Active Era Digital Body Weight Scale (Model BS-01) Instruction Manual

Introduction

Thank you for choosing the Active Era Digital Body Weight Scale, Model BS-01. This manual provides essential information for the proper setup, operation, and maintenance of your new scale. Please read these instructions carefully before use to ensure accurate readings and prolong the life of your device.

Image: The Active Era Digital Body Weight Scale, Model BS-01, shown with two AAA batteries, highlighting its sleek design and readiness for use.

Setup

1. Battery Installation: The scale requires 2 x AAA batteries (included). Open the battery compartment on the underside of the scale and insert the batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Placement: Place the scale on a hard, flat, and stable surface. Uneven or soft surfaces (like carpet) can affect accuracy.
3. Initial Calibration: For first-time use or after moving the scale, gently step on the platform until the display shows numbers, then step off. The display will show '0.0' or '0.00' indicating it is calibrated and ready for use.
4. Unit Selection: On the underside of the scale, locate the unit conversion button. Press this button to cycle through the available units: pounds (lb), kilograms (kg), or stone (st). Select your desired unit before weighing.

Image: A visual representation of the three different measurement units (kg, lb, st) available on the scale, allowing users to track weight in their preferred format.

Operating Instructions

1. Step-On Technology: The scale features innovative step-on technology. Simply step directly onto the scale platform. The scale will automatically turn on and display your weight.
2. Reading the Display: Stand still on the scale. Your weight will be displayed on the backlit LCD screen. The display will flash a few times to indicate a stable reading, then lock the final weight.
3. Automatic Shut-Off: The scale will automatically turn off after a few seconds of inactivity to conserve battery life.

Image: A foot stepping onto the scale, illustrating the automatic step-on technology that activates the scale and displays weight instantly. Anti-slip pads are visible for safety.

Maintenance

• Cleaning: The tempered glass surface is easy to clean. Wipe the scale with a damp cloth and a mild detergent if necessary. Avoid abrasive cleaners or submerging the scale in water.
• Battery Replacement: When the display shows 'Lo', it indicates low battery. Replace both AAA batteries promptly to ensure continued accurate operation.
• Storage: Store the scale in a cool, dry place. Its slim design allows for easy storage under furniture or in cabinets.

Image: The Active Era Digital Body Weight Scale neatly stored within a bathroom cabinet drawer, demonstrating its slim profile and ease of storage in tight spaces.

Troubleshooting

• "Lo" Display: Indicates low battery. Replace the batteries.
• "Err" Display: Indicates overload. The scale's maximum capacity is 180kg / 400lb. Remove weight immediately to prevent damage.
• Inaccurate Readings:
  • Ensure the scale is on a hard, flat, and stable surface.
  • Perform initial calibration by stepping on and off the scale.
  • Ensure you are standing still and centered on the scale.
  • Check for any obstructions under the scale.
• No Display: Check battery installation and ensure batteries are not depleted.

Specifications

Image: A diagram illustrating the compact 11-inch by 11-inch dimensions of the Active Era Digital Body Weight Scale, highlighting its square form factor.

Warranty and Support

Active Era products are designed for reliability and performance. For any questions, technical support, or warranty claims, please refer to the contact information provided with your purchase or visit the official Active Era website. Please retain your proof of purchase for warranty purposes.