Victor M241 Indoor Electronic Rat and Mouse Trap Instruction Manual

Product Overview

The Victor M241 Electronic Rat and Mouse Trap is designed for effective rodent control indoors. It delivers a high-voltage shock to humanely eliminate rodents. The trap features a removable kill chamber for no-touch disposal and an LED indicator for status alerts.

Key Features:

• Humane High-Voltage Shock: Delivers a quick, high-voltage shock upon rodent entry.
• No-Touch Disposal: Removable lid allows for easy and hygienic disposal of rodents.
• LED Alerts: A green LED light indicates a catch, while a red light signals low battery.
• Built-in Bait Cup: Conveniently located bait cup for easy bait application.
• Easy to Use: Simple setup with batteries and bait.
• Indoor Use: Designed for placement along walls in indoor areas with rodent activity.

Setup Instructions

1. Insert Batteries:

   Open the battery compartment located on the underside of the trap. Insert four (4) "AA" batteries, ensuring correct polarity. Close the battery compartment securely.

   

   Image: A hand inserting four AA batteries into the battery compartment of the trap.
2. Apply Bait:

   Open the removable lid of the trap. Place a small amount of high-protein bait (e.g., peanut butter, hazelnut spread) into the designated bait cup at the back of the trap. Avoid getting bait on the metal plates to ensure proper operation.

   

   Image: A hand applying bait into the bait cup located inside the trap.
3. Close Trap and Power On:

   Close the trap lid securely. Locate the ON/OFF switch on the top of the trap and slide it to the "ON" position. A green LED light will blink once to indicate the trap is active and the batteries are good.

4. Placement:

   Place the trap along a wall in areas where rodent activity has been observed. Rodents tend to travel along walls. Ensure the trap entrance is facing the wall.

   

   Image: Two black Victor M241 electronic traps positioned against a white wall.

Operating Instructions

Rodent Detection and Elimination:

The trap's smart circuit technology detects when a rodent enters and steps on the electrified plates. A high-voltage shock is then delivered for two minutes to ensure effective elimination.

LED Indicators:

• Green Light (Blinking): Indicates a successful catch.
• Red Light (Blinking): Indicates low battery power. Replace batteries promptly.

Disposal of Rodents:

1. When a green light blinks, indicating a catch, slide the ON/OFF switch to "OFF".
2. Remove the lid of the trap.
3. Tilt the trap over a waste bin to release the rodent without direct contact.
4. Close the lid and reset the trap by sliding the ON/OFF switch to "ON".

Image: An illustration depicting the hygienic, no-touch disposal method for rodents caught in the trap.

Maintenance

Regular cleaning ensures optimal performance and longevity of your Victor M241 trap.

1. Power Off: Always switch the trap to the "OFF" position and remove batteries before cleaning.
2. Clean the Kill Chamber: The removable kill chamber allows for easy access. Use warm water and a soft brush or cloth to clean the metal plates and interior. Hydrogen peroxide solution can be used for thorough cleaning. Do not get water on the electronic components.
3. Dry Thoroughly: Allow all parts of the trap to air dry completely before reassembling and reinserting batteries.
4. Re-bait: Re-apply fresh bait as needed.

Troubleshooting

Specifications

• Brand: Victor
• Model: M241
• Color: Black
• Power Source: 4 x AA Batteries (not included)
• Dimensions: 8.75 x 3.54 x 4.25 inches
• Item Weight: 2.48 pounds
• Target Species: Rat, Mouse
• Usage: Indoor

Official Product Videos

Warranty and Support

Specific warranty details and direct support contact information are not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for the most current warranty terms and customer support options.

For additional information, you may visit the Victor Store on Amazon.