AeroCool PYTHON High-performance Mid Tower Case

Front I/O Panel Cable Connection

Front Panel Connector

(Please refer to the motherboard’s manual for further instructions).

Note: Specifications may vary depending on your region. Contact your local retailer for more information.

Accessory Bag Contents

1. SSD Screw
   ODD Screw
   MB Screw
   
2. HDD Screw
   
3. PSU Screw
   PCI Screw
   
4. MB Standoff
   
   Cable tie
   

How to install Guide

1. Install Motherboard
   
2. Install PSU
   
3. Install add-on Card
   
4. Install 3.5” HDD x 2
   
   
   
   
5. Install 2.5” SSD x 3
   
   
   
   
6. Install TOP Fans
   
7. Install Front Radiator
   
   1. Install Top Radiator
      

I/O Panel

LED Lighting Modes – 60 Modes

Note : Specifications may vary depending on your region.
Contact your local retailer for more information.

RGB Fan Hub

1. Use the Molex connector (A) to connect the hub (B) with your power supply unit.
2. For Addressable RGB motherboard: Use the 3-Pin motherboard connector (C) to connect to the socket (D) with your Addressable RGB motherboard (larger connector (E) for Asus Aura Sync / MSI Mystic Light Sync and smaller connector (F) for Gigabyte RGB Fusion).
   1. For non-Addressable RGB motherboard: Connect the 2-Pin LED/RGB SW connector (G) with your hub.
3. Use the RGB 5V fan connectors (H) to connect the Addressable RGB fans with your hub.

Documents / Resources

AeroCool PYTHON High-performance Mid Tower Case [pdf] User Manual PYTHON, High-performance Mid Tower Case, Mid Tower Case, Tower Case, ARGB Mid Tower Case, Mid Tower Case

References

• User Manual