Important Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to follow these instructions may result in electric shock, fire, or other injuries that can be hazardous or even fatal.
- Always disconnect power at the main circuit breaker before beginning installation.
- Consult a qualified electrician if you have any electrical questions.
- All wiring connections must be in accordance with local and national electrical codes.
- Ensure all connections are secure and properly insulated.
- This fixture is designed for indoor use only.
Setup and Installation
This section provides step-by-step instructions for the proper installation of your vanity light fixture.
Tools Required (Not Included):
- Phillips screwdriver
- Flathead screwdriver
- Wire strippers
- Electrical tape
- Safety glasses
Package Contents:
- Fixture body (A)
- Glass shades (B) - 3 pieces
- Mounting hardware kit (C)
Figure 1: The allen + roth 3-Light Merington Aged Bronze Standard Bathroom Vanity Light. This image displays the fixture's dark bronze finish bar with three cylindrical frosted glass shades, designed for wall mounting.
Installation Steps:
- Turn off Power: Locate the circuit breaker that supplies power to the light fixture outlet box. Turn the breaker to the OFF position.
- Prepare Mounting: Attach the mounting bracket (from kit C) to the electrical outlet box using the provided screws. Ensure the bracket is securely fastened.
- Wire Connections:
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
- Connect the black wire from the fixture to the black (hot) wire from the outlet box.
- Secure all wire connections with wire nuts and wrap with electrical tape for added safety.
- Mount Fixture: Carefully align the fixture body (A) with the mounting bracket and secure it using the decorative nuts or screws provided.
- Install Shades and Bulbs:
- Screw in the appropriate light bulbs (not included, E26 base, max 60W incandescent or equivalent LED) into the sockets.
- Attach the glass shades (B) to the fixture by screwing them onto the socket rings or securing them as per the design.
- Restore Power: Turn the circuit breaker back to the ON position.
Operating Instructions
The allen + roth Merington Vanity Light is designed for simple operation.
- Power On/Off: Operate the light fixture using the standard wall switch connected to the circuit.
- Dimmable Feature: This fixture is dimmable. To utilize this feature, ensure you have installed dimmable bulbs and connected the fixture to a compatible dimmer switch (sold separately).
- Light Source: Uses three E26 base bulbs. For optimal performance and energy efficiency, consider using LED bulbs.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your vanity light.
- Cleaning:
- Always turn off power before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Clean glass shades with a mild glass cleaner and a soft cloth.
- Bulb Replacement:
- Ensure power is off and bulbs are cool before replacing.
- Unscrew old bulbs and screw in new E26 base bulbs (max 60W incandescent or equivalent LED).
Troubleshooting
If you encounter issues with your vanity light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Fixture hums. |
|
|
If the problem persists after attempting these solutions, consult a qualified electrician.
Product Specifications
| Brand | allen + roth |
| Model Number | VBS271-3NABZ |
| Fixture Type | Vanity Light |
| Finish | Aged Bronze |
| Material | Bronze |
| Number of Lights | 3 |
| Bulb Base | E26 |
| Max Wattage per Bulb | 60 Watts (Incandescent) |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible bulbs and dimmer switch) |
| Installation Type | Flush Mount, Wall Mount |
| Power Source | Hardwired |
| Product Dimensions | 21.5 x 5 x 9 inches (Length x Width x Height) |
| Item Weight | 6.19 pounds |
| Indoor/Outdoor Usage | Indoor |
Warranty Information
Specific warranty details for the allen + roth 3-Light Merington Aged Bronze Standard Bathroom Vanity Light are typically provided with the product packaging or can be obtained from the retailer or manufacturer's website. Generally, lighting fixtures come with a limited warranty covering defects in materials and workmanship for a period of one year from the date of purchase. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official allen + roth website.
Customer Support
If you have any questions regarding the installation, operation, or maintenance of your allen + roth Merington Vanity Light, please contact customer support.
For assistance, please refer to the contact information provided on your purchase receipt or the manufacturer's official website. You may also visit the allen + roth brand page on Amazon for more information.
