anslut 018817 LED Work Lamp

SAFETY INSTRUCTIONS

• The product must be connected to an earthed power point.
• Keep power cords and extension cords away from cutting tools, sharp objects and other potential risks I such as wet floors and solvents.
• Check at regular intervals all electrical connections and power cords for damage. Rectify any faults before using the light. Always have the wiring and connections checked by an authorised electrician.
• Check that the mains voltage corresponds to the rated voltage on the type plate.
• Do not use the product in an explosive environment, e.g. near flammable liquids, gas or dust. Do not use the product near flammable materials.
• Do not look directly into the light source.
• Do not use the product if t he glass front is cracked or damaged. The product must be discarded if the glass fr is cracked or damaged.
• The light source is not replaceable. The entire product must be replaced if it stops working.
• The external flexible cable cord of this luminaire cann be replaced; if the cord is damaged, the luminaire shall be destroyed.
• The minimum distance between the product and an illuminated object is one metre.

WARNING

• The product gets very hot when in use – risk of burn injuries.
• Keep flammable materials away from the product.
• Make sure there is enough ventilation to prevent the product getting too hot.

SYMBOLS

Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

DESCRIPTION

Portable LED work lamp with reel. The lamp has two output modes to adjust the light to requirements.

FIG. 1

1. Handle
2. Lamp
3. Power switch
4. Cord

Documents / Resources

	anslut 018817 LED Work Lamp [pdf] Instruction Manual 018817, LED Work Lamp, 018817 LED Work Lamp, Work Lamp
	anslut 018817 LED Work Lamp [pdf] Instruction Manual 018817, LED Work Lamp, 018817 LED Work Lamp, Work Lamp, Lamp

References

• User Manual