anslut 019451 Work Lamp LED Instruction Manual

SYMBOLS

TECHNICAL DATA

Rated voltage                                    230 V ~ 50 Hz Output              30 W
Luminous flux                                  2550 lm
Colour temperature                          4000 K Colour tone           Cold white
Protection rating                              IP65
Cord length                                      1.5 m
Size                                                  30.5 x L22.5 x

DESCRIPTION

Work lamp with stand that has easy-to-grip handle. Adjustable lamp housing made of aluminium and toughened floodlight glass with LED light source. The lamp is dustproof, protected from running water and approved for indoor and outdoor use.

ASSEMBLY

Assemble the product as shown in the figures. FIG. 1-3

MAINTENANCE

RECYCLING

Recycle end-of-life product in accordance with local regulations. The light source should be removed from the lamp and recycled separately. See description of method below.

1. Undo the nuts and screws between the stand and floodlight by hand.
2. Cut the top corner of the floodlight housing with a hacksaw..FIG. 4
   
3. Insert a flat-tip screwdriver in the gap between the glass and the casing, and carefully pry both parts apart. Stick another screwdriver between the glass and the casing and carefully bend apart.
   Continue along the edge round the lamp until the glass comes loose. FIG. 5
   
   
4. Lift off the glass to access the LED light source. FIG. 6
   
5. Remove the light

 

 

Read More About This Manual & Download PDF:

Documents / Resources

anslut 019451 Work Lamp LED [pdf] Instruction Manual 019451, Work Lamp LED, 019451 Work Lamp LED, Lamp LED, LED

References

• User Manual