1. Introduction
Thank you for choosing the Junsun Portable EV Charger. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EV charger. Please read this manual thoroughly before using the product and keep it for future reference.
The Junsun Portable EV Charger is designed to provide convenient and reliable charging for a wide range of electric vehicles. It features adjustable current settings, temperature protection, and robust construction for various environmental conditions.
Figure 1: Junsun Portable EV Charger Overview
2. Product Features
- Adjustable Current: 6A-8A-10A-13A-16A-20A-24A-32A switching.
- Voltage: 195V~240V (for 1-phase) / 395V~480V (for 3-phase).
- Power: 0~22KW (depending on model).
- IP Rating: IP65 for control box, IP54 for charging interface, IP44 for CEE power plug.
- Safety Features: Double temperature control, AC30mA current protection, and AC30mA+DC6mA leakage protection for 11KW and 22KW models.
- User Interface: Digital display for real-time power, voltage, current, temperature, and charging status.
- Scheduled Charging: Ability to set a delayed start time for charging.
- Universal Compatibility: Compatible with all electric vehicles that use Type 2 (IEC 62752) female connectors.
3. Setup and Installation
3.1 Compatibility Check
Ensure your electric vehicle is compatible with a Type 2 (IEC 62752) charging interface. The Junsun Portable EV Charger is designed for universal compatibility with most Type 2 EVs.
Figure 2: Universal EV Compatibility
Figure 3: Type 2 Interface Compatibility
3.2 Choosing the Correct Plug Type
The charger comes with different plug types (Schuko, Blue CEE, Red CEE) depending on the power rating and phase. Refer to the following guidelines:
- If your charging port is similar to Type A (single phase), a Schuko or Blue CEE plug is recommended.
- If your charging port is similar to Type B (three phase), a Red CEE plug is recommended.
Important Note: If you purchase an 11KW or 22KW charger but your car does not support 3-phase power, the device will automatically reduce the power to a maximum of 3.5KW or 7KW to protect your vehicle.
Figure 4: Plug Type Selection Guide
3.3 Grounding
The charger supports both grounded and ungrounded operation. For optimal safety, it is recommended to use a grounded power source if available.
3.4 Placement
The Junsun Portable EV Charger is designed for multi-scene use, including rainy, snowy, and sunny environments, thanks to its IP65 control box rating. Ensure the charger is placed in a stable location and the cables are not a tripping hazard.
Figure 5: Portable EV Charger Plug and Play Scenarios
4. Operating Instructions
4.1 Basic Operation
- Connect the charger's power plug to a suitable power outlet.
- Connect the Type 2 charging gun to your electric vehicle's charging port.
- The charger's display will show real-time information.
- To start or stop charging, use the touch controls on the charger.
4.2 Adjusting Current and Setting Schedule
The charger features intuitive touch controls for adjusting the charging current and setting a delayed start time.
- Current Adjustment: Short press the 'A' button (or similar current adjustment button) to cycle through available current settings (6A, 8A, 10A, 13A, 16A, 20A, 24A, 32A). The charger will remember the last selected current value for future charges.
- Scheduled Charging: Long press the timer button (often labeled with a clock icon) for 1-1.5 seconds to enter the settings page. Short press to adjust the desired delay time (up to 10 hours). Long press again to confirm. The charger will start charging after the set delay.
Figure 6: Charger Interface and Controls
Video 1: Demonstration of current adjustment and scheduled charging on the Junsun EV Charger.
5. Maintenance
5.1 General Care
- Keep the charger clean and free from dust and debris.
- Avoid dropping or subjecting the charger to strong impacts.
- Ensure all connections are secure before and during charging.
5.2 Environmental Protection
The charger's control box has an IP65 rating, making it resistant to dust and water jets. It is designed to withstand temperatures from -30°C to +50°C.
Figure 7: Environmental Resistance
5.3 Temperature Control Protection
The charger incorporates a temperature control chip to prevent excessive temperature during prolonged charging. It automatically reduces current if the temperature exceeds 70°C and cuts off power within 0.2 seconds if it reaches 85°C. Charging automatically resumes when the temperature drops below 65°C.
Figure 8: Temperature Control Protection
6. Troubleshooting
6.1 Reduced Charging Power
If you experience lower than expected charging power (e.g., an 11KW charger only delivering 3.5KW), this is typically due to your vehicle not supporting 3-phase power. The charger automatically reduces power to protect your car.
6.2 Leakage Protection
The charger is equipped with leakage protection. For 3.5KW and 7KW models, it provides AC 30mA protection. For 11KW and 22KW models, it offers enhanced AC 30mA + DC 6mA leakage protection.
6.3 Other Issues
If you encounter any other issues not covered here, please refer to the warranty and support section for assistance.
7. Specifications
7.1 General Specifications
| Attribute | Value |
|---|---|
| Brand Name | Junsun |
| IP Rating | IP65 (Control Box) |
| Voltage | 195V~240V/395V~480V |
| Current | 6-8-10-13-16-20-24-32A Switching |
| Power (W) | 0~22KW |
| Material | TPU |
| Weight | 2.5~4KG |
| Length | 4/5/8/10 Meters |
| CEE power plug IP rating | IP44 |
| Charging interface IP rating | IP54 |
| Frequency | 50/60HZ |
7.2 Model-Specific Specifications
Figure 9: BF APP Model Specifications
Figure 10: SY Model Specifications
Figure 11: SYB Model Specifications
Figure 12: ASY Model Specifications
8. Warranty and Support
Junsun offers a 2-year quality assurance for this product. In case of damage, a replacement will be provided within 365 days.
8.1 Certifications
The Junsun Portable EV Charger is certified with UKCA, TUV, and CE, ensuring compliance with relevant safety and quality standards.
Figure 13: Product Certifications
9. User Tips
- The charger will remember the current setting from your last charge, making it convenient for regular use.
- While the charger can operate without a ground connection, using a grounded power source is always recommended for enhanced safety.
- Take advantage of the scheduled charging feature to charge during off-peak hours, potentially saving on electricity costs.
