Hewei Elektroniese Tegnologie HW58R12-WBDB Multi Protokol RFID Leser Module Eienaar se Handleiding
Product Specification Product
Produk Model: HW58R12-WBDB/HW59R12-XYLSProduct
| Datum | Weergawe | Voorbereiding | Gekontroleer | Change content | Opmerkings |
| 24/07/11 | V1.0 | Xiaobing XU | Wang Hanping | Original Drafting | |
Produkbeeld:
| Speld 1 | Speld 2 | Speld 3 | Speld 4 | Speld 5 |
| VCC | GND | RXD | TXD | GND |
Kenmerke en funksies
- This module is a 13.56MHz RFID read/write module developed based on a multi-protocol readerchip；The reader chip supports ISO/IEC 14443 Type A/Type B protocols. Supports mobile payment applications such as Apple Pay and Samsung Pay. Supports P2P passive initiator mode under ISO/IEC 18092. Supports ISO/IEC 15693 protocol. Complies with EMV 3.0/3.1 certification, including electrical, protocol, and mobile compatibility tests. The module comes pre-integrated with operational commands for reading Mifare1 S50/S70, Mifare UltraLight, MifareDESFire, CPU cards, and second-generation Chinese resident ID cards.
- Wye bedryf voltage range: 5V–24V；
Supports RS232 serial communication with adjustable baud rate； - Automatically detects card presence and outputs data via serial port；
- Supports Low Power Card Detection (LPCD)；
- LED Indicator Light Prompt.
Tegniese spesifikasies
| Produk Naam | Multi-protocol RFID Reader Module |
| Product Model | HW58R12-WBDB/HW59R12-XYLS |
| Produk afmetings | 65*42 mm |
| Bedryfsomgewing | Operating Temperature: -40 to 85℃Maximum Humidity: 5%~95% RH, non-condensing and non-freezing |
| Operating frequency | 13.56mHz |
| Contactless Card | Contactless smart cards supporting ISO/IEC 14443 Type A/Type B protocols Contactless smart cards compliant with ISO/IEC 15693 protocol |
| Card Reading Distance | ≤4 cm |
| Kommunikasiemetode | RS232 serial communication, transmission rate: 19200 bps |
| Kragtoevoer | DC 12V, supports input range of 5~ 24V |
| Kragverbruik | Standby: <0.3W |
| Aanwyser | Power indicator light |
| Ander eienskappe | Provides interface functions or interface command sets, supports custom development. |
Conformal coating follows the following standards：
- Spray coating thickness: 0.1-0.3 mm, with a cured thickness of 40-60 µm.
- Conformal coating bubble standards: Bubbles are allowed on the plastic body or insulating parts of components, and small bubbles within the coating are acceptable. Only a single bubble enclosing a single part of a conductor is acceptable; bubbles between the component leads are not acceptable.
- Exposed copper with tin plating, connectors, and power components should not be coated with conformal coating.
- Components within 3 mm around the connectors do not require conformal coating, but a clear isolation strip of conformal coating must be present around the connectors.
- No conformal coating is allowed within a 5 mm diameter of positioning holes, and holes should not be filled.
- All IC component leads must be coated with conformal coating, and there should be visible traces of conformal coating on the body.
Salt Spray Testing is conducted in accordance with the following standards：
FCC verklaring
- hierdie toestel mag nie skadelike steurings veroorsaak nie.
- hierdie toestel moet enige steuring wat ontvang word aanvaar, insluitend steuring wat ongewenste werking kan veroorsaak.
Let wel: Hierdie toerusting is getoets en gevind dat dit voldoen aan die limiete vir 'n Klas B digitale toestel, ooreenkomstig deel 15 van die FCC Reëls. Hierdie perke is ontwerp om redelike beskerming teen skadelike inmenging in 'n residensiële installasie te bied. Hierdie toerusting genereer gebruike en kan radiofrekwensie-energie uitstraal en, indien dit nie geïnstalleer en gebruik word in ooreenstemming met die instruksies nie, kan dit skadelike steurings vir radiokommunikasie veroorsaak. Daar is egter geen waarborg dat inmenging nie in spesifieke installasie sal voorkom nie. Indien hierdie toerusting wel skadelike steurings vir radio- of televisie-ontvangs veroorsaak, wat bepaal kan word deur die toerusting af en aan te skakel, word die gebruiker aangemoedig om die steuring deur een of meer van die volgende maatreëls te probeer regstel:
- Heroriënteer of verskuif die ontvangsantenna.
- Verhoog die skeiding tussen die toerusting en ontvanger.
- Koppel die toerusting aan 'n uitlaat op 'n stroombaan anders as dié waaraan die ontvanger gekoppel is.
- Raadpleeg die handelaar of 'n ervare radio-/TV-tegnikus vir hulp.
Veranderinge of wysigings wat nie uitdruklik goedgekeur is deur die party wat verantwoordelik is vir voldoening nie, kan die gebruiker se magtiging om die toerusting te gebruik, vernietig.
FCC Bestralingsblootstellingsverklaring
Hierdie toestel voldoen aan FCC RF-stralingsblootstellingslimiete wat vir 'n onbeheerde omgewing uiteengesit is. Hierdie sender moet nie saamgeplaas word of saam met enige ander antenna of sender werk nie.
Hierdie toestel moet met 'n minimum afstand van 20 cm tussen die verkoeler en die gebruikersliggaam werk
Dokumente / Hulpbronne
 |
Hewei Elektroniese Tegnologie HW58R12-WBDB Multi Protokol RFID Leser Module [pdf] Eienaar se Handleiding HW58R12-WBDB, HW58R12-WBDB Multi Protocol RFID Reader Module, Multi Protocol RFID Reader Module, RFID Reader Module, Reader Module, Module |