User Manual: OKIN CB3332 CB.33.32.02 Control Box

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the OKIN CB3332 CB.33.32.02 Control Box. This control box is designed to be a replacement or component for electric adjustable base bed frames, specifically compatible with models such as the RIZE HOME Remedy I and II. Please ensure your existing control box model matches CB3332 CB.33.32.02 for proper compatibility.

2. Product Overview

The OKIN CB3332 CB.33.32.02 Control Box is a central unit for managing the various motor functions of an adjustable bed frame. It features multiple ports for motor connections, power input, USB charging, and control buttons for pairing and synchronization.

2.1 Control Box Layout (Top View)

Figure 1: Top view of the control box with labeled ports and indicators.

• POWER: Power indicator light.
• USB: Two USB ports for charging external devices.
• SYNC: Button/indicator for synchronization functions.
• PAIR: Button for pairing with a remote control.
• HEAD MOTOR: Connection point for the head motor.
• FOOT MOTOR: Connection point for the foot motor.
• LUMBAR MOTOR: Connection point for the lumbar motor.
• MASSAGE: Connection point for the massage motor.

2.2 Connection Ports (Side View)

Figure 2: Side view showing motor and power input connectors.

2.3 Product Label

Figure 3: Product label with detailed specifications.

3. Specifications

4. Setup Instructions

1. Unpacking: Carefully remove the control box from its packaging. Inspect for any visible damage.
2. Motor Connection: Connect the cables from your bed frame's Head, Foot, Lumbar, and Massage motors to their corresponding ports on the control box. Ensure each connection is secure. Refer to Figure 2 for port locations.
3. Power Connection: Connect the power cable from your bed frame's power supply to the round power input port on the control box.
4. Power On: Plug the power supply into a wall outlet. The POWER indicator on the control box should illuminate.
5. Remote Pairing:
   • Locate the 'PAIR' button on the control box (see Figure 1).
   • Press and hold the 'PAIR' button for approximately 3 seconds until an indicator light (often on the remote or control box) begins to flash.
   • Immediately follow the pairing instructions provided with your specific remote control. This usually involves pressing a button on the remote within a few seconds of activating the 'PAIR' mode on the control box.
   • Once successfully paired, the indicator light will stop flashing, and your remote should now control the bed frame.
6. Synchronization (if applicable): If your bed frame system requires synchronization (e.g., for dual bases), use the 'SYNC' button on the control box as per your bed frame's primary instruction manual.

5. Operating Instructions

Once the control box is set up and paired with your remote control, you can operate your adjustable bed frame using the remote. The control box acts as the intermediary between your remote and the bed's motors.

• Motor Control: Use the corresponding buttons on your remote control to adjust the Head, Foot, and Lumbar sections of your bed.
• Massage Function: Activate and control the massage features of your bed frame via your remote.
• USB Charging: The two USB ports on the control box (see Figure 1) can be used to charge small electronic devices such as smartphones or tablets. Connect your device's USB charging cable to one of these ports.

6. Maintenance

• Cleaning: Keep the control box clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or abrasive materials.
• Environment: Ensure the control box is placed in a dry environment, away from direct sunlight, heat sources, and moisture.
• No User Serviceable Parts: The control box contains no user-serviceable parts. Do not attempt to open or repair the unit yourself, as this will void the warranty and could cause damage or injury.

7. Troubleshooting

7.1 Bed Frame Unresponsive

• Check Power: Ensure the control box is plugged into a working power outlet and the POWER indicator light is on.
• Check Connections: Verify that all motor cables and the main power cable are securely connected to the control box.
• Remote Batteries: Ensure your remote control has fresh batteries (batteries are not included with the control box).
• Re-pair Remote: Attempt to re-pair your remote control with the control box following the steps in Section 4.5.

7.2 Motors Not Functioning Correctly

• Specific Motor Check: If only one motor is not working, check its specific connection to the control box.
• Obstructions: Ensure there are no physical obstructions preventing the bed frame's movement.

7.3 USB Ports Not Charging

• Power Supply: Confirm the control box is powered on.
• Cable Check: Try a different USB cable and device to rule out issues with the charging cable or the device itself.

If troubleshooting steps do not resolve the issue, please refer to the Warranty & Support section.

8. User Tips

• Remote Compatibility: While this control box is compatible with the listed bed frames, ensure your specific remote control is also compatible. If replacing an old remote, verify its model number or consult with your retailer.
• Secure Connections: Always double-check that all motor and power cables are firmly seated in their respective ports to prevent intermittent operation.

9. Warranty & Support

This OKIN CB3332 CB.33.32.02 Control Box typically comes with a 3-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your original retailer or the manufacturer directly. When contacting support, be prepared to provide the following information:

• Product Model Number: CB3332 CB.33.32.02
• Serial Number (found on the product label, see Figure 3)
• Date of Purchase
• Description of the issue