AeroCool Hive High Performance Mid Tower Case User Manual

Front I/O Panel Cable Connection

Front Panel Connector
(Please refer to the motherboard’s manual for further instructions).

Note : Specifications may vary depending on your region. Contact your local retailer for more information.

Accessory Bag Contents

1. SSD Screw MB Screw
   
2. PSU Screw PCI Screw
   
3. HDD Screw
   
4. Fan Screw
   

How to install Guide

1. Install Motherboard
   Install Motherboard
   
2. Install PSU
   Install PSU
   
3. Install Add-on Card
   
   
4. Install 2.5″ SSD
   a) Install 2.5” SSD x 2
   
   b) Install 2.5” SSD x 2
   
   (4c) Install 2.5” SSD x 1
   
   
5. Install 2.5″ SSD
   a) Install 2.5” SSD x 1
   
   b) Install 2.5” SSD x 2
   
6. Install the radiator
   a) Install Front Radiator
   
   b) Install Front Radiator
   
   6c) Install Rear Radiator
   
7. Install Fan
   a) Install Front Fans
   
   b) Install Rear and Top Fan
   
   c) Install PSU Fans
   

I/O Panel

*LED Control Button Instructions

Press and hold LED control button for 2 sec to switch between MB and LED button
control mode. To Turn off the LED, cycle through the LED modes.

Note : Specifications may vary depending on your region. Contact your local retailer for more information.

Points de collecte sur www.quefairedemesdechets.fr

Documents / Resources

AeroCool Hive High Performance Mid Tower Case [pdf] User Manual Hive High Performance Mid Tower Case, High Performance Mid Tower Case, Performance Mid Tower Case, Mid Tower Case, Tower Case, Case

References

• User Manual