dimmer switch is used. Check wire connections. |
| Fixture hums. | Incompatible dimmer switch. | Replace with a high-quality LED-compatible dimmer switch. |
Specifications
| Feature | Detail |
|---|---|
| Brand | allen + roth |
| Model Number | VBL11-27MBK |
| Color | Black |
| Material | Acrylic |
| Style | Modern/Contemporary |
| Light Fixture Form | Vanity |
| Room Type | Bathroom |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Special Feature | Dimmable |
| Light Source Type | LED (Integrated) |
| Finish Type | Brushed Nickel, Matte Black |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Wattage | 17 watts |
| Item Weight | 4.19 pounds |
| Package Dimensions | 28.27 x 7.48 x 6.46 inches |
| Assembly Required | Yes |
| UPC | 080629706088 |
Warranty Information
For specific warranty details, please refer to the original purchase documentation or contact the retailer/manufacturer directly. Warranty periods and terms may vary.
Customer Support
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact allen + roth customer service. Refer to your purchase receipt or the product packaging for contact information.
