Winco 202-WP

Winco Water Pan 202-WP Instruction Manual

Model: 202-WP

Introduction

This manual provides essential instructions for the safe and effective use of your Winco Water Pan, model 202-WP. Please read this manual thoroughly before initial use and retain it for future reference. This water pan is designed for use in professional and home kitchen environments, specifically with compatible chafing dishes or food warmers.

Safety Information

Setup

The Winco Water Pan 202-WP is designed for straightforward integration into compatible chafing dish setups. No assembly is required for the water pan itself.

  1. Unpacking: Carefully remove the water pan from its packaging. Inspect for any signs of damage during transit.
  2. Initial Cleaning: Before first use, wash the water pan thoroughly with warm, soapy water. Rinse completely and dry.
  3. Placement: Position the water pan securely within the frame of your compatible chafing dish or food warmer. Ensure it sits level and stable.
  4. Filling: Fill the water pan with the appropriate amount of hot water. Refer to your chafing dish or warmer's instructions for recommended water levels. Do not fill above the maximum fill line, if present.
Winco Water Pan 202-WP placed inside a chafing dish frame

Image: The Winco Water Pan 202-WP, an oval stainless steel pan, shown ready for use.

Operating Instructions

The water pan serves as a heat reservoir to keep food warm. Its operation is dependent on the heat source and food pan used in conjunction with it.

  1. Heat Source Activation: Activate your chafing dish's heat source (e.g., sternos, electric heating element) according to its specific instructions.
  2. Monitoring Water Level: Periodically check the water level in the pan during use. If water evaporates, carefully add more hot water to maintain the desired temperature.
  3. Food Pan Placement: Once the water in the pan is heated, place your food pan (containing prepared food) directly into the water pan.
  4. Temperature Maintenance: The hot water will gently heat the food pan, keeping the food warm without direct flame contact.
  5. After Use: After service, allow the water pan and its contents to cool down before handling.

Maintenance and Care

Proper care will extend the life and maintain the appearance of your Winco Water Pan.

Troubleshooting

Problem Possible Cause Solution
Food not staying warm Insufficient water level; heat source too low or extinguished; pan not preheated. Check and replenish water level; ensure heat source is active and adequate; allow water to heat fully before adding food pan.
Water spots or discoloration on pan Hard water deposits; improper drying after washing. Clean with a stainless steel cleaner; dry immediately after washing.
Pan appears warped Sudden temperature changes (e.g., cold water into hot pan); excessive heat. Allow pan to cool gradually; avoid extreme temperature shocks.

Specifications

Warranty and Support

Winco products are manufactured to high standards. For specific warranty information, please refer to the official Winco website or contact Winco customer service directly. This manual does not constitute a warranty.

For technical support, replacement parts, or further inquiries, please contact Winco customer service:

Related Documents - 202-WP

Preview WINCO W6010DE/J Generator Parts List and Diagrams
Comprehensive parts list and assembly diagrams for the WINCO W6010DE/J portable generator. Includes detailed breakdowns of the engine, generator end, cradle assembly, fuel system, electrical receptacles, and decals, with part numbers and quantities.
Preview Winco TDAC-8W/TDAC-8K Paper Towel Dispenser Instructions
This document provides instructions for mounting, filling, and locking the Winco TDAC-8W and TDAC-8K paper towel dispensers.
Preview Winco SCAL-D22 Digital Portion Scale Operating Instructions
Operating instructions and specifications for the Winco SCAL-D22 digital portion scale, including care, usage, functions, and safety information.
Preview WINCO MD100/MD125/MD190 Owners Manual
Comprehensive owners manual for WINCO MD100, MD125, and MD190 mobile power systems. Covers operation, preparation, maintenance, troubleshooting, and specifications for reliable power generation.
Preview WINCO Generator Assembly, Operation, and Service Manual
Comprehensive manual for WINCO generators, covering assembly instructions, operating procedures, service information, maintenance, troubleshooting, and specifications for various models including 108BH-IM, 4BH-F, 305WS, and 5WS.
Preview Winco 18" Pizza/Pretzel Warmer Model 51018 - Operating Manual and Specifications
Comprehensive operating manual, safety instructions, parts list, and wiring diagram for the Winco 18" Pizza/Pretzel Warmer, Model 51018. Learn how to safely operate, maintain, and assemble your commercial food warmer.