User Manual

Introduction

This manual provides comprehensive instructions for the operation, setup, and maintenance of your Fila Unisex Adult Digital Quartz Watch, model FILA38-826-004. Please read this manual carefully to ensure proper use and longevity of your timepiece.

Product Overview

The Fila FILA38-826-004 is a robust digital quartz watch designed for unisex adult use, featuring a durable PU strap and a clear digital display. It includes various functions such as time display, date, and stopwatch capabilities.

Figure 1: Front view of the Fila digital watch, showing the digital display with time, day, and seconds, along with various buttons and markings on the bezel. The watch has a grey case and strap with blue accents on the dial.

Figure 2: Another front view of the Fila digital watch, displaying a different time and day. This image highlights the textured bezel and the arrangement of the control buttons around the watch face.

Figure 3: Rear view of the Fila digital watch, focusing on the stainless steel case back which is engraved with the Fila logo and other product information. The grey PU strap is also visible, showing its texture and attachment to the watch case.

Figure 4: Side profile view of the Fila digital watch, illustrating the thickness of the watch case and the design of the buttons. The textured grey PU strap extends from the watch, showing its flexibility and buckle mechanism.

Setup

Your Fila watch comes with a pre-installed battery. Before first use, ensure any protective films are removed from the watch face and case back.

Initial Time Setting

1. Press the MODE button (typically bottom-left) repeatedly until the time setting mode is displayed. This is usually indicated by flashing digits.
2. Use the RESET button (typically top-left) to select the digit or setting you wish to adjust (e.g., hours, minutes, 12/24-hour format).
3. Use the ST/STP button (typically top-right) to increase the value of the flashing digit. Hold to rapidly advance.
4. Once all settings are correct, press the MODE button again to exit the setting mode and return to the normal time display.

Operating Instructions

Navigating Modes

Press the MODE button to cycle through the different functions of the watch. Typical modes include:

• Time Display (Hour, Minute, Second, Day, Date)
• Alarm Setting
• Stopwatch
• Timer (if applicable)

Using the Stopwatch

1. Press MODE until the stopwatch display appears (usually 00:00:00).
2. Press ST/STP to start the stopwatch.
3. Press ST/STP again to pause/resume the stopwatch.
4. Press RESET while the stopwatch is paused to reset it to zero.

Setting the Alarm

1. Press MODE until the alarm setting mode is displayed.
2. Use RESET to select the hour or minute digit to adjust.
3. Use ST/STP to change the value.
4. Press MODE to confirm and exit.
5. To turn the alarm on/off, typically press RESET while in the alarm display mode. An alarm icon will appear/disappear.

Using the Backlight

Press the LIGHT button (typically bottom-right) to illuminate the display for a few seconds, allowing visibility in low-light conditions.

Water Resistance

This watch is water resistant to 100 meters (10 ATM). This means it is suitable for swimming and snorkeling, but not for high-impact water sports or diving. Do not operate buttons while the watch is submerged in water.

Maintenance

• Cleaning: Wipe the watch case and strap regularly with a soft, damp cloth. Avoid using chemical cleaners or abrasive materials.
• Battery Replacement: The watch uses 1 Lithium Metal battery (included). When the display dims or functions become erratic, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure water resistance is maintained.
• Storage: When not in use for extended periods, store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Shocks: While durable, avoid strong impacts or dropping the watch, as this can damage internal components.

Troubleshooting

Specifications

• Model Number: FILA38-826-004
• Movement: Quartz
• Case Material: Plastic
• Strap Material: PU (Polyurethane)
• Case Diameter: 53mm
• Water Resistance: 100m (10 ATM)
• Battery Type: 1 Lithium Metal battery (included)
• Product Dimensions: 25 x 4 x 2 cm
• Weight: 150 g

Warranty and Support

For information regarding warranty coverage and customer support, please refer to the warranty card included with your purchase or visit the official Fila website. You can also visit the Fila Store on Amazon for additional product information and contact options.

Please retain your proof of purchase for any warranty claims.