anslut 019927 Work Lamp with Magnification LED
SAFETY INSTRUCTIONS
- Only intended for indoor use.
- Never attempt to dismantle or repair the product yourself. Any repairs must be carried out by an authorised electrician.
- Pull out the plug before cleaning and maintenance.
- A damaged power cord must be replaced by an authorised service centre, or a qualified person, to ensure safe use.
- Do not connect the product to the mains while it is still in the pack.
- Do not look directly into the light when it is switched on. Never point the beam at the eyes of people or animals.
- The light source is not replaceable. Discard the product if the light source stops working.
| SYMBOLS | |
 |
Read the instructions. |
 |
Approved in accordance with the relevant directives. |
 |
Recycle discarded product in accordance wit h loca l regulations. |
 |
Safety class 11. |
 |
Risk of electric shock. |
TECHNICAL DATA
- Rated voltage 230 V ~ 50 Hz
- Output 10W
- Luminous flux 730 Im
- Life span 25 ooo h
- Diffusion angle 120°
- Cord length 1.5 m
DESCRIPTION
Work lamp with magnification adjustable both horizontally and vertically. Fastens to workbench/table and provides a reflection-free light.
USE
- Place the product in the required place.
- Plug the plug into a powerpoint.
- Turn the light on with the switch.
MAINTENANCE
Wipe the product with a dry, soft cloth when necessary.
Documents / Resources
 |
anslut 019927 Work Lamp with Magnification LED [pdf] Instruction Manual 019927, Work Lamp with Magnification LED, 019927 Work Lamp with Magnification LED |
