1. Introduction
Thank you for choosing the WYBOT Osprey 200 Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before first use and keep it for future reference.
2. Important Safety Instructions
WARNING: Read and follow all instructions carefully to avoid injury or damage.
- Ensure the charging port is dry before connecting the charger.
- Do not operate the cleaner if the power cable or charger is damaged.
- Keep children and pets away from the pool area while the cleaner is operating.
- Only use the provided charger for the device.
- Do not attempt to repair the unit yourself. Contact qualified service personnel.
- Remove the cleaner from the pool before adding chemicals or performing maintenance.
3. Product Overview
The WYBOT Osprey 200 is a cordless robotic pool cleaner designed for efficient and hassle-free pool maintenance. Its intelligent navigation and powerful cleaning capabilities ensure a sparkling clean pool with minimal effort.
Key Features:
- Cordless Design: Eliminates tangled cables and risk of electrocution.
- Intelligent Navigation: Detects walls, reverses direction, and automatically approaches the shore when battery is low or cleaning is complete.
- Efficient Cleaning: Double traction, two floor scrapers, and a 180μm fine filter for thorough dirt, sand, and leaf removal.
- Quick Charging: Fully charges in 3-4 hours.
- Lightweight: Weighs only 3.6 kg (6.6 lbs) for easy handling and lifting.
- IPX8 Waterproof: Designed for continuous immersion in water.
4. Specifications
| Feature | Detail |
|---|---|
| Model Name | Osprey 200 |
| Brand | WYBOT |
| Material | Plastic |
| Color | White / Blue |
| Power Source | Battery Powered |
| Battery Life | Up to 50 minutes |
| Charging Time | 3-4 hours |
| Filter Fineness | 180μm |
| Weight | 3.6 kg (6.6 lbs) |
| Max Pool Surface Area | 50 m² (500 ft²) |
| Max Water Depth | < 6.6 ft |
| Compatible Pool Types | Flat bottom pools (<15° tilt), detachable and recessed pools |
| Compatible Pool Surfaces | PVC, tile, vinyl |
| Compatible Pool Shapes | Round, rectangular, oval |
| Waterproof Rating | IPX8 |
| Control Method | Touch (Single button operation) |
| Assembly Required | No |
| Special Features | Two additional lower scrapers, intelligent navigation |
5. Setup and First Use
5.1 Charging the Cleaner
- Ensure the cleaner is completely dry before charging.
- Connect the charger to a power outlet and then to the cleaner's charging port.
- Allow 3-4 hours for a full charge. The indicator light on the cleaner will change to indicate charging status (refer to product for specific light indications).
- Once fully charged, disconnect the charger from the cleaner and the power outlet.
5.2 Placing the Cleaner in the Pool
- Gently lower the cleaner into the pool. It will slowly sink to the bottom.
- Ensure the cleaner is fully submerged before starting operation.
6. Operating Instructions
6.1 Starting a Cleaning Cycle
- Once the cleaner is submerged, press the power button (usually located on the top of the unit) to start the cleaning cycle.
- The cleaner will begin its automatic cleaning pattern.
6.2 Intelligent Navigation
The Osprey 200 features smart sensor technology:
- When encountering an obstacle (like a pool wall), the cleaner will automatically reverse direction.
- Upon completion of its cleaning cycle or when the battery is low, the cleaner will automatically approach the nearest edge of the pool for easy retrieval.
6.3 Retrieving the Cleaner
When the cleaning cycle is complete or the battery is low, the cleaner will move to the pool edge.
- Use the included hook (compatible with standard poles, not included) to gently lift the cleaner out of the water.
- Allow excess water to drain before removing it completely from the pool.
7. Maintenance
7.1 Cleaning the Filter
Regularly clean the filter to maintain optimal cleaning performance.
- After each cleaning cycle, remove the cleaner from the pool.
- Locate and remove the filter cap.
- Rinse the filter thoroughly with a hose to remove all collected debris, sand, and leaves.
- Ensure the filter is clean before reinserting it and closing the cap.
7.2 Storage
- Store the cleaner in a cool, dry place away from direct sunlight when not in use.
- Ensure the cleaner is clean and dry before long-term storage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not start | Low battery; Power button not pressed correctly | Charge the cleaner fully; Ensure the power button is pressed firmly. |
| Poor cleaning performance | Clogged filter; Low battery; Obstruction in brushes/scrapers | Clean the filter; Charge the cleaner; Check and clear any obstructions. |
| Cleaner gets stuck | Large debris; Uneven pool surface (beyond specified tilt) | Remove large debris manually; Ensure pool meets specifications. |
| Cleaner does not return to edge | Battery completely depleted; Sensor malfunction | Manually retrieve the cleaner; Contact customer support if issue persists. |
9. User Tips
- For best results, run the cleaner regularly to prevent excessive debris buildup.
- Always ensure the pool water chemistry is balanced for optimal cleaner performance and longevity.
- If your pool has very fine dust, consider running the cleaner more frequently or pre-filtering with a skimmer net.
- Periodically check the wheels and scrapers for wear and tear.
10. Warranty and Support
The WYBOT Osprey 200 comes with a limited warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact the seller or manufacturer's customer service.
Keep your proof of purchase for warranty purposes.
