Ergotron LearnFit Mobile Standing Desk (Model 24-547-003) Instruction Manual

Introduction

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your Ergotron LearnFit Mobile Standing Desk. Please read this manual thoroughly before using the product to ensure safe and efficient operation. This desk is designed to offer flexible and ergonomic workspace solutions in various settings.

Figure 1: Ergotron LearnFit Mobile Standing Desk

Important Safety Information

• Always secure the desk with the caster locks when in use to prevent unintended movement.
• Exercise caution when moving the desk to prevent tip-overs, especially on uneven surfaces.
• Assemble the desk carefully, strictly following the provided instructions.
• Avoid exposing the desk to excessive moisture or harsh cleaning agents. Use a damp cloth for cleaning.
• Do not place objects exceeding the maximum weight capacity of 15 pounds (6.8 kg) on the desk.

Setup and Assembly

The Ergotron LearnFit Mobile Standing Desk is designed for quick and tool-free assembly, typically taking less than one minute. Follow the steps below for proper setup.

Assembly Steps:

1. Attach the Column to the Base: Align the desk column with the central opening on the wheeled base. Gently lower the column until it securely clicks into place.
2. Attach the Worksurface: Position the worksurface onto the top of the column. Ensure it is properly aligned and push down firmly until it locks into position. A secure connection is indicated by the absence of wobble.
3. Verify Stability: Once assembled, gently test the desk for stability. Ensure all connections are firm.

Figure 2: Assembly Diagram

Visual Assembly Guide:

Operating Instructions

Height Adjustment:

The LearnFit desk features on-demand height adjustment, allowing seamless transitions between sitting and standing positions. The ergonomic mechanism provides 16 inches of lift, smoothly adjusting from a minimum height of 29 inches (74 cm) to a maximum height of 45 inches (114 cm).

1. To Lower: Locate the height adjustment lever on the side of the desk column. Press and hold the lever while gently pushing down on the worksurface to achieve the desired sitting height.
2. To Raise: Press and hold the height adjustment lever while allowing the worksurface to rise to your preferred standing height. Release the lever to lock the desk in place.

Figure 3: Adjusting Desk Height

Mobility and Caster Locks:

The desk is equipped with premium dual-wheel casters for smooth movement across various floor types. For stability, the front two casters include locking mechanisms.

• To Move: Ensure the caster locks are disengaged. Gently push the desk to relocate it. The oversized casters facilitate movement over hallway thresholds.
• To Lock: Once the desk is in the desired position, press down on the levers located on the front two casters until they click into the locked position. This prevents the desk from rolling.
• To Unlock: Lift the levers on the front two casters to disengage the locks.

Figure 4: Caster Locks and Desk Dimensions

Worksurface Features:

The 24 x 22-inch (61 x 56 cm) worksurface provides ample space for a laptop, notebook, and other essentials. Integrated features help maintain an organized workspace.

• Cup Holder: A dedicated cup holder keeps beverages secure and within reach.
• Tablet Slot: A slot is provided for holding tablets or smartphones upright for easy viewing.
• Pencil Tray: A recessed area serves as a convenient tray for pens, pencils, and small accessories.
• Backpack Hook: A hook on the side of the column allows for hanging a backpack or bag, keeping it off the floor.

Figure 5: Worksurface Features and Accessories

Maintenance

To ensure the longevity and optimal performance of your Ergotron LearnFit Mobile Standing Desk, follow these simple maintenance guidelines:

• Cleaning: Wipe the desk surfaces with a damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
• Inspection: Periodically check all connections and moving parts to ensure they are secure and functioning correctly.
• Weight Capacity: Adhere strictly to the maximum weight recommendation of 15 pounds (6.8 kg) to prevent damage to the desk's height adjustment mechanism.

Troubleshooting

Should you encounter any issues with your LearnFit Mobile Standing Desk, please refer to the following common solutions:

• Desk Wobbles After Assembly: Ensure the worksurface is firmly pushed down onto the column until it locks securely. Verify that the column is also fully seated in the base.
• Difficulty Adjusting Height: Check that the height adjustment lever is fully engaged when attempting to raise or lower the desk. Ensure no objects are obstructing the column's movement. Do not exceed the 15-pound weight capacity.
• Desk Rolls When Locked: Confirm that the levers on the front two casters are fully pressed down into the locked position.

If problems persist, please contact Ergotron customer support for further assistance.

Specifications

Warranty Information

The Ergotron LearnFit Mobile Standing Desk is backed by a 10-year warranty. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official Ergotron website or contact customer support.

Customer Support

For technical assistance, warranty claims, or any questions regarding your Ergotron LearnFit Mobile Standing Desk, please visit the official Ergotron website or contact their customer support team. Contact details can typically be found on the product packaging or the manufacturer's website.

Online Resources: www.ergotron.com