Important Safety Information
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the bed on a soft, clean surface to prevent scratching.
- Do not overtighten bolts during assembly. Tighten securely but avoid stripping threads.
- Periodically check all connections and re-tighten as necessary to maintain stability.
- This bed frame is designed for use with a mattress. Do not stand or jump on the bed frame.
- Maximum weight capacity: 700 lbs (approximately 317 kg). Do not exceed this limit.
- Keep small parts away from children during assembly to prevent choking hazards.
Package Contents
Verify that all components listed below are included in your package. Refer to the diagram for visual identification.
Image: Exploded view of the Zinus Therese bed frame components, showing the headboard, footboard, side rails, center support, and slats separated for assembly.
- Headboard (1)
- Footboard (1)
- Side Rails (2)
- Center Support Beam (1)
- Wood Slats (Multiple)
- Hardware Pack (Bolts, Washers, Allen Wrench/Ratchet Tool)
Setup Instructions
Follow these steps for proper assembly of your Zinus Therese Platform Bed.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Identify each component using the "Package Contents" section.
- Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Insert the appropriate bolts and washers, then hand-tighten.
- Attach Side Rails to Footboard: Repeat the previous step to attach the other end of the side rails to the footboard. Ensure all connections are secure but do not fully tighten yet.
- Install Center Support Beam: Connect the center support beam to the designated brackets on the headboard and footboard. Secure with bolts and washers.
- Tighten All Bolts: Once the main frame is assembled, use the provided ratchet tool to fully tighten all bolts. Ensure all connections are firm and stable.
- Place Wood Slats: Unroll or place the wood slats across the side rails. The slats are designed with non-slip tape to prevent mattress movement and foam padded tape for noise reduction. Ensure they are evenly spaced and secured if applicable.
Image: Detailed view of bed frame assembly, illustrating how bolts connect the frame components and showing the support leg structure.
Image: The Zinus Therese bed frame without a mattress, clearly displaying the wood slat support system designed for mattress stability.
Operating Instructions
Once assembled, your Zinus Therese Platform Bed is ready for use.
- Mattress Placement: Carefully place your mattress directly onto the wood slats. No box spring is required for this platform bed.
- Noise Reduction: The bed frame features foam padded tape on the steel frame and non-slip tape on the wooden slats. These features are designed to minimize noise and prevent mattress movement.
- Weight Distribution: Ensure weight is distributed evenly across the bed surface to maintain structural integrity and prevent damage.
Image: A fully assembled Zinus Therese Queen size platform bed with a mattress and bedding, showcasing its functional design.
Maintenance
Regular maintenance will help prolong the life and performance of your bed frame.
- Bolt Check: Periodically (e.g., every 3-6 months), check all assembly bolts and re-tighten them if they have loosened. This helps prevent squeaking and maintains stability.
- Cleaning Metal Parts: Wipe metal surfaces with a soft, damp cloth. Avoid abrasive cleaners that may damage the finish.
- Cleaning Wood Parts: Wipe wood surfaces with a soft, dry, or slightly damp cloth. Avoid excessive moisture.
- Inspection: Inspect the wood slats for any signs of wear or damage. Replace if necessary.
Troubleshooting
Common issues and their solutions.
- Squeaking Noises:
- Ensure all bolts are securely tightened. Loose connections are a common cause of squeaking.
- Verify that the foam padded tape on the steel frame is intact and properly positioned.
- Check if the mattress is rubbing against the frame. Adjust its position if needed.
- Mattress Sliding:
- Confirm that the non-slip tape on the wooden slats is present and making contact with the mattress.
- Consider adding additional non-slip pads between the mattress and slats if sliding persists.
- Missing or Damaged Parts:
- If you find any parts missing or damaged upon opening the package, do not proceed with assembly.
- Contact Zinus customer support immediately for assistance and replacement parts.
Specifications
Detailed specifications for the Zinus Therese Metal and Wood Platform Bed (Queen).
Image: Diagram illustrating the dimensions (length 82", width 61.5", headboard height 32", frame height 8") and weight capacity (700 lbs) of the Zinus Therese Queen bed frame.
Image: Diagram illustrating the dimensions (length 208.28 cm, width 156.21 cm, height 81.28 cm) of the Zinus Therese Queen bed frame.
| Feature | Detail |
|---|---|
| Brand | Zinus |
| Model Number | OLB-RPPBC-14Q |
| Size | Queen |
| Material | Alloy Steel, Wood |
| Color | Brown (Wood), Black (Metal) |
| Product Dimensions (L x W x H) | 203.2 x 151.13 x 81.03 cm (80 x 59.5 x 31.9 inches) |
| Item Weight | 31.29 kg (69 lbs) |
| Minimum Weight Recommendation | 113.4 kg (250 lbs) |
| Maximum Weight Capacity | 700 lbs (approx. 317 kg) |
| Special Features | Squeak Resistant (Foam padded tape), Non-slip tape on slats |
| Included Components | Frame, Wood Slats, Assembly Hardware |
Warranty and Support
Zinus provides a limited warranty for its products. For specific warranty details, claims, or technical support, please refer to the official Zinus website or contact their customer service directly.
Zinus Customer Support:
- Visit the official Zinus website for FAQs and contact information.
- Have your model number (OLB-RPPBC-14Q) and purchase information ready when contacting support.
