DigiTech FS3X Three-Function Foot Switch User Manual

Introduction

The DigiTech FS3X is a versatile three-function foot switch designed to enhance the control of various DigiTech FX pedals, looper pedals like the JamMan, and other compatible devices. It provides hands-free operation for a more dynamic performance experience, allowing musicians to switch functions without interrupting their playing.

Features

• Hands-free control of DigiTech FX Pedals with a Footswitch output.
• Loop selection and Auto Record for the JamMan looper series.
• Control functions of the Hendrix Experience and Expression Factory Pedals.
• Durable 3-button metal chassis construction for reliability.

Setup

The FS3X connects to your compatible DigiTech device using a standard 1/4-inch TRS (Tip-Ring-Sleeve) cable. A 10-foot TRS male-to-male cable is typically included with the unit.

1. Locate the footswitch input jack on your DigiTech pedal or amplifier. This is usually labeled 'FS3X', 'Footswitch', or similar.
2. Connect one end of the 1/4-inch TRS cable to the output jack on the FS3X.
3. Connect the other end of the TRS cable to the footswitch input on your DigiTech device.
4. Ensure both the FS3X and your DigiTech device are securely connected. The FS3X does not require an external power supply or batteries, drawing power directly from the connected device if needed, or operating passively.

Operating Instructions

The FS3X features three momentary-style footswitches: 'Mode', 'Up', and 'Down'. The specific functions of these buttons depend on the DigiTech product it is connected to. Refer to your primary device's manual for detailed configuration and functionality.

General Operation:

• Mode Button: Often used for toggling modes, setting tempo, or confirming selections. For example, with the JamMan, tapping the Mode switch can set the tempo for recording. Pressing and holding can undo a loop or overdub.
• Up/Down Buttons: Typically used for navigating presets, selecting loops, or incrementing/decrementing values. With the JamMan, these buttons allow you to switch between different recorded loops.

Compatibility Notes:

• When used with the Eleven Rack, the 'Mode' button may serve as FUNCTION B, 'Down' as FUNCTION A, and 'Up' may toggle FUNCTION B then FUNCTION A in quick succession. Note that some specific functions, like Wah, might require simultaneous toggling not supported by the 'Up' button's rapid succession.
• For pedals like the DigiTech JH Experience and Brian May pedals, the FS3X can provide easier control for functions that might otherwise require hard presses on expression pedal switches.
• With the UA OX box, the FS3X can be assigned to control functions like reverb, delay, EQ, and compression. Ensure these functions are assigned within the OX box software.

Maintenance

The DigiTech FS3X is built with a durable metal chassis designed for longevity. To maintain its condition and ensure reliable operation:

• Wipe the unit with a soft, dry cloth to remove dust and debris.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
• Ensure all cable connections are secure and free from dust or foreign objects.
• Store the unit in a dry environment, away from extreme temperatures and humidity.

Troubleshooting

If you encounter issues with your FS3X, try the following troubleshooting steps:

No Response from Foot Switch:

• Cable Connection: Ensure the 1/4-inch TRS cable is securely connected to both the FS3X and your DigiTech device's footswitch input.
• Device Configuration: Verify that your DigiTech device is powered on and correctly configured to accept external footswitch input. Consult your primary device's manual for specific settings.
• Cable Integrity: Test with a different 1/4-inch TRS cable if available. A faulty cable can prevent proper communication.

Incorrect Functionality:

• Compatibility: Confirm that the FS3X is compatible with your specific DigiTech product. While broadly compatible, some devices may have unique requirements.
• Device Settings: Ensure the primary device's settings are correctly configured for an external footswitch. Footswitch assignments are typically customizable within the device's menu or software.
• Footswitch Type: The FS3X is a momentary-style footswitch. Some devices might require a latching footswitch for certain functions.

Specifications

Warranty and Support

For detailed warranty information, product registration, and technical support, please visit the official DigiTech website or contact DigiTech customer service directly. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.